Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Blade Tip Angle - Front | 40 deg |
Blade Tip Angle - Rear | 5 deg |
Diameter | 60.3 in |
Max Lift Above Ground | 18 in |
Max Reach Outside Tires - Left | 72.5 in |
Max Reach Outside Tires - Right | 75.3 in |
Rotation | 360 deg |
Shift Left | 24.7 in |
Shift Right | 24.8 in |
Blade Base | 8.6 ft |
Front Ground Clearance | 2 ft |
Height to Top of Isomount Cab | 10.3 ft |
Overall Length | 27.1 ft |
Tandem Axle Wheelbase | 5 ft |
Wheelbase | 19.3 ft |
Width Over Tires | 8.1 ft |
Aspiration | turbocharged |
Displacement | 402.8 cu in |
Engine Model | 3116 DITA |
Max Power | 140 hp (104 kw) |
Net Power Gear 1-2 | 125 hp (93 kw) |
Net Power Gear 4-6 | 125 hp (93 kw) |
Net Power Gears 7-8 | 140 hp (104 kw) |
Number of Cylinders | 6 |
Power Measured @ | 2000 rpm |
Torque Measured @ | 1400 rpm |
Ground Clearance | 2 ft |
Oscillation - Total | 32 deg |
Wheel Lean | 18 deg |
Pump Flow | 39.1 gpm |
Pump Type | Axial Piston |
Relief Valve Pressure | 3500 psi |
Blade Down Pressure | 20062.1 lbs |
Blade Pull at Max Weight | 23503.5 lbs |
Max Depth of Cut | 30.6 in |
Moldboard Height | 24.1 in |
Moldboard Thickness | 0.9 in |
Moldboard Width | 12.1 ft |
Side Shift Left | 20.7 in |
Side Shift Right | 26 in |
Alternator Supplied Amperage | 50 amps |
Circle Gearbox Fluid Capacity | 1.9 gal |
Cooling System Fluid Capacity | 10.6 gal |
Hydraulic System Fluid Capacity | 18 gal |
Oil System Fluid Capacity | 6.1 gal |
Operating Voltage | 24 volts |
Rear Diff/Final Drive Fluid Capacity | 12.5 gal |
Std Operation Weight - Front Axle | 7880 lbs |
Std Operation Weight - Rear Axle | 19720 lbs |
Tandem Case Fluid Capacity (each) | 13 gal |
Articulation Angle | 20 deg |
Turning Radius | 23.7 ft |
Max Speed - Forward | 26.5 mph (42 kph) |
Max Speed - Reverse | 21 mph (34 kph) |
Number of Gears - Forward | 8 |
Number of Gears - Reverse | 6 |
Transmission Type | direct drive, powershift |