The Case 588H is a forklift model used for material handling in construction, industrial, and agricultural applications. Designed for lifting, transporting, and positioning palletized or bulky loads, it is typically valued for its reach, stability, and utility on job sites where standard warehouse forklifts are less suitable. The 588H designation identifies a Case machine within the forklift category, commonly associated with rough-terrain or heavy-duty service depending on configuration. Key specifications may include lift capacity, mast height, engine type, drive system, and tire setup. Exact features vary by production year and equipment configuration.
Capacities
Case 588H Forklift Capacities specifications
Cooling System
4.60 gal (17.41 l)
Engine Oil W/ Filter Change
1.50 gal (5.68 l)
Front Axle
830.00 cu in (13,601.29 cu cm)
Fuel Tank - Diesel
31.50 gal (119.23 l)
Dimensions
Case 588H Forklift Dimensions specifications
Ground Clearance
10.24 in (26.01 cm)
Height
10.42 ft (3.18 m)
Length
17.08 ft (5.21 m)
Max Fork Height
15.00 ft (4.57 m)
Overall Height - Mast Lowered
10.50 ft (3.20 m)
Overall Height, Rops Cab
104.14 in (264.52 cm)
Overall Length
17.11 ft (5.22 m)
Overall Width
7.34 ft (2.24 m)
Turning Radius
11.80 ft (3.60 m)
Weight
16,684.00 lbs (7,567.74 kg)
Wheelbase
6.99 ft (2.13 m)
Width
6.92 ft (2.11 m)
Drive Train
Case 588H Forklift Drive Train specifications
Transmission / Type
Power Shuttle
Travel Speeds - 1st
24.00 mph (38.62 kph)
Engine
Case 588H Forklift Engine specifications
Alternator
120 amps
Bore
3.90 in (9.91 cm)
Displacement
207,480.80 cu in (3,400,008.66 cu cm)
Emission Tier Level
Tier 4
Engine Model
FPT F5HFL463D
Engine Peak Torque
233.10 lbs ft (316.04 nm)
Engine Speed - Rated Speed, Full Load
2200 rpm
Engine Type
Diesel, 4-stroke, turbocharged
Fuel
Diesel
Fuel Injection
Direct high pressure common rail
Horsepower - Gross
74.00 hp (55.18 kw)
Horsepower -Net
68.00 hp (50.71 kw)
Net Power
68.00 hp (50.71 kw)
Net Torque
219.80 lbs ft (298.00 nm)
Number Of Cylinders
4
Power
74.00 hp (55.18 kw)
Power Measured @
2200 rpm
Stroke
4.40 in (11.18 cm)
Torque
233.10 lbs ft (316.04 nm)
Torque Measured @
1400 rpm
Hydraulic System
Case 588H Forklift Hydraulic System specifications
Pump Flow
24.10 gpm (91.22 lpm)
Pump Flow Capacity
24.00 gpm (90.84 lpm)
Pump Type
Gear pump
Mast
Case 588H Forklift Mast specifications
Lift Height- Largest Mast
264.18 in (671.02 cm)
Lift Height-Smallest Mast
179.93 in (457.02 cm)
Load Capacity
7,998.38 lbs (3,628.01 kg)
Load Center
24.02 in (61.01 cm)
Mast Tip Forward
45 degrees
Mast Tip Rear
15 degrees
Operational
Case 588H Forklift Operational specifications
Front Tire Size
19.5 L x 24
Operating Weight
15,507.40 lbs (7,034.05 kg)
Rear Tire Size
12 L x 16.5
×
Stay Ahead of the Market
Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.
