Hyster J70XN Forklift Specs

Category: Forklifts ➔
Manufacturer: Hyster ➔
Model: J70XN ➔

Brakes

Hyster J70XN Forklift Brakes specifications
Parking Brake	Mechanical
Service Brake	Hydraulic

Dimensions

Hyster J70XN Forklift Dimensions specifications
Front Tread Range	36.93 in (93.80 cm)
Gradeability	32 %
Ground Clearance	3.86 in (9.80 cm)
Height To Top Of Overhead Guard	7.20 ft (2.19 m)
Length To Fork Face	8.39 ft (2.56 m)
Overall Height - Mast Lowered	7.20 ft (2.19 m)
Overall Width	3.92 ft (1.19 m)
Rear Tread Range	39.06 in (99.21 cm)
Right Angle Stack	12.45 ft (3.79 m)
Turning Radius	7.02 ft (2.14 m)
Wheelbase	5.75 ft (1.75 m)

Engine

Hyster J70XN Forklift Engine specifications
Engine Make	Hyster
Engine Model	J70XN

Hydraulic

Hyster J70XN Forklift Hydraulic specifications
Relief Valve Pressure	2250 psi

Mast

Hyster J70XN Forklift Mast specifications
Lift Speed	116 ft/min
Load Capacity	6,999.68 lbs (3,175.01 kg)
Load Center	24.02 in (61.01 cm)
Lower Speed	91 ft/min
Mast Tip Forward	5 degrees
Mast Tip Rear	5 degrees

Operational

Hyster J70XN Forklift Operational specifications
Auxiliary Hydraulic Flow	10.60 gpm (40.12 lpm)
Axle Load - Front	6,177.40 lbs (2,802.02 kg)
Axle Load - Rear	6,744.00 lbs (3,059.03 kg)
Drawbar Pull	4,243.00 lbs (1,924.59 kg)
Front Tire Size	23 x 10 - 12
Max Speed	11.20 mph (18.02 kph)
Number Of Front Wheels	2
Number Of Rear Wheels	2
Operating Voltage	80 V
Operating Weight	8,000.60 lbs (3,629.02 kg)
Rear Tire Size	18 x 7 - 8
Tire Type	Pneumatic

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon