John Deere 510 P-Tier Excavator Specs

Category: Excavators ➔
Manufacturer: John Deere ➔
Model: 510 P-Tier ➔

Cooling

John Deere 510 P-Tier Excavator Cooling specifications
Cooling system type	Reversing electric variable-speed fan drive - Starting 2026

Cylinders

John Deere 510 P-Tier Excavator Cylinders specifications
Arm cylinder bore (in.)	7.50 in (19.05 cm) - Starting 2026
Arm cylinder rod diameter (in.)	5.10 in (12.95 cm) - Starting 2026
Arm cylinder stroke (in.)	76.40 in (194.06 cm) - Starting 2026
Boom cylinder bore (in.)	6.70 in (17.02 cm) - Starting 2026
Boom cylinder rod diameter (in.)	4.50 in (11.43 cm) - Starting 2026
Boom cylinder stroke (in.)	62.60 in (159.00 cm) - Starting 2026
Bucket cylinder bore (in.)	6.70 in (17.02 cm) - Starting 2026
Bucket cylinder rod diameter (in.)	4.70 in (11.94 cm) - Starting 2026
Bucket cylinder stroke (in.)	52.20 in (132.59 cm) - Starting 2026
Cylinders type	Heat-treated, chrome-plated, polished cylinder rods; hardened steel (replaceable bushings) pivot pins - Starting 2026
Number of arm cylinders	1.0 - Starting 2026
Number of boom cylinders	2 - Starting 2026
Number of bucket cylinders	1.0 - Starting 2026

Electrical

John Deere 510 P-Tier Excavator Electrical specifications
Alternator rating (amp)	300.0 amp - Starting 2026
Battery capacity (CCA)	1400.0 CCA - Starting 2026
Battery voltage (V)	12.0 v - Starting 2026
Number of batteries	2 - Starting 2026
Work lights	9 LED: 1 mounted on frame, 2 mounted on boom, 2 mounted on top of cab, 1 rear-facing top of cab, 1 mounted on counterweight, 1 mounted on left-side handrail, and 1 mounted on right-side handrail - Starting 2026

Engine

John Deere 510 P-Tier Excavator Engine specifications
Aspiration type	Turbocharged, air-to-air charge-air cooler - Starting 2026
Cylinders	6 - Starting 2026
Displacement (cu in.)	549.00 cu in (8,996.52 cu cm) - Starting 2026
Manufacturer	John Deere - Starting 2026
Net power (rpm)	2000.0 rpm - Starting 2026
Net power at net power rpm (ISO 9249) (hp)	367.00 hp (273.68 kw) - Starting 2026
Non-road emission standards	EPA Final Tier 4/EU Stage IV - Starting 2026
Off-level capacity (%)	70.0 % - Starting 2026
Off-level capacity (degrees)	35.0 degrees - Starting 2026

Hydraulics

John Deere 510 P-Tier Excavator Hydraulics specifications
Controls type	Pilot levers, short stroke, low-effort hydraulic pilot controls with shutoff lever - Starting 2026
Hydraulics type	Open center, load sensing - Starting 2026
Implement circuits system operating pressure (psi)	4627.0 psi - Starting 2026
Main pump maximum rated flow per pump (gpm)	106.00 gpm (401.21 lpm) - Starting 2026
Main pump type	2 variable-displacement pumps - Starting 2026
Number of pumps	2 - Starting 2026
Pilot pump maximum rated flow (gpm)	8.90 gpm (33.69 lpm) - Starting 2026
Pilot pump number of gears	1 - Starting 2026
Pilot pump pressure setting (psi)	566.0 psi - Starting 2026
Power boost system operating pressure (psi)	5120.0 psi - Starting 2026
Swing circuits system operating pressure (psi)	4119.0 psi - Starting 2026
Travel circuits system operating pressure (psi)	5120.0 psi - Starting 2026

Powertrain

John Deere 510 P-Tier Excavator Powertrain specifications
Drawbar pull (lb)	73,937.00 lbs (33,537.30 kg) - Starting 2026
Maximum travel speed high/fast (mph)	3.40 mph (5.47 kph) - Starting 2026
Maximum travel speed low/slow (mph)	2.40 mph (3.86 kph) - Starting 2026
Powertrain type	2-speed propel with automatic shift - Starting 2026

Refill Capacities

John Deere 510 P-Tier Excavator Refill Capacities specifications
Cooling system (qt)	50.0 qt - Starting 2026
Diesel-exhaust fluid (DEF) (qt)	75.2 qt - Starting 2026
Engine oil with filter (qt)	32.0 qt - Starting 2026
Fuel tank (gal.)	178.00 gal (673.73 l) - Starting 2026
Hydraulic system (gal.)	135.00 gal (510.98 l) - Starting 2026
Hydraulic tank (gal.)	82.00 gal (310.37 l) - Starting 2026
Swing gearbox (qt)	6.8 qt - Starting 2026
Travel gearbox (gal.)	2.90 gal (10.98 l) - Starting 2026

Swing Mechanism

John Deere 510 P-Tier Excavator Swing Mechanism specifications
Speed (rpm)	9.5 rpm - Starting 2026
Torque (lb-ft)	109,159.00 lbs ft (147,997.78 nm) - Starting 2026

Undercarriage

John Deere 510 P-Tier Excavator Undercarriage specifications
Number of carrier rollers per side	3 - Starting 2026
Number of shoes per side	53 - Starting 2026
Number of track rollers per side	9 - Starting 2026
Track adjustment type	Hydraulic - Starting 2026
Track chain type	Sealed and lubricated - Starting 2026
Track guides	Front and center - Starting 2026

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon