Caterpillar MH3027 Material Handler Specs

Category: Material Handlers ➔
Manufacturer: Caterpillar ➔
Model: MH3027 ➔

Dimensions (Approximate) - Cab To Ground

Caterpillar MH3027 Material Handler Dimensions (Approximate) - Cab To Ground specifications
Cab Clearance - Lowered To Ground*	6.10 in (15.49 cm)
Cab Linkage Height - Raised To Top Of Fogs Guard	N/A
Cab Linkage Height - Transportation	10.17 ft (3.10 m)
Cab Step Height - Lowered To Ground**	9.60 in (24.38 cm)
Counterweight Clearance	4.72 ft (1.44 m)
Note (1)	*Factory set at 155 mm (6.1") adjustable through the operating system to be lower or higher.
Outrigger Width On Ground	15.40 ft (4.69 m)
Shipping Height	10.41 ft (3.17 m)
Shipping Length	37.00 ft (11.28 m)
Shipping Width - Outriggers Up	10.10 ft (3.08 m)
Tail Swing Radius	9.64 ft (2.94 m)
Undercarriage Length	18.81 ft (5.73 m)
Undercarriage Width	9.68 ft (2.95 m)
Wheel Base	9.17 ft (2.80 m)

Dimensions (Approximate) - Cab To Platform

Caterpillar MH3027 Material Handler Dimensions (Approximate) - Cab To Platform specifications
Cab Clearance - Lowered To Ground*	N/A
Cab Linkage Height - Raised To Top Of Fogs Guard	82.50 in (209.55 cm)
Cab Linkage Height - Transportation	11.12 ft (3.39 m)
Cab Step Height - Lowered To Ground**	N/A
Counterweight Clearance	4.72 ft (1.44 m)
Note (1)	*Factory set at 155 mm (6.1") adjustable through the operating system to be lower or higher.
Note (2)	**Factory set at 243 mm (9.6") dimension varies as the cab clearance adjustment changed.
Outrigger Width On Ground	15.40 ft (4.69 m)
Shipping Height	11.77 ft (3.59 m)
Shipping Length	37.00 ft (11.28 m)
Shipping Width - Outriggers Up	10.10 ft (3.08 m)
Tail Swing Radius	9.64 ft (2.94 m)
Undercarriage Length	18.81 ft (5.73 m)
Undercarriage Width	9.68 ft (2.95 m)
Wheel Base	9.17 ft (2.80 m)

Engine

Caterpillar MH3027 Material Handler Engine specifications
Bore	4.10 in (10.41 cm)
Cylinders	6 in-line
Displacement	428.00 cu in (7,013.68 cu cm)
Emissions	U.S. EPA Tier 4 Final/EU Stage IV
Engine Model	Cat C7.1 ACERT
Maximum Torque - 1,400 Rpm	621.00 lbs ft (841.95 nm)
Net Power (Iso 14396) - Metric	129 kW (175.4 hp [PS])
Net Power - Iso 14396	173.00 hp (129.01 kw)
Stroke	5.30 in (13.46 cm)

Hydraulic System

Caterpillar MH3027 Material Handler Hydraulic System specifications
Controls	Electro/hydraulic pilot controls
System Capacity	125.00 gal (473.13 l)
Tank Capacity	43.00 gal (162.76 l)

Hydraulic System - Maximum Flow

Caterpillar MH3027 Material Handler Hydraulic System - Maximum Flow specifications
Fan Circuit	8.70 gpm (32.93 lpm)
Implement Circuit	96.00 gpm (363.36 lpm)
Operating Temperature	60-73 degrees C (140-164 degrees F)
Swing Circuit	33.70 gpm (127.55 lpm)

Hydraulic System - Maximum Pressure

Caterpillar MH3027 Material Handler Hydraulic System - Maximum Pressure specifications
Auxiliary Circuit - High Pressure - Factory Setting	4750 psi
Auxiliary Circuit - High Pressure - Maximum Allowable Relief Setting	4750 psi
Auxiliary Circuit - Medium Pressure - Factory Setting	2450 psi
Auxiliary Circuit - Medium Pressure - Maximum Allowable Relief Setting	2500 psi
Fan Circuit	3104 psi
Implement Circuit	4750 psi
Swing Circuit	5510 psi
Travel Circuit	4750 psi

Service Refill Capabilities

Caterpillar MH3027 Material Handler Service Refill Capabilities specifications
Cooling System	10.30 gal (38.99 l)
Diesel Exhaust Fluid Tank	6.00 gal (22.71 l)
Engine Crankcase - With Filter	4.90 gal (18.55 l)
Fuel Tank	110.00 gal (416.35 l)
Hydraulic System - Including Tank	168.00 gal (635.88 l)
Hydraulic Tank	43.00 gal (162.76 l)
Rear Axle	5.00 gal (18.93 l)
Steering Axle	3.60 gal (13.63 l)

Stabilizers

Caterpillar MH3027 Material Handler Stabilizers specifications
Ground Penetration	3.50 in (8.89 cm)

Swing Mechanism

Caterpillar MH3027 Material Handler Swing Mechanism specifications
Maximum Swing Pump Flow	36.00 gpm (136.26 lpm)
Swing Speed	7.9 rpm
Swing System	Closed loop hydrostatic system with electro-proportional controls
Swing Torque	55,000.00 lbs ft (74,569.00 nm)

Transmission

Caterpillar MH3027 Material Handler Transmission specifications
Creeper Speed	3.10 mph (4.99 kph)
Maximum Gradeability	35% or 19 degrees
Maximum Travel Speed	12.40 mph (19.96 kph)

Undercarriage

Caterpillar MH3027 Material Handler Undercarriage specifications
Ground Clearance - Lowest Point	8.70 in (22.10 cm)
Minimum Turning Radius - Inside	16.50 ft (5.03 m)
Oscillation Axle Angle	3 degrees

Weights

Caterpillar MH3027 Material Handler Weights specifications
Boom - Long	5,556.00 lbs (2,520.16 kg)
Boom - Short	4,960.00 lbs (2,249.82 kg)
Counterweight	7,670.00 lbs (3,479.06 kg)
Operating Weight	29 651 kg (65,370 lb)
Operating Weight - Without Attachment	65,370.00 lbs (29,651.37 kg)
Stick	2,690.00 lbs (1,220.16 kg)

Working Ranges - Drop Nose Stick

Caterpillar MH3027 Material Handler Working Ranges - Drop Nose Stick specifications
Maximum Depth	13.00 ft (3.96 m)
Maximum Height	49.90 ft (15.21 m)
Maximum Reach	44.70 ft (13.62 m)

Working Ranges - Straight Stick

Caterpillar MH3027 Material Handler Working Ranges - Straight Stick specifications
Maximum Depth	10.00 ft (3.05 m)
Maximum Height	44.70 ft (13.62 m)
Maximum Reach	39.00 ft (11.89 m)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon