Caterpillar MH3037 Material Handler Specs

Category: Material Handlers ➔
Manufacturer: Caterpillar ➔
Model: MH3037 ➔

Dimensions

Caterpillar MH3037 Material Handler Dimensions specifications
Cab Clearance - Lowered To Ground*	9.50 in (24.13 cm)
Cab Height - Raised To Top Of Fogs Guard	19.30 ft (5.88 m)
Cab Height - Transportation	10.87 ft (3.31 m)
Counterweight Clearance	5.18 ft (1.58 m)
Height	10.92 ft (3.33 m)
Length	41.17 ft (12.55 m)
Note	*Factory set at 242 mm (9.5") - adjustable through the operating system to be lower or higher.
Shipping Height	10.94 ft (3.33 m)
Shipping Length	41.34 ft (12.60 m)
Shipping Width	10.52 ft (3.21 m)
Stabilizer Width On Ground	16.52 ft (5.04 m)
Tail Swing Radius	10.32 ft (3.15 m)
Undercarriage Length	21.36 ft (6.51 m)
Undercarriage Width	9.83 ft (3.00 m)
Weight	82,900.00 lbs (37,602.85 kg)
Wheel Base	9.84 ft (3.00 m)
Width	10.50 ft (3.20 m)

Engine

Caterpillar MH3037 Material Handler Engine specifications
Bore	4.40 in (11.18 cm)
Cylinders	6 in-line
Displacement	442.00 cu in (7,243.10 cu cm)
Emissions	Tier 3/EU Stage IIIA
Engine Model	Cat C7 ACERT
Fuel Capacity	110.00 gal (416.35 l)
Maximum Torque - 1,400 Rpm	758.20 lbs ft (1,027.97 nm)
Net Power - Iso 9249	225.00 hp (167.79 kw)
Stroke	5.00 in (12.70 cm)

Hydraulic System

Caterpillar MH3037 Material Handler Hydraulic System specifications
Controls	Electro/hydraulic pilot controls
System Capacity	160.00 gal (605.60 l)
Tank Capacity	100.00 gal (378.50 l)

Hydraulic System - Maximum Flow

Caterpillar MH3037 Material Handler Hydraulic System - Maximum Flow specifications
Auxiliary Circuit - High Pressure	55.00 gpm (208.18 lpm)
Auxiliary Circuit - Medium Pressure	20.00 gpm (75.70 lpm)
Implement Circuit	137.00 gpm (518.55 lpm)
Operating Temperature	60-73 degrees C (140-164 degrees F)

Hydraulic System - Maximum Pressure

Caterpillar MH3037 Material Handler Hydraulic System - Maximum Pressure specifications
Auxiliary Circuit - Medium Pressure - Factory Setting	2200 psi
Auxiliary Circuit - Medium Pressure - Maximum Allowable Relief Setting	2500 psi
Implement Circuit	4600 psi
Swing Circuit	5500 psi
Travel Circuit	4800 psi

Outriggers

Caterpillar MH3037 Material Handler Outriggers specifications
Ground Penetration	5.50 in (13.97 cm)

Service Refill Capabilities

Caterpillar MH3037 Material Handler Service Refill Capabilities specifications
Cooling System	9.50 gal (35.96 l)
Engine Crankcase - With Filter	7.40 gal (28.01 l)
Final Drive - Each	1.60 gal (6.06 l)
Fuel Tank	110.00 gal (416.35 l)
Hydraulic System - Including Tank	160.00 gal (605.60 l)
Hydraulic Tank	100.00 gal (378.50 l)

Swing Mechanism

Caterpillar MH3037 Material Handler Swing Mechanism specifications
Maximum Swing Pump Flow	37.00 gpm (140.05 lpm)
Swing Speed	8.2 rpm
Swing System	Closed loop hydrostatic system with electro-proportional controls
Swing Torque	62,000.00 lbs ft (84,059.60 nm)

Transmission

Caterpillar MH3037 Material Handler Transmission specifications
Creeper Speed	3.30 mph (5.31 kph)
Maximum Gradeability	35%
Maximum Travel Speed	12.40 mph (19.96 kph)

Undercarriage

Caterpillar MH3037 Material Handler Undercarriage specifications
Ground Clearance - Lowest Point	11.70 in (29.72 cm)
Minimum Turning Radius - Inside	21.00 ft (6.40 m)
Oscillation Axle Angle	2.5 degrees

Weights

Caterpillar MH3037 Material Handler Weights specifications
Boom	8,080.00 lbs (3,665.03 kg)
Counterweight	14,200.00 lbs (6,441.02 kg)
Operating Weight	37 600 kg (82,900 lb)
Stick - Long	5,464.00 lbs (2,478.43 kg)
Stick - Short	4,956.00 lbs (2,248.01 kg)

Working Ranges

Caterpillar MH3037 Material Handler Working Ranges specifications
Long Boom/Long Stick - Maximum Depth	16.00 ft (4.88 m)
Long Boom/Long Stick - Maximum Height	58.00 ft (17.68 m)
Long Boom/Long Stick - Maximum Reach	52.00 ft (15.85 m)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon