Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Max Cutting Height | 33 ft (10 m) |
Max Loading Height | 23.6 ft (7 m) |
Max Vertical Wall Digging Depth | 19.7 ft (6 m) |
Shipping Height of Unit | 9.7 ft (3 m) |
Shipping Length of Unit | 31.3 ft (10 m) |
Max Cutting Height | 31.8 ft (10 m) |
Max Digging Depth | 20.3 ft (6 m) |
Max Loading Height | 22.5 ft (7 m) |
Max Reach Along Ground | 30.4 ft (9 m) |
Max Vertical Wall Digging Depth | 17.4 ft (5 m) |
Shipping Height of Unit | 10.5 ft (3 m) |
Shipping Length of Unit | 31.5 ft (10 m) |
Maximum Bucket Capacity | 1.5 cu yd (1 cu m) |
Minimum Bucket Capacity | 0.8 cu yd (1 cu m) |
Reference Bucket Capacity | 1.2 cu yd (1 cu m) |
Ground Clearance | 1.5 ft (0 m) |
Height - Top of Cab | 9.7 ft (3 m) |
Length of Track on Ground | 12.1 ft (4 m) |
Removal Counterweight Clearance | 3.4 ft (1 m) |
Tail Swing Radius | 9.1 ft (3 m) |
Width to Outside of Tracks | 10.5 ft (3 m) |
Aspiration | Turbocharged air to air charge cooler |
Displacement | 414 cu in (0 cu m) |
Engine Model | 6068H |
Net Power | 159 hp (119 kw) |
Power Measured @ | 2000 rpm |
Alternator Supplied Amperage | 80 amps |
Cooling System Fluid Capacity | 6.9 gal (26 l) |
Engine Oil Capacity | 6.1 gal (23 l) |
Fuel Capacity | 105.7 gal (400 l) |
Hydraulic Pump Flow Capacity | 112.1 gpm (424 lpm) |
Hydraulic System Fluid Capacity | 63.5 gal (240 l) |
Hydraulic System Relief Valve Pressure | 4980 psi |
Operating Voltage | 24 volts |
Swing Drive Fluid Capacity | 1.7 gal (6 l) |
Swing Speed | 13.3 rpm |
Drawbar Pull | 45620 lbs (20,693 kg) |
Ground Pressure | 5.3 psi |
Max Travel Speed | 3.5 mph (6 kph) |
Number of Carrier Rollers per Side | 2 |
Number of Shoes per Side | 49 |
Number of Track Rollers per Side | 8 |
Shoe Size | 31.5 in (80 cm) |
Track Gauge | 7.9 ft (2 m) |