Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Blade Tip Range - Backward | 5 degrees |
Blade Tip Range - Forward | 40 degrees |
Circle Centershift - Left | 25.5 in (65 cm) |
Circle Centershift - Right | 23.5 in (60 cm) |
Maximum Blade Position Angle | 65 degrees |
Maximum Depth of Cut | 19.2 in (49 cm) |
Maximum Lift Above Ground | 15.6 in (40 cm) |
Maximum Shoulder Reach Outside of Tires - Left | 90 in (229 cm) |
Maximum Shoulder Reach Outside of Tires - Right | 101.9 in (259 cm) |
Moldboard Sideshift - Left | 25.6 in (65 cm) |
Moldboard Sideshift - Right | 43.1 in (109 cm) |
Blade Tip Angle - Front | 40 degrees |
Blade Tip Angle - Rear | 5 degrees |
Diameter | 71.8 in (182 cm) |
Max Lift Above Ground | 15.6 in (40 cm) |
Max Reach Outside Tires - Left | 90 in (229 cm) |
Max Reach Outside Tires - Right | 101.9 in (259 cm) |
Shift Left | 25.5 in (65 cm) |
Shift Right | 23.5 in (60 cm) |
Blade Base | 10.1 ft (3 m) |
Front Ground Clearance | 2.3 ft (1 m) |
Ground Clearance - Rear Axle | 16 in (41 cm) |
Height - Exhaust Stack | 134.1 in (341 cm) |
Height - Front Axle Center | 27.1 in (69 cm) |
Height - Top of Cab | 12.2 ft (4 m) |
Height - Top of Cylinders | 121.6 in (309 cm) |
Height to Top of Isomount Cab | 12.2 ft (4 m) |
Length - Between Tandem Axles | 72.5 in (184 cm) |
Length - Counterweight to Ripper | 459.5 in (1,167 cm) |
Length - Front Axle to Mid Tandem | 275 in (699 cm) |
Length - Front Axle to Moldboard | 120.8 in (307 cm) |
Length - Front Tire to Rear of Machine | 392.2 in (996 cm) |
Overall Length | 32.7 ft (10 m) |
Rear Ground Clearance | 1.4 ft (0 m) |
Tandem Axle Wheelbase | 6.1 ft (2 m) |
Wheelbase | 23 ft (7 m) |
Width - Outside Front Tires | 121.9 in (310 cm) |
Width - Outside Rear Tires | 121.9 in (310 cm) |
Width - Tire Center Lines | 98.8 in (251 cm) |
Width Over Tires | 10.2 ft (3 m) |
Base Power (1st Gear) - Net | 297 hp (221 kw) |
Base Power (All Gears) - Net | 297 hp (221 kw) |
Bore | 5.1 in (13 cm) |
Derating Altitude | 15000 ft (4,572 m) |
Displacement | 763 cu in (0 cu m) |
Engine Model | Cat C13 ACERT VHP |
High - Ambient Capability | 122 degrees |
Max Power | 312 hp (233 kw) |
Maximum Torque | 1261 lbs ft |
Net Power Gear 1-2 | 302 hp (225 kw) |
Net Power Gear 4-6 | 312 hp (233 kw) |
Net Power Gear 5-6 | 312 hp (233 kw) |
Net Power Gears 7-8 | 312 hp (233 kw) |
Net Torque Gears 7-8 | 1261.3 lbs ft |
Number of Cylinders | 6 |
Power Measured @ | 2000 rpm |
Standard - Ambient Capability | 109 degrees |
Stroke | 6.2 in (16 cm) |
Circle - Blade Beam Thickness | 2 in (5 cm) |
Circle - Diameter | 71.8 in (182 cm) |
Drawbar - Height | 8 in (20 cm) |
Front Axle - Height to Center | 27.1 in (69 cm) |
Front Axle - Total Oscillation per Side | 32 degrees |
Front Axle - Wheel Lean - Left/Right | 18.2 degrees |
Ground Clearance | 2.3 ft (1 m) |
Oscillation - Total | 32 degrees |
Wheel Lean | 18.2 degrees |
Circuit Type | Electro-hydraulic load sensing, closed center |
Maximum System Pressure | 3500 psi |
Pump Flow | 74 gpm (280 lpm) |
Pump Output | 74 gpm (280 lpm) |
Pump Type | Variable piston |
Relief Valve Pressure | 3500 psi |
Reservoir Tank Capacity | 17.2 gal (65 l) |
Standby Pressure | 450 psi |
Arc Radius | 16.3 in (41 cm) |
Blade Down Pressure | 42957.1 lbs (19,485 kg) |
Blade Down Pressure - Base GVW | 29154 lbs (13,224 kg) |
Blade Down Pressure - Maximum GVW | 44047 lbs (19,980 kg) |
Blade Pull - Maximum GVW | 48554 lbs (22,024 kg) |
Blade Pull at Max Weight | 49156 lbs (22,297 kg) |
Blade Width | 16 ft (5 m) |
Cutting Edge Thickness | 1 in (3 cm) |
Cutting Edge Width | 8 in (20 cm) |
End Bit - Thickness | 0.8 in (2 cm) |
End Bit - Width | 6 in (15 cm) |
Max Depth of Cut | 19.2 in (49 cm) |
Moldboard - Height | 31 in (79 cm) |
Moldboard - Thickness | 1 in (3 cm) |
Moldboard Height | 31 in (79 cm) |
Moldboard Length | 16 ft (5 m) |
Moldboard Thickness | 1 in (3 cm) |
Moldboard Width | 16 ft (5 m) |
Side Shift Left | 25.6 in (65 cm) |
Side Shift Right | 43.1 in (109 cm) |
Throat Clearance | 4.9 in (12 cm) |
Articulation Angle - Left/Right | 20 degrees |
Circle Gearbox Fluid Capacity | 2.1 gal (8 l) |
Cooling System Fluid Capacity | 12.3 gal (47 l) |
Forward - 1st | 2.8 mph (5 kph) |
Forward - 2nd | 3.9 mph (6 kph) |
Forward - 3rd | 5.6 mph (9 kph) |
Forward - 4th | 7.7 mph (12 kph) |
Forward - 5th | 12 mph (19 kph) |
Forward - 6th | 16.7 mph (27 kph) |
Forward - 7th | 23 mph (37 kph) |
Forward - 8th | 33.5 mph (54 kph) |
Fuel Capacity | 135 gal (511 l) |
Hydraulic System Fluid Capacity | 30.1 gal (114 l) |
Max Operation Weight - Front Axle | 24073 lbs (10,919 kg) |
Max Operation Weight - Rear Axle | 54570 lbs (24,753 kg) |
Max Operation Weight - Total | 78643 lbs (35,672 kg) |
Operating Weight | 57452 lbs (26,060 kg) |
Rear Diff/Final Drive Fluid Capacity | 30.1 gal (114 l) |
Reverse - 1st | 2.2 |
Reverse - 2nd | 4.2 mph (7 kph) |
Reverse - 3rd | 6.1 mph (10 kph) |
Reverse - 4th | 9.5 mph (15 kph) |
Reverse - 5th | 18.2 mph (29 kph) |
Reverse - 6th | 26.5 mph (43 kph) |
Std Operation Weight - Front Axle | 15679 lbs (7,112 kg) |
Std Operation Weight - Rear Axle | 41773 lbs (18,948 kg) |
Std Operation Weight - Total | 57452 lbs (26,060 kg) |
Steering Range - Left/Right | 47.5 degrees |
Tandem Case Fluid Capacity (each) | 32.1 gal (121 l) |
Tire Size | 18.00-25 12PR (G-2) |
Top Speed - Forward | 33.5 mph (54 kph) |
Top Speed - Reverse | 26.5 mph (43 kph) |
Turning Radius - Outside Front Tires | 29.2 ft (9 m) |
Brakes - Parking | Spring applied, hydraulically released |
Brakes - Secondary | Oil-actuated, oil-disc |
Brakes - Service | Oil-actuated, oil-disc |
Brakes - Service - Surface Area | 7724 cu in (0 cu m) |
Forward/Reverse Gears | 8 Fwd/6 Rev |
Transmission | Direct drive, power shift, countershaft |
Machine Length Increase, Beam Raised | 63.4 in (161 cm) |
Penetration Force | 22140 lbs (10,043 kg) |
Pry-Out Force | 33788 lbs (15,326 kg) |
Ripper Shank Holders | 7 |
Ripping Depth - Maximum | 17.8 in (45 cm) |
Shank Holder Spacing - Maximum | 20 in (51 cm) |
Shank Holder Spacing - Minimum | 17.5 in (44 cm) |
Circle Drive Housing | 2.1 gal (8 l) |
Cooling System | 12.3 gal (47 l) |
Engine Oil | 7.9 gal (30 l) |
Front Wheel Spindle Bearing Housing | 0.3 gal (1 l) |
Fuel Capacity | 130 gal (492 l) |
Hydraulic System - Tank | 17.2 gal (65 l) |
Hydraulic System - Total | 30.1 gal (114 l) |
Tandem Housing - Each | 32.1 gal (121 l) |
Transmission - Differential - Final Drives | 30.1 gal (114 l) |
Articulation Angle | 20 degrees |
Turning Radius | 29.2 ft (9 m) |
Drive Chain Pitch | 2.5 in (6 cm) |
Height | 25.5 in (65 cm) |
Sidewall Thickness - Inner | 0.9 in (2 cm) |
Sidewall Thickness - Outer | 0.9 in (2 cm) |
Tandem Oscillation - Front Down | 25 degrees |
Tandem Oscillation - Front Up | 15 degrees |
Wheel Axle Spacing | 72.5 in (184 cm) |
Width | 9.3 in (24 cm) |
Max Speed - Forward | 33.5 mph (54 kph) |
Max Speed - Reverse | 26.5 mph (43 kph) |
Number of Gears - Forward | 8 |
Number of Gears - Reverse | 6 |
Transmission Type | direct drive, power shift, countershaft |
Gross Vehicle Weight - Base - Front Axle | 16345 lbs (7,414 kg) |
Gross Vehicle Weight - Base - Rear Axle | 43090 lbs (19,545 kg) |
Gross Vehicle Weight - Base - Total | 59435 lbs (26,960 kg) |
Gross Vehicle Weight - Maximum - Front Axle | 24694 lbs (11,201 kg) |
Gross Vehicle Weight - Maximum - Rear Axle | 53949 lbs (24,471 kg) |
Gross Vehicle Weight - Maximum - Total | 78643 lbs (35,672 kg) |