Champion 710A is a motor grader used for road construction, maintenance, and site grading. Designed for precise blade control, the 710A is typically used to shape and level surfaces, cut ditches, spread material, and maintain gravel or dirt roads. As a Champion grader, it is associated with heavy-duty earthmoving applications and municipal or contractor fleets. The model designation 710A identifies a specific grader configuration within Champion's product line. Common uses include grading, leveling, snow removal, and finish work on highways, rural roads, and construction sites. It is recognized as a vintage or legacy motor grader model in the used equipment market.
Circle
Champion 710A Motor Grader Circle specifications
Blade Cutting Depth
2.80 ft (0.85 m)
Blade Ground Clearance
1.50 ft (0.46 m)
Blade Tip Angle - Front
47 degrees
Blade Tip Angle - Rear
5 degrees
Diameter
66.30 in (168.40 cm)
Rotation
360 degrees
Shift Left
30.60 in (77.72 cm)
Shift Right
29.50 in (74.93 cm)
Dimensions
Champion 710A Motor Grader Dimensions specifications
Blade Base
8.59 ft (2.62 m)
Height
11.17 ft (3.40 m)
Length
27.75 ft (8.46 m)
Overall Height With Cab
11.09 ft (3.38 m)
Overall Length
27.75 ft (8.46 m)
Overall Width
8.17 ft (2.49 m)
Tread Width
82.01 in (208.31 cm)
Weight
31,050.00 lbs (14,084.06 kg)
Wheelbase
20.00 ft (6.10 m)
Width
8.17 ft (2.49 m)
Engine
Champion 710A Motor Grader Engine specifications
Aspiration
Turbocharged
Bore
4.10 in (10.41 cm)
Displacement
360.10 cu in (5,900.99 cu cm)
Engine Make
Cummins
Engine Model
6B5.9
Gross Horsepower
148.00 hp (110.37 kw)
Net Power
140.00 hp (104.40 kw)
Number Of Cylinders
6
Power Measured @
2200 rpm
Stroke
4.80 in (12.19 cm)
Torque
440.00 lbs ft (596.55 nm)
Torque Measured @
1600 rpm
Front Axle
Champion 710A Motor Grader Front Axle specifications
Ground Clearance
2.00 ft (0.61 m)
Oscillation - Total
16 degrees
Wheel Lean
18 degrees
Hydraulic System
Champion 710A Motor Grader Hydraulic System specifications
Pump Flow
50.50 gpm (191.14 lpm)
Relief Valve Pressure
2500 psi
Moldboard
Champion 710A Motor Grader Moldboard specifications
Blade Down Pressure
16,495.00 lbs (7,482.02 kg)
Blade Pull At Max Weight
19,109.70 lbs (8,668.02 kg)
Max Reach Outside - Left
10.00 ft (3.05 m)
Max Reach Outside - Right
10.10 ft (3.08 m)
Moldboard Height
25.00 in (63.50 cm)
Moldboard Thickness
0.90 in (2.29 cm)
Moldboard Width
12.10 ft (3.69 m)
Side Shift Left
26.50 in (67.31 cm)
Side Shift Right
26.50 in (67.31 cm)
Operational
Champion 710A Motor Grader Operational specifications
Cooling System Fluid Capacity
11.70 gal (44.28 l)
Fuel Capacity
100.00 gal (378.50 l)
Hydraulic System Fluid Capacity
23.80 gal (90.08 l)
Oil System Fluid Capacity
4.40 gal (16.65 l)
Rear Diff/Final Drive Fluid Capacity
6.10 gal (23.09 l)
Std Operation Weight - Front Axle
9,400.00 lbs (4,263.77 kg)
Std Operation Weight - Rear Axle
21,230.00 lbs (9,629.78 kg)
Std Operation Weight - Total
30,630.00 lbs (13,893.55 kg)
Tandem Case Fluid Capacity (Each)
26.50 gal (100.30 l)
Tire Size
13.00 * 24, G-2
Transmission Fluid Capacity
10.30 gal (38.99 l)
Steering
Champion 710A Motor Grader Steering specifications
Articulation Angle
22 degrees
Turning Radius
25.50 ft (7.77 m)
Transmission
Champion 710A Motor Grader Transmission specifications
Max Speed - Forward
24.50 mph (39.43 kph)
Max Speed - Reverse
17.80 mph (28.65 kph)
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Transmission Type
Powershift
×
Stay Ahead of the Market
Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.
