Create a CEG Account  /  CEG Login
☰


John Deere 800R Fertilizer Applicator Specs

Additional Information

John Deere 800R Fertilizer Applicator Additional Information specifications
Beacon Lights Front- and rear-mounted beacon lights — Starting 2026 Model Year
Date Collected 2017-10-10 — Starting 2026 Model Year

Air Boom

John Deere 800R Fertilizer Applicator Air Boom specifications
Air Boom Capacity 300.0 cu ft — Starting 2026 Model Year
Air Boom Spread Width 70.00 ft (21.34 m) — Starting 2026 Model Year
Air Boom Type AB485 Air Boom — Starting 2026 Model Year
Automatic Section Control John Deere Section Control — Starting 2026 Model Year
Box Length 12.00 ft (3.66 m) — Starting 2026 Model Year
Box Material 304 painted stainless steel, 409 painted stainless steel — Starting 2026 Model Year
Box Options Two-bin capable of 50/50 or 60/40 split — Starting 2026 Model Year
Controllable Conveyor RPM Range Bin 1 and Bin 2 running separately: 2-70 rpm, Bin 1 and Bin 2 running at the same time: 2-40 rpm — Starting 2026 Model Year
Controllable Metering RPM Bin 3 (granular bin): 3-61 rpm — Starting 2026 Model Year
Conveyor Dual conveyors (left and right) with stainless-steel chain — Starting 2026 Model Year
Conveyor Application Rates 56-1345 kg/ha, 50-1200 lb per acre, *Assuming 16.1-km/h (10-mph) vehicle speed, 1041.2 kg/m3 (65 lb/cu ft) material, and 3.8-cm (1.5-in.) gate height. This also assumes CFR 0.2758. NOTE: 1345 kg/ha (1200 lb/acre) is the maximum rate between all bins with the assumptions listed above. 56 kg/ha (50 lb/acre) is the minimum rate from a single bin (1 or 2) with the assumptions listed above. — Starting 2026 Model Year
Gate Height Physical Adjustable Range 2.5-5.3 cm, 1-2.1 in., NOTE: The gate is set from the factory at 3.8 cm (1.5 in.). It is not recommended to adjust the gate height below 3.8 cm (1.5 in.) as operators may experience conveyor performance issues such as belt stalling or it may affect rate accuracy. — Starting 2026 Model Year
Metering Application Rates 6.7-139 kg/ha, 6-124 lb per acre, *Assuming a yellow metering roller, 16.1-km/h (10-mph) vehicle speed, and 1041.2 kg/m3 (65 lb/cu ft) material. This also assumes a CFR of 0.0442. — Starting 2026 Model Year
Oiler None — Starting 2026 Model Year
Volumetric Flow Rate Less than 0.74 m3/min, 26.1 cu ft/min NOTE: Plugging of booms may occur if the sum of the flow rate of all bins is greater than spec. NOTE: To calculate the volumetric flow rate per bin: volumetric flow rate (cu ft/min) = (rate (lb/acre) x speed (MPH) x 0.1414)/density (cu ft). Constant of 0.1414 assumes 21.3-m (70-ft) spreading width. — Starting 2026 Model Year

Cab And Controls

John Deere 800R Fertilizer Applicator Cab And Controls specifications
Display 4600 CommandCenter — Starting 2026 Model Year
Lighting Deluxe halogen lighting package Light-emitting diode (LED) lighting package (option) — Starting 2026 Model Year

Chassis, Frame, And Tires

John Deere 800R Fertilizer Applicator Chassis, Frame, And Tires specifications
Air Compressor On-board air compressor — Starting 2026 Model Year
Chassis Dual c-channel frame — Starting 2026 Model Year
Empty Weight With Single Bin 31.00 lbs (14.06 kg) — Starting 2026 Model Year
Front Tires 750/50R26 tires - Alliance, Michelin®, or Trelleborg® (option) — Starting 2026 Model Year
Ladder Raise/Lower Automatic — Starting 2026 Model Year
Parking Brakes IVT and two-wheel (rear) pneumatic parking brake — Starting 2026 Model Year
Primary Brakes IVT and four-wheel pneumatic brakes — Starting 2026 Model Year
Rear Tires 1050/50R32 tires - Alliance or Michelin (option) — Starting 2026 Model Year
Steering Front wheel — Starting 2026 Model Year
Suspension Four-wheel leaf spring and front axle dampers — Starting 2026 Model Year
Turning Radius 39.00 ft (11.89 m) — Starting 2026 Model Year

Dry Spinner Spreader

John Deere 800R Fertilizer Applicator Dry Spinner Spreader specifications
Automatic Section Control John Deere Section Control (G5 box) — Starting 2026 Model Year
Box Length 14.00 ft (4.27 m) — Starting 2026 Model Year
Box Material 409 painted stainless steel 304 stainless steel (option) — Starting 2026 Model Year
Box Options Single bin, Two-bin MultApplier insert (option), Four-bin MultiBin insert (option) — Starting 2026 Model Year
Conveyor Single bin - belt-over chain, MultApplier and MultiBin - belt-over, stainless-steel chain — Starting 2026 Model Year
Dry Spinner Spreader Capacity 330.0 cu ft — Starting 2026 Model Year
Dry Spinner Spreader Spread Width Range 60 to 90 ft — Starting 2026 Model Year
Dry Spinner Spreader Type DN495 Dry Spinner Spreader — Starting 2026 Model Year
Oiler Electric — Starting 2026 Model Year

Key Specs

John Deere 800R Fertilizer Applicator Key Specs specifications
Air Boom Capacity 300.0 cu ft — Starting 2026 Model Year
Air Boom Spread Width 70.00 ft (21.34 m) — Starting 2026 Model Year
Air Boom Type AB485 Air Boom — Starting 2026 Model Year
Chassis Dual c-channel frame — Starting 2026 Model Year
Dry Spinner Spreader Spread Width Range 60 to 90 ft — Starting 2026 Model Year
Dry Spinner Spreader Type DN495 Dry Spinner Spreader — Starting 2026 Model Year
Peak Rated Power 365.00 hp (272.18 kw) — Starting 2026 Model Year
Transport Speed Range 0 to 46 mph — Starting 2026 Model Year

Powertrain

John Deere 800R Fertilizer Applicator Powertrain specifications
Diesel Exhaust Fluid (DEF) Tank Capacity 7.80 gal (29.52 l) — Starting 2026 Model Year
Displacement 584.00 cu in (9,570.07 cu cm) — Starting 2026 Model Year
Fuel Tank Capacity 586.00 gal (2,218.01 l) — Starting 2026 Model Year
Number Of Cylinders 6 — Starting 2026 Model Year
Peak Rated Power 365.00 hp (272.18 kw) — Starting 2026 Model Year
Power Bulge 400.00 hp (298.28 kw) — Starting 2026 Model Year
Transport Speed Range 0 to 46 mph — Starting 2026 Model Year
×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.