John Deere RDF 30 Header Specs

Category: Headers / Platforms ➔
Manufacturer: John Deere ➔
Model: RDF 30 ➔

Additional Information

John Deere RDF 30 Header Additional Information specifications
Date Collected	2020-06-15 - Starting 2026

Cutterbar

John Deere RDF 30 Header Cutterbar specifications
Base Skid Shoe Height	1.50 in (3.81 cm) - Starting 2026
Cutterbar Length	30.00 ft (9.14 m) - Starting 2026
Cutterbar Type	Straight-line knife drive system. Cutterbar vertical flex: 7.5 in. (190 mm) - Starting 2026
Knife Drive	4.00 in (10.16 cm) - Starting 2026
Knife Speed	X Series Combine: 520 cycles/min; S-Series Combine: 490 cycles/min - Starting 2026

Dimensions

John Deere RDF 30 Header Dimensions specifications
Overall Operating Depth	9.00 ft (2.74 m) - Starting 2026
Overall Width	33.00 ft (10.06 m) - Starting 2026
Transport Width, Field Position	33.00 ft (10.06 m) - Starting 2026

Draper Belts

John Deere RDF 30 Header Draper Belts specifications
Belt Depth	39.80 in (101.09 cm) - Starting 2026
Center Belt Reverse	Base - Starting 2026
Cleat Height	0.75 in (1.90 cm) - Starting 2026
Draper Belt Width	40.00 in (101.60 cm) - Starting 2026
Operating Speed - Maximum	11.5 fps - Starting 2026
Operating Speed - Minimum	3.3 fps - Starting 2026
Speed Control	Hydraulic from cab (side belts only) - Starting 2026

Feed Drum

John Deere RDF 30 Header Feed Drum specifications
Auger Finger Platform	Triple chevron, retracting - Starting 2026
Center Cleanout Door	Base - Starting 2026
Diameter	16.30 in (41.40 cm) - Starting 2026
Drum/Auger Reverse	Base - Starting 2026
Feed Drum Fingers	0.63 in (1.59 cm) - Starting 2026
Finger Reach	6.00 in (15.24 cm) - Starting 2026
Number Of Fingers	21 - Starting 2026
Operating Speed, RPM - Maximum	240.0 rpm - Starting 2026
Operating Speed, RPM - Minimum	200.0 rpm - Starting 2026

Header Height Sensing

John Deere RDF 30 Header Header Height Sensing specifications
Header Height Sensing Off The Ground	Optional: three sensors - Starting 2026
Header Height Sensing On The Ground	Base - Starting 2026
Type	Electrohydraulic - Starting 2026

Key Specs

John Deere RDF 30 Header Key Specs specifications
Cutterbar Length	30.00 ft (9.14 m) - Starting 2026
Cutterbar Type	Straight-line knife drive system. Cutterbar vertical flex: 7.5 in. (190 mm) - Starting 2026
Draper Belt Width	40.00 in (101.60 cm) - Starting 2026
Knife Drive	Double-cut, dual-drive, shaft-driven cutterbar: 4 in. (10.2 cm) - Starting 2026
Knife Speed	X Series Combine: 520 cycles/min; S-Series Combine: 490 cycles/min - Starting 2026
Operating Speeds - Maximum	70.0 rpm - Starting 2026
Operating Speeds - Minimum	6.0 rpm - Starting 2026
Reel Diameter	42.00 in (106.68 cm) - Starting 2026
Speed Control	Hydraulic rpm - Starting 2026

Pickup Reel

John Deere RDF 30 Header Pickup Reel specifications
Fingers	Base: nylon; Optional: steel - Starting 2026
Height Control	Hydraulic - Starting 2026
Number Of Slats	6 - Starting 2026
Operating Speeds - Maximum	70.0 rpm - Starting 2026
Operating Speeds - Minimum	6.0 rpm - Starting 2026
Reel Diameter	42.00 in (106.68 cm) - Starting 2026
Reel Fore And Aft	14.10 in (35.81 cm) - Starting 2026
Reel Lift	28.30 in (71.88 cm) - Starting 2026
Reel Resume	Base - Starting 2026
Reel Reverse	Base - Starting 2026
Speed Control	Hydraulic rpm - Starting 2026

Platform

John Deere RDF 30 Header Platform specifications
Type	Rigid frame flexible cutterbar - Starting 2026

Top Auger

John Deere RDF 30 Header Top Auger specifications
Size	18.00 in (45.72 cm) - Starting 2026
Type	Optional: hydraulic drive - Starting 2026

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon