Categories ↠ Motor Graders ↠ New Holland F140

New Holland F140 Motor Grader

Category: Motor Graders ➔
Manufacturer: New Holland ➔
Model: F140 ➔

Introducing the New Holland F140 Motor Grader, a rugged and efficient machine designed for grading and shaping road surfaces with precision. With a powerful engine, advanced hydraulic system, and a variety of operating specifications, this motor grader is built to handle a wide range of tasks with ease. From circle blade tip angles to transmission capabilities, the F140 offers superior performance and reliability for any grading job. Get ready to conquer any terrain with the New Holland F140 Motor Grader.

See all New Holland F140s for sale

Circle

Blade Tip Angle - Front	40 degrees
Blade Tip Angle - Rear	5 degrees
Diameter	69.10 in (175.51 cm)
Max Lift Above Ground	17.50 in (44.45 cm)
Max Reach Outside Tires - Left	62.30 in (158.24 cm)
Max Reach Outside Tires - Right	68.60 in (174.24 cm)
Rotation	360 degrees

Dimensions

Blade Base	8.50 ft (2.59 m)
Height to Top of Isomount Cab	11.00 ft (3.35 m)
Overall Length	28.00 ft (8.53 m)
Rear Ground Clearance	2.10 ft (0.64 m)
Tandem Axle Wheelbase	5.30 ft (1.62 m)
Wheelbase	20.50 ft (6.25 m)
Width Over Tires	8.30 ft (2.53 m)

Engine

Aspiration	turbocharged
Displacement	360.10 cu in (5,900.99 cu cm)
Engine Model	6BTA5.9 Tier 1
Net Torque Gears 7-8	104.00 lbs ft (141.00 nm)
Power Measured @	2200 rpm

Front Axle

Ground Clearance	2.10 ft (0.64 m)
Oscillation - Total	19 degrees
Wheel Lean	18 degrees

Hydraulic System

Pump Flow	50.80 gpm (192.28 lpm)
Pump Type	Full Hydraulic Load Sensing
Relief Valve Pressure	2596.2 psi

Moldboard

Blade Down Pressure	19,039.20 lbs (8,636.05 kg)
Max Depth of Cut	28.10 in (71.37 cm)
Moldboard Height	24.50 in (62.23 cm)
Moldboard Thickness	0.90 in (2.29 cm)
Moldboard Width	12.10 ft (3.69 m)
Side Shift Left	21.00 in (53.34 cm)
Side Shift Right	27.10 in (68.83 cm)

Operating Specifications

Alternator Supplied Amperage	70 amps
Circle Gearbox Fluid Capacity	0.80 gal (3.03 l)
Cooling System Fluid Capacity	10.60 gal (40.12 l)
Fuel Capacity	89.90 gal (340.27 l)
Hydraulic System Fluid Capacity	25.00 gal (94.63 l)
Max Operation Weight - Front Axle	8,172.60 lbs (3,707.03 kg)
Max Operation Weight - Rear Axle	21,667.10 lbs (9,828.04 kg)
Max Operation Weight - Total	29,839.60 lbs (13,535.03 kg)
Oil System Fluid Capacity	3.80 gal (14.38 l)
Operating Voltage	24 volts
Tandem Case Fluid Capacity (each)	8.00 gal (30.28 l)
Tire Size	13.00 x 24 (12PR)
Transmission Fluid Capacity	6.70 gal (25.36 l)

Steering System

Articulation Angle	25 degrees
Turning Radius	24.00 ft (7.32 m)

Transmission

Max Speed - Forward	26.80 mph (43.13 kph)
Max Speed - Reverse	17.80 mph (28.65 kph)
Number of Gears - Forward	8
Number of Gears - Reverse	4
Transmission Type	Direct Drive Power-Shift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon