Categories ↠ Motor Graders ↠ Caterpillar 24M

Caterpillar 24M Motor Grader

Category: Motor Graders ➔
Manufacturer: Caterpillar ➔
Model: 24M ➔

Introducing the Caterpillar 24M Motor Grader, a powerhouse of efficiency and precision for all your grading needs. With its robust build and advanced features, the 24M is designed to deliver optimal performance on any job site. From its powerful engine producing 533 horsepower to its innovative hydraulic system with a maximum pressure of 3500 psi, this motor grader offers unmatched power and control. The 24M boasts a wide range of capabilities, from a maximum blade position angle of 35 degrees to a maximum lift above ground of 25 inches, ensuring precision and versatility in every operation. Get ready to tackle tough terrain with ease and precision using the Caterpillar 24M Motor Grader.

See all Caterpillar 24Ms for sale

Blades

Blade Tip Range - Backward	0 degrees
Blade Tip Range - Forward	40 degrees
Circle Centershift - Left	209.90 in (533.15 cm)
Circle Centershift - Right	210.20 in (533.91 cm)
Maximum Blade Position Angle	35 degrees
Maximum Depth of Cut	25.90 in (65.79 cm)
Maximum Lift Above Ground	25.00 in (63.50 cm)
Maximum Shoulder Reach Outside of Tires - Left	126.90 in (322.33 cm)
Maximum Shoulder Reach Outside of Tires - Right	127.10 in (322.83 cm)
Moldboard Sideshift - Left	178.30 in (452.88 cm)
Moldboard Sideshift - Right	193.00 in (490.22 cm)

Circle

Blade Tip Angle - Front	40 degrees
Diameter	103.60 in (263.14 cm)
Max Lift Above Ground	25.00 in (63.50 cm)
Max Reach Outside Tires - Left	126.90 in (322.33 cm)
Max Reach Outside Tires - Right	127.70 in (324.36 cm)
Shift Left	31.70 in (80.52 cm)
Shift Right	17.20 in (43.69 cm)

Dimensions

Blade Base	13.30 ft (4.05 m)
Front Ground Clearance	2.90 ft (0.88 m)
Ground Clearance - Rear Axle	23.90 in (60.71 cm)
Height - Exhaust Stack	170.20 in (432.31 cm)
Height - Front Axle Center	33.80 in (85.85 cm)
Height - Top of Cab	14.70 ft (4.48 m)
Height - Top of Cylinders	151.40 in (384.56 cm)
Height to Top of Isomount Cab	14.30 ft (4.36 m)
Length - Between Tandem Axles	90.00 in (228.60 cm)
Length - Counterweight to Ripper	633.90 in (1,610.11 cm)
Length - Front Axle to Mid Tandem	404.60 in (1,027.68 cm)
Length - Front Axle to Moldboard	159.40 in (404.88 cm)
Length - Front Tire to Rear of Machine	558.80 in (1,419.35 cm)
Overall Length	46.60 ft (14.20 m)
Rear Ground Clearance	1.70 ft (0.52 m)
Tandem Axle Wheelbase	7.50 ft (2.29 m)
Wheelbase	33.80 ft (10.30 m)
Width - Outside Front Tires	168.50 in (427.99 cm)
Width - Outside Rear Tires	166.30 in (422.40 cm)
Width - Tire Center Lines	135.80 in (344.93 cm)
Width Over Tires	14.10 ft (4.30 m)

Engine

Base Power (1st Gear) - Net	533.00 hp (397.46 kw)
Base Power (All Gears) - Net	533.00 hp (397.46 kw)
Bore	5.70 in (14.48 cm)
Derating Altitude	5,500.00 ft (1,676.40 m)
Displacement	1,104.50 cu in (18,099.55 cu cm)
Engine Model	Cat C18 ACERT
Max Power	533.00 hp (397.46 kw)
Maximum Torque	1,762.00 lbs ft (2,388.92 nm)
Net Power Gear 1-2	533.00 hp (397.46 kw)
Net Power Gear 4-6	533.00 hp (397.46 kw)
Net Power Gear 5-6	533.00 hp (397.46 kw)
Net Power Gears 7-8	533.00 hp (397.46 kw)
Net Torque Gears 7-8	1,762.00 lbs ft (2,388.92 nm)
Number of Cylinders	6
Power Measured @	2000 rpm
Standard - Ambient Capability	122 degrees
Stroke	7.20 in (18.29 cm)

Frame

Circle - Blade Beam Thickness	6.30 in (16.00 cm)
Circle - Diameter	103.60 in (263.14 cm)
Drawbar - Height	8.50 in (21.59 cm)
Drawbar - Thickness	0.60 in (1.52 cm)
Drawbar - Width	8.90 in (22.61 cm)
Front Axle - Height to Center	32.20 in (81.79 cm)
Front Axle - Total Oscillation per Side	32 degrees
Front Axle - Wheel Lean - Left/Right	18 degrees
Front-Top/Bottom Plate - Thickness	2.00 in (5.08 cm)
Front-Top/Bottom Plate - Width	20.20 in (51.31 cm)

Front Axle

Ground Clearance	2.90 ft (0.88 m)
Oscillation - Total	32 degrees
Wheel Lean	18 degrees

Hydraulic System

Circuit Type	Electro-hydraulic load sensing closed center
Maximum System Pressure	3500 psi
Pump Flow	145.00 gpm (548.83 lpm)
Pump Output	145.00 gpm (548.83 lpm)
Pump Type	Variable piston
Relief Valve Pressure	3500 psi
Standby Pressure	450 psi

Moldboard

Arc Radius	21.70 in (55.12 cm)
Blade Width	24.00 ft (7.32 m)
Cutting Edge Thickness	1.10 in (2.79 cm)
Cutting Edge Width	13.00 in (33.02 cm)
End Bit - Thickness	1.00 in (2.54 cm)
End Bit - Width	8.00 in (20.32 cm)
Max Depth of Cut	25.90 in (65.79 cm)
Moldboard - Height	42.00 in (106.68 cm)
Moldboard - Thickness	2.00 in (5.08 cm)
Moldboard Height	42.00 in (106.68 cm)
Moldboard Length	24.00 ft (7.32 m)
Moldboard Thickness	2.00 in (5.08 cm)
Moldboard Width	24.00 ft (7.32 m)
Side Shift Left	34.30 in (87.12 cm)
Side Shift Right	49.00 in (124.46 cm)
Throat Clearance	6.40 in (16.26 cm)

Operating Specifications

Articulation Angle - Left/Right	25 degrees
Circle Gearbox Fluid Capacity	2.30 gal (8.71 l)
Cooling System Fluid Capacity	24.00 gal (90.84 l)
Forward - 1st	2.30 mph (3.70 kph)
Forward - 2nd	3.50 mph (5.63 kph)
Forward - 3rd	6.00 mph (9.66 kph)
Forward - 4th	9.30 mph (14.97 kph)
Forward - 5th	17.20 mph (27.68 kph)
Forward - 6th	26.70 mph (42.97 kph)
Fuel Capacity	350.00 gal (1,324.75 l)
Hydraulic System Fluid Capacity	70.00 gal (264.95 l)
Max Operation Weight - Front Axle	43,931.00 lbs (19,926.79 kg)
Max Operation Weight - Rear Axle	101,877.00 lbs (46,210.69 kg)
Max Operation Weight - Total	145,808.00 lbs (66,137.48 kg)
Operating Weight	137,694.00 lbs (62,457.03 kg)
Rear Diff/Final Drive Fluid Capacity	49.00 gal (185.47 l)
Reverse - 1st	3.4
Reverse - 2nd	8.90 mph (14.32 kph)
Reverse - 3rd	25.60 mph (41.20 kph)
Std Operation Weight - Front Axle	41,360.00 lbs (18,760.60 kg)
Std Operation Weight - Rear Axle	96,332.00 lbs (43,695.51 kg)
Std Operation Weight - Total	137,692.00 lbs (62,456.12 kg)
Steering Range - Left/Right	47.5 degrees
Tandem Case Fluid Capacity (each)	85.00 gal (321.73 l)
Tire Size	29.5-29 28PR
Top Speed - Forward	27.00 mph (43.45 kph)
Top Speed - Reverse	25.80 mph (41.52 kph)
Turning Radius - Outside Front Tires	40.70 ft (12.41 m)

Power Train

Brakes - Parking	Spring applied hydraulically released
Brakes - Secondary	Oil-actuated oil-disc
Brakes - Service	Oil-actuated oil-disc
Brakes - Service - Surface Area	15,733.00 cu in (257,818.25 cu cm)
Forward/Reverse Gears	6 Forward/3 Reverse
Transmission	Automatic electronic power shift

Ripper

Penetration Force	29,985.00 lbs (13,600.98 kg)
Pry-Out Force	41,052.00 lbs (18,620.90 kg)
Ripper Shank Holders	7
Ripping Depth - Maximum	17.90 in (45.47 cm)
Shank Holder Spacing - Maximum	23.80 in (60.45 cm)
Shank Holder Spacing - Minimum	23.40 in (59.44 cm)

Service Refill

Circle Drive Housing	2.00 gal (7.57 l)
Cooling System	24.00 gal (90.84 l)
Engine Oil	16.00 gal (60.56 l)
Front Wheel Spindle Bearing Housing	1.00 gal (3.79 l)
Fuel Capacity	350.00 gal (1,324.75 l)
Hydraulic System - Tank	36.00 gal (136.26 l)
Hydraulic System - Total	70.00 gal (264.95 l)
Tandem Housing - Each	85.00 gal (321.73 l)
Transmission - Differential - Final Drives	49.00 gal (185.47 l)

Standards

Brakes	ISO 3450
ROPS/FOPS	ISO 3471/ISO 3449
Sound	ISO 6394/ISO 6395
Steering	ISO 5010

Steering System

Articulation Angle	25 degrees
Turning Radius	40.70 ft (12.41 m)

Tandems

Drive Chain Pitch	3.00 in (7.62 cm)
Height	41.00 in (104.14 cm)
Sidewall Thickness - Inner	1.00 in (2.54 cm)
Sidewall Thickness - Outer	1.20 in (3.05 cm)
Tandem Oscillation - Front Down	20 degrees
Tandem Oscillation - Front Up	20 degrees
Wheel Axle Spacing	90.00 in (228.60 cm)
Width	13.90 in (35.31 cm)

Transmission

Max Speed - Forward	26.70 mph (42.97 kph)
Max Speed - Reverse	25.60 mph (41.20 kph)
Number of Gears - Forward	6
Number of Gears - Reverse	3
Transmission Type	automatic electronic power shift

Weights

Gross Vehicle Weight - Base - Front Axle	42,177.00 lbs (19,131.19 kg)
Gross Vehicle Weight - Base - Rear Axle	96,110.00 lbs (43,594.82 kg)
Gross Vehicle Weight - Base - Total	138,287.00 lbs (62,726.01 kg)
Gross Vehicle Weight - Maximum - Front Axle	45,856.00 lbs (20,799.96 kg)
Gross Vehicle Weight - Maximum - Rear Axle	107,001.00 lbs (48,534.90 kg)
Gross Vehicle Weight - Maximum - Total	152,857.00 lbs (69,334.85 kg)
Gross Vehicle Weight - Typically Equipped	145,151.00 lbs (65,839.47 kg)
Gross Vehicle Weight - Typically Equipped - Front Axle	43,100.00 lbs (19,549.86 kg)
Gross Vehicle Weight - Typically Equipped - Total	145,151.00 lbs (65,839.47 kg)
Operating Weight - Typically Equipped	145,151.00 lbs (65,839.47 kg)