Categories ↠ Motor Graders ↠ Komatsu GD675-5

Komatsu GD675-5 Motor Grader

Category: Motor Graders ➔
Manufacturer: Komatsu ➔
Model: GD675-5 ➔

The Komatsu GD675-5 Motor Grader is a powerful and versatile machine designed for heavy-duty grading and earthmoving tasks. With a robust engine delivering up to 163 horsepower and a wide range of operating specifications, including a circle blade tip angle of 40 degrees at the front and 5 degrees at the rear, this motor grader offers exceptional performance and efficiency on the job site. Built to handle various terrains and demanding conditions, the GD675-5 boasts a circle diameter of 60.3 inches, a maximum reach outside tires of 98.5 inches on both sides, and a transmission with eight forward gears and four reverse gears. Whether leveling surfaces, cutting ditches, or maintaining roads, this motor grader is a reliable asset for construction and infrastructure projects.

See all Komatsu GD675-5s for sale

Circle

Blade Tip Angle - Front	40 degrees
Blade Tip Angle - Rear	5 degrees
Diameter	60.30 in (153.16 cm)
Max Lift Above Ground	18.90 in (48.01 cm)
Max Reach Outside Tires - Left	98.50 in (250.19 cm)
Max Reach Outside Tires - Right	98.50 in (250.19 cm)
Rotation	360 degrees
Shift Left	23.30 in (59.18 cm)
Shift Right	23.30 in (59.18 cm)

Dimensions

Blade Base	8.50 ft (2.59 m)
Height to Top of Isomount Cab	10.50 ft (3.20 m)
Overall Length	34.70 ft (10.58 m)
Tandem Axle Wheelbase	5.10 ft (1.55 m)
Wheelbase	21.30 ft (6.49 m)
Width Over Tires	8.70 ft (2.65 m)

Engine

Aspiration	Turbocharged
Bore	4.30 in (10.92 cm)
Engine Model	SAA6D107E-1
Net Power Gear 1-3	134.00 hp (99.93 kw)
Net Power Gear 4-6	149.00 hp (111.11 kw)
Net Power Gears 7-8	163.00 hp (121.55 kw)
Number of Cylinders	6
Power Measured @	2000 rpm
Stroke	4.90 in (12.45 cm)
Torque	694.10 lbs ft (941.06 nm)
Torque Measured @	1450 rpm

Front Axle

Ground Clearance	2.10 ft (0.64 m)
Oscillation - Total	32 degrees
Wheel Lean	16 degrees

Hydraulic System

Pump Flow	52.90 gpm (200.23 lpm)
Pump Type	Load-sensing closed center hydraulics
Relief Valve Pressure	435.2 psi

Moldboard

Max Depth of Cut	24.30 in (61.72 cm)
Moldboard Height	25.40 in (64.52 cm)
Moldboard Thickness	0.80 in (2.03 cm)
Moldboard Width	14.20 ft (4.33 m)
Side Shift Left	44.30 in (112.52 cm)
Side Shift Right	44.30 in (112.52 cm)

Operating Specifications

Alternator Supplied Amperage	60 amps
Circle Gearbox Fluid Capacity	1.90 gal (7.19 l)
Cooling System Fluid Capacity	7.80 gal (29.52 l)
Fuel Capacity	109.90 gal (415.97 l)
Hydraulic System Fluid Capacity	18.30 gal (69.27 l)
Operating Voltage	24 volts
Rear Diff/Final Drive Fluid Capacity	4.50 gal (17.03 l)
Std Operation Weight - Front Axle	9,645.30 lbs (4,375.04 kg)
Std Operation Weight - Rear Axle	25,529.60 lbs (11,580.05 kg)
Std Operation Weight - Total	35,174.80 lbs (15,955.04 kg)
Tandem Case Fluid Capacity (each)	15.10 gal (57.15 l)
Tire Size	17.5R25
Transmission Fluid Capacity	11.90 gal (45.04 l)

Steering System

Articulation Angle	25 degrees
Turning Radius	24.30 ft (7.41 m)

Transmission

Max Speed - Forward	27.50 mph (44.26 kph)
Max Speed - Reverse	25.00 mph (40.23 kph)
Number of Gears - Forward	8
Number of Gears - Reverse	4
Transmission Type	Full power shift transmission

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon