Categories ↠ Motor Graders ↠ John Deere 672A

John Deere 672A Motor Grader

Category: Motor Graders ➔
Manufacturer: John Deere ➔
Model: 672A ➔

The John Deere 672A Motor Grader is a powerful and reliable piece of equipment designed for precision grading and leveling tasks. With a circle blade tip angle of 44 degrees at the front and 10 degrees at the rear, a circle diameter of 58 inches, and a maximum reach outside tires of up to 87.5 inches, this motor grader offers exceptional maneuverability and cutting capabilities. Powered by a turbocharged 6-414T engine producing 125 horsepower, and featuring a hydraulic system with a pump flow of 37.6 gpm, this machine ensures efficient performance on any job site.

See all John Deere 672As for sale

Circle

Blade Tip Angle - Front	44 degrees
Blade Tip Angle - Rear	10 degrees
Diameter	58.00 in (147.32 cm)
Max Lift Above Ground	16.20 in (41.15 cm)
Max Reach Outside Tires - Left	87.50 in (222.25 cm)
Max Reach Outside Tires - Right	84.70 in (215.14 cm)
Rotation	360 degrees
Shift Left	34.40 in (87.38 cm)
Shift Right	30.00 in (76.20 cm)

Dimensions

Blade Base	8.40 ft (2.56 m)
Front Ground Clearance	1.90 ft (0.58 m)
Height to Top of Isomount Cab	10.50 ft (3.20 m)
Overall Length	27.30 ft (8.32 m)
Tandem Axle Wheelbase	5.10 ft (1.55 m)
Wheelbase	19.60 ft (5.97 m)
Width Over Tires	7.90 ft (2.41 m)

Engine

Aspiration	Turbocharged
Displacement	414.00 cu in (6,784.26 cu cm)
Engine Model	6-414T
Max Power	125.00 hp (93.21 kw)
Net Power Gears 7-8	125.00 hp (93.21 kw)
Net Torque Gears 7-8	372.00 lbs ft (504.36 nm)
Number of Cylinders	6
Power Measured @	2300 rpm
Torque Measured @	1300 rpm

Front Axle

Ground Clearance	1.90 ft (0.58 m)
Oscillation - Total	30 degrees
Wheel Lean	20 degrees

Hydraulic System

Pump Flow	37.60 gpm (142.32 lpm)
Pump Type	Closed Center variable Displacement

Moldboard

Max Depth of Cut	6.00 in (15.24 cm)
Moldboard Height	24.00 in (60.96 cm)
Moldboard Thickness	0.90 in (2.29 cm)
Moldboard Width	12.00 ft (3.66 m)
Side Shift Left	26.90 in (68.33 cm)
Side Shift Right	26.90 in (68.33 cm)

Operating Specifications

Alternator Supplied Amperage	42 amps
Circle Gearbox Fluid Capacity	3.00 gal (11.36 l)
Cooling System Fluid Capacity	7.00 gal (26.50 l)
Fuel Capacity	60.00 gal (227.10 l)
Hydraulic System Fluid Capacity	38.00 gal (143.83 l)
Max Operation Weight - Front Axle	9,128.00 lbs (4,140.40 kg)
Max Operation Weight - Rear Axle	21,726.00 lbs (9,854.76 kg)
Max Operation Weight - Total	30,854.00 lbs (13,995.16 kg)
Oil System Fluid Capacity	5.00 gal (18.93 l)
Operating Voltage	25 volts
Std Operation Weight - Front Axle	8,702.00 lbs (3,947.17 kg)
Std Operation Weight - Rear Axle	18,650.00 lbs (8,459.51 kg)
Std Operation Weight - Total	27,352.00 lbs (12,406.67 kg)
Tandem Case Fluid Capacity (each)	5.00 gal (18.93 l)
Tire Size	13.00-24

Steering System

Articulation Angle	25 degrees
Turning Radius	22.60 ft (6.89 m)

Transmission

Max Speed - Forward	23.90 mph (38.46 kph)
Max Speed - Reverse	7.60 mph (12.23 kph)
Number of Gears - Forward	8
Number of Gears - Reverse	4
Transmission Type	power shift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon