Categories ↠ Motor Graders ↠ John Deere 672CH

John Deere 672CH Motor Grader

Category: Motor Graders ➔
Manufacturer: John Deere ➔
Model: 672CH ➔

The John Deere 672CH Motor Grader is a powerful and versatile machine designed for grading and leveling tasks on construction sites. With a turbocharged engine providing up to 198 horsepower, this motor grader offers exceptional performance and precision. Equipped with a 12-foot moldboard blade, hydraulic system with a flow rate of 45.6 gpm, and a maximum operating weight of 37,050 lbs, the 672CH is ideal for a wide range of road maintenance and earthmoving projects. Explore the detailed specifications to discover the capabilities of this reliable and efficient motor grader.

See all John Deere 672CHs for sale

Circle

Blade Tip Angle - Front	49 degrees
Blade Tip Angle - Rear	5 degrees
Diameter	59.90 in (152.15 cm)
Max Lift Above Ground	17.50 in (44.45 cm)
Max Reach Outside Tires - Left	85.10 in (216.15 cm)
Max Reach Outside Tires - Right	83.10 in (211.07 cm)
Rotation	360 degrees
Shift Left	31.00 in (78.74 cm)
Shift Right	28.60 in (72.64 cm)

Dimensions

Blade Base	8.80 ft (2.68 m)
Front Ground Clearance	1.90 ft (0.58 m)
Height to Top of Isomount Cab	10.20 ft (3.11 m)
Overall Length	28.20 ft (8.60 m)
Tandem Axle Wheelbase	5.10 ft (1.55 m)
Wheelbase	19.60 ft (5.97 m)
Width Over Tires	8.10 ft (2.47 m)

Engine

Aspiration	Turbocharged with Aftercooler
Displacement	414.00 cu in (6,784.26 cu cm)
Engine Model	6068H
Max Power	198.00 hp (147.65 kw)
Net Power Gear 1-2	145.00 hp (108.13 kw)
Net Power Gear 4-6	178.00 hp (132.74 kw)
Net Power Gear 5-6	198.00 hp (147.65 kw)
Net Power Gears 7-8	198.00 hp (147.65 kw)
Net Torque Gears 1-2	554.00 lbs ft (751.11 nm)
Net Torque Gears 3-4	611.00 lbs ft (828.39 nm)
Net Torque Gears 5-6	625.00 lbs ft (847.38 nm)
Net Torque Gears 7-8	625.00 lbs ft (847.38 nm)
Number of Cylinders	6
Power Measured @	2000 rpm
Torque Measured @	1000 rpm

Front Axle

Ground Clearance	1.90 ft (0.58 m)
Oscillation - Total	32 degrees
Wheel Lean	20 degrees

Hydraulic System

Pump Flow	45.60 gpm (172.60 lpm)
Pump Type	Closed center variable displacement
Relief Valve Pressure	2550 psi

Moldboard

Blade Pull at Max Weight	39,310.00 lbs (17,830.74 kg)
Moldboard Height	24.00 in (60.96 cm)
Moldboard Thickness	0.90 in (2.29 cm)
Moldboard Width	12.00 ft (3.66 m)
Side Shift Left	26.90 in (68.33 cm)
Side Shift Right	26.90 in (68.33 cm)

Operating Specifications

Alternator Supplied Amperage	55 amps
Circle Gearbox Fluid Capacity	4.00 gal (15.14 l)
Cooling System Fluid Capacity	11.00 gal (41.64 l)
Fuel Capacity	106.00 gal (401.21 l)
Hydraulic System Fluid Capacity	15.50 gal (58.67 l)
Max Operation Weight - Front Axle	11,180.00 lbs (5,071.17 kg)
Max Operation Weight - Rear Axle	25,870.00 lbs (11,734.45 kg)
Max Operation Weight - Total	37,050.00 lbs (16,805.62 kg)
Oil System Fluid Capacity	6.40 gal (24.22 l)
Operating Voltage	24 volts
Rear Diff/Final Drive Fluid Capacity	9.50 gal (35.96 l)
Std Operation Weight - Front Axle	10,060.00 lbs (4,563.14 kg)
Std Operation Weight - Rear Axle	22,260.00 lbs (10,096.98 kg)
Std Operation Weight - Total	32,320.00 lbs (14,660.12 kg)
Tandem Case Fluid Capacity (each)	20.00 gal (75.70 l)
Tire Size	13.00-24
Transmission Fluid Capacity	10.00 gal (37.85 l)

Steering System

Articulation Angle	25 degrees
Turning Radius	22.60 ft (6.89 m)

Transmission

Max Speed - Forward	25.00 mph (40.23 kph)
Max Speed - Reverse	25.00 mph (40.23 kph)
Number of Gears - Forward	8
Number of Gears - Reverse	8
Transmission Type	Power Shift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon