Categories ↠ Motor Graders ↠ Mauldin MG622

Mauldin MG622 Motor Grader

Category: Motor Graders ➔
Manufacturer: Mauldin ➔
Model: MG622 ➔

Circle

Diameter	54.00 in (137.16 cm)
Max Lift Above Ground	14.10 in (35.81 cm)
Max Reach Outside Tires - Left	77.30 in (196.34 cm)
Max Reach Outside Tires - Right	71.50 in (181.61 cm)

Dimensions

Blade Base	7.80 ft (2.38 m)
Height to Top of Isomount Cab	9.70 ft (2.96 m)
Overall Length	27.40 ft (8.35 m)
Tandem Axle Wheelbase	4.80 ft (1.46 m)
Wheelbase	17.40 ft (5.30 m)
Width Over Tires	8.40 ft (2.56 m)

Engine

Aspiration	Turbocharged and aftercooled
Displacement	246.60 cu in (4,041.06 cu cm)
Max Power	133.00 hp (99.18 kw)
Net Torque Gears 1-2	363.30 lbs ft (492.56 nm)

Front Axle

Oscillation - Total	30 degrees
Wheel Lean	20 degrees

Moldboard

Max Depth of Cut	23.50 in (59.69 cm)
Moldboard Height	22.00 in (55.88 cm)
Moldboard Width	12.00 ft (3.66 m)
Side Shift Left	31.30 in (79.50 cm)
Side Shift Right	26.80 in (68.07 cm)

Operating Specifications

Fuel Capacity	40.00 gal (151.40 l)
Hydraulic System Fluid Capacity	25.00 gal (94.63 l)
Operating Voltage	12 volts
Std Operation Weight - Front Axle	6,695.00 lbs (3,036.80 kg)
Std Operation Weight - Rear Axle	16,145.00 lbs (7,323.26 kg)
Std Operation Weight - Total	22,840.00 lbs (10,360.06 kg)
Tire Size	15.5-25

Steering System

Articulation Angle	24 degrees
Turning Radius	20.50 ft (6.25 m)

Transmission

Max Speed - Forward	22.00 mph (35.41 kph)
Max Speed - Reverse	22.00 mph (35.41 kph)
Number of Gears - Forward	2
Number of Gears - Reverse	2
Transmission Type	hydrostatic

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon