All Equipment Category Specs ↠ Forklifts ↠ Hyster S80FT-BCS

Hyster S80FT-BCS Forklift

Category: Forklifts (See all Forklifts for sale)
Manufacturer: Hyster (See all Hyster Equipment for sale)
Model: S80FT-BCS (See all Hyster S80FT-BCS for sale)

Dimensions

Gradeability	44%
Ground Clearance	5 in (11 cm)
Height to Top of Overhead Guard	7 ft (2 m)
Length to Fork Face	8 ft (2 m)
Overall Height - mast lowered	7 ft (2 m)
Overall Width	4 ft (1 m)
Turning Radius	7 ft (2 m)
Wheelbase	5 ft (2 m)

Engine

Displacement	230 cu in (3,769 cu cm)
Engine Make	Kubota
Engine Model	WG3800 LPG
Number of Cylinders	4
Power	74 hp (55 kw)
Power Measured @	1800 rpm
Torque	221 lbs ft (300 nm)
Torque Measured @	1000 rpm

MAST

Lift Speed	120 ft/min (37 m/min)
Load Capacity	8,001 lbs (3,629 kg)
Load Center	24 in (61 cm)
Lower Speed	93 ft/min (28 m/min)
Mast Tip Forward	5 degrees
Mast Tip Rear	6 degrees

Operating Specifications

Axle load - front	5,556 lbs (2,520 kg)
Axle load - rear	7,785 lbs (3,531 kg)
Drawbar Pull	7,119 lbs (3,229 kg)
Front Tire Size	22 X 9 x 16
Hydraulic System Relief Valve Pressure	2250 psi
Hydraulic Tank	21 gal (78 l)
Max Speed	11 mph (17 kph)
Number of Front Wheels	2X
Number of Rear Wheels	2
Operating Weight	13,340 lbs (6,051 kg)
Rear Tire Size	18 x 7 x 12.2
Tire Type	Cushion

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon