Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
The Caterpillar 12G is a motor grader designed for road construction, maintenance, and site preparation. Built by Caterpillar, the 12G features a moldboard for grading, leveling, and shaping surfaces, along with a front axle and articulated frame for maneuverability. It is commonly used in highway work, mining support, and municipal grading applications. The machine is known for its mechanical drivetrain, operator cab, and hydraulic blade control systems typical of its era. As a Caterpillar motor grader, the 12G remains a recognized model in used equipment, parts, and equipment reference searches for grading and earthmoving applications.
| Blade Tip Angle - Front | 90 degrees |
| Blade Tip Angle - Rear | 90 degrees |
| Diameter | 60.30 in (153.16 cm) |
| Max Lift Above Ground | 17.30 in (43.94 cm) |
| Max Reach Outside Tires - Left | 72.10 in (183.13 cm) |
| Max Reach Outside Tires - Right | 73.70 in (187.20 cm) |
| Rotation | 360 degrees |
| Blade Base | 8.50 ft (2.59 m) |
| Height to Top of Isomount Cab | 11.00 ft (3.35 m) |
| Overall Length | 27.30 ft (8.32 m) |
| Tandem Axle Wheelbase | 5.00 ft (1.52 m) |
| Wheelbase | 19.50 ft (5.94 m) |
| Width Over Tires | 8.00 ft (2.44 m) |
| Displacement | 640.80 cu in (10,500.85 cu cm) |
| Max Power | 135.00 hp (100.67 kw) |
| Net Power Gear 5-6 | 135.00 hp (100.67 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2200 rpm |
| Ground Clearance | 2.10 ft (0.64 m) |
| Oscillation - Total | 32 degrees |
| Wheel Lean | 18 degrees |
| Pump Flow | 51.00 gpm (193.04 lpm) |
| Pump Type | closed-center constant-pressure system w/ variable displacement piston |
| Relief Valve Pressure | 2150 psi |
| Max Depth of Cut | 17.80 in (45.21 cm) |
| Moldboard Height | 24.10 in (61.21 cm) |
| Moldboard Thickness | 0.90 in (2.29 cm) |
| Moldboard Width | 12.00 ft (3.66 m) |
| Side Shift Left | 26.40 in (67.06 cm) |
| Side Shift Right | 20.50 in (52.07 cm) |
| Alternator Supplied Amperage | 19 amps |
| Cooling System Fluid Capacity | 12.50 gal (47.31 l) |
| Fuel Capacity | 74.80 gal (283.12 l) |
| Hydraulic System Fluid Capacity | 20.10 gal (76.08 l) |
| Max Operation Weight - Front Axle | 9,987.00 lbs (4,530.03 kg) |
| Max Operation Weight - Rear Axle | 21,605.40 lbs (9,800.06 kg) |
| Max Operation Weight - Total | 31,592.30 lbs (14,330.04 kg) |
| Oil System Fluid Capacity | 7.70 gal (29.14 l) |
| Operating Voltage | 24 volts |
| Std Operation Weight - Front Axle | 7,870.60 lbs (3,570.05 kg) |
| Std Operation Weight - Rear Axle | 20,128.30 lbs (9,130.05 kg) |
| Std Operation Weight - Total | 27,998.80 lbs (12,700.06 kg) |
| Tandem Case Fluid Capacity (each) | 17.00 gal (64.35 l) |
| Transmission Fluid Capacity | 23.00 gal (87.06 l) |
| Articulation Angle | 50 degrees |
| Turning Radius | 24.00 ft (7.32 m) |
| Max Speed - Forward | 25.50 mph (41.04 kph) |
| Max Speed - Reverse | 25.50 mph (41.04 kph) |
| Number of Gears - Forward | 6 |
| Number of Gears - Reverse | 6 |
| Transmission Type | Cat-built direct drive power shift |