John Deere FA 20 Header Specs

Category: Headers / Platforms ➔
Manufacturer: John Deere ➔
Model: FA 20 ➔

Cutterbar

John Deere FA 20 Header Cutterbar specifications
Backshaft Speed	490.0 rpm - Starting 2026
Cutterbar Angle	10.0 degree (angle) - Starting 2026
Cutterbar Length	20.00 ft (6.10 m) - Starting 2026
Cutterbar Type	Knife system with in-line gearbox - Starting 2026
Flex Cutterbar Float Range	6.00 in (15.24 cm) - Starting 2026
Guards	Forged steel, heat-treated - Starting 2026
Knife Sections	Heavy-duty, over-serrated - Starting 2026
Knife Speed	490.0 cycles/min - Starting 2026
Tilt Adjustment	17.0 degree (angle) - Starting 2026
Type	4.00 in (10.16 cm) - Starting 2026

Dimensions

John Deere FA 20 Header Dimensions specifications
Approximate Weight	3,942.00 lbs (1,788.06 kg) - Starting 2026
Cutting Width	20.00 ft (6.10 m) - Starting 2026
Gathering Width	20.10 ft (6.13 m) - Starting 2026
Overall Width	21.70 ft (6.61 m) - Starting 2026

Hydraulics

John Deere FA 20 Header Hydraulics specifications
Reel Fore/Aft Stroke	14.10 in (35.81 cm) - Starting 2026

Key Specs

John Deere FA 20 Header Key Specs specifications
Cutterbar Length	20.00 ft (6.10 m) - Starting 2026
Cutting Width	20.00 ft (6.10 m) - Starting 2026
Flex Cutterbar Float Range	6.00 in (15.24 cm) - Starting 2026
Height Control	Hydraulic - Starting 2026
Overall Width	21.70 ft (6.61 m) - Starting 2026
Speed Control	Hydraulic - Starting 2026
Tilt Adjustment	17.0 degree (angle) - Starting 2026

Platform

John Deere FA 20 Header Platform specifications
Type	Auger - Starting 2026

Platform Auger

John Deere FA 20 Header Platform Auger specifications
Diameter	26.00 in (66.04 cm) - Starting 2026
Operating Speed - Maximum	170.0 rpm - Starting 2026
Operating Speed - Minimum	135.0 rpm - Starting 2026

Reel

John Deere FA 20 Header Reel specifications
Diameter	3.50 ft (1.07 m) - Starting 2026
Number Of Slats	6 - Starting 2026

Reel Controls

John Deere FA 20 Header Reel Controls specifications
Height Control	Hydraulic - Starting 2026
Operating Speeds - Maximum	44.0 rpm - Starting 2026
Operating Speeds - Minimum	6.0 rpm - Starting 2026
Speed Control	Hydraulic - Starting 2026

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon