The Case 845B DHP Motor Grader offers powerful performance and precise control for a variety of grading and leveling tasks. With a turbocharged engine delivering 160 horsepower and 560 lb-ft of torque, this grader ensures efficient operation on any job site. Its 12-foot moldboard provides a maximum depth of cut of 28 inches, while the 360-degree circle rotation and 25-degree articulation angle allow for superior maneuverability. With a comfortable Isomount cab and advanced hydraulic system, the Case 845B DHP is a reliable and versatile machine for all grading needs.
Circle
Case 845B DHP Motor Grader Circle specifications
Diameter
69.00 in (175.26 cm)
Max Lift Above Ground
17.50 in (44.45 cm)
Rotation
360 degrees
Dimensions
Case 845B DHP Motor Grader Dimensions specifications
Blade Base
8.41 ft (2.56 m)
Front Ground Clearance
2.05 ft (0.62 m)
Height To Top Of Isomount Cab
10.96 ft (3.34 m)
Overall Length
28.00 ft (8.53 m)
Rear Ground Clearance
1.25 ft (0.38 m)
Tandem Axle Wheelbase
5.16 ft (1.57 m)
Wheelbase
20.41 ft (6.22 m)
Width Over Tires
8.20 ft (2.50 m)
Engine
Case 845B DHP Motor Grader Engine specifications
Aspiration
Turbocharged with air to air aftercooler
Displacement
409.00 cu in (6,702.32 cu cm)
Engine Make
2239
Engine Model
FPT 6.7L
Net Power Gears 7-8
160.00 hp (119.31 kw)
Net Torque Gears 7-8
560.00 lbs ft (759.25 nm)
Number Of Cylinders
6
Power Measured @
2200 rpm
Torque Measured @
1500 rpm
Front Axle
Case 845B DHP Motor Grader Front Axle specifications
Oscillation - Total
15.3 degrees
Wheel Lean
20 degrees
Hydraulic System
Case 845B DHP Motor Grader Hydraulic System specifications
Pump Flow
49.00 gpm (185.47 lpm)
Pump Type
load sensing piston
Moldboard
Case 845B DHP Motor Grader Moldboard specifications
Blade Down Pressure
16,854.00 lbs (7,643.54 kg)
Max Depth Of Cut
28.00 in (71.12 cm)
Moldboard Height
22.00 in (55.88 cm)
Moldboard Thickness
0.90 in (2.29 cm)
Moldboard Width
12.00 ft (3.66 m)
Side Shift Left
21.00 in (53.34 cm)
Side Shift Right
27.00 in (68.58 cm)
Operational
Case 845B DHP Motor Grader Operational specifications
Alternator Supplied Amperage
90 amps
Circle Gearbox Fluid Capacity
0.80 gal (3.03 l)
Cooling System Fluid Capacity
10.50 gal (39.74 l)
Fuel Capacity
90.00 gal (340.65 l)
Hydraulic System Fluid Capacity
47.50 gal (179.79 l)
Oil System Fluid Capacity
18.50 gal (70.02 l)
Operating Voltage
24 V
Rear Diff/Final Drive Fluid Capacity
10.50 gal (39.74 l)
Std Operation Weight - Front Axle
9,912.00 lbs (4,495.24 kg)
Std Operation Weight - Rear Axle
22,287.00 lbs (10,107.48 kg)
Std Operation Weight - Total
32,199.00 lbs (14,602.72 kg)
Tandem Case Fluid Capacity (Each)
15.90 gal (60.18 l)
Tire Size
14.0 x 24-10 PR
Transmission Fluid Capacity
21.00 gal (79.49 l)
Steering
Case 845B DHP Motor Grader Steering specifications
Articulation Angle
25 degrees
Turning Radius
23.80 ft (7.25 m)
Transmission
Case 845B DHP Motor Grader Transmission specifications
Max Speed - Forward
26.60 mph (42.81 kph)
Max Speed - Reverse
17.70 mph (28.49 kph)
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Transmission Type
direct drive powershift
×
Stay Ahead of the Market
Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.
