Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Max Lift Above Ground | 18.9 in |
Max Reach Outside Tires - Left | 99.3 in |
Max Reach Outside Tires - Right | 126.4 in |
Shift Left | 25.4 in |
Shift Right | 29.8 in |
Blade Base | 8.3 ft |
Front Ground Clearance | 0.5 ft |
Height to Top of Isomount Cab | 11.1 ft |
Overall Length | 32.8 ft |
Rear Ground Clearance | 1.1 ft |
Tandem Axle Wheelbase | 5.1 ft |
Wheelbase | 19.7 ft |
Width Over Tires | 8.6 ft |
Aspiration | turbocharged water-cooled |
Displacement | 358.9 cu in |
Engine Model | CNH 4-Stroke Diesel Engine |
Max Power | 175 hp (131 kw) |
Net Power Gear 5-6 | 175 hp (131 kw) |
Number of Cylinders | 6 |
Power Measured @ | 2100 rpm |
Ground Clearance | 2.2 ft |
Oscillation - Total | 15 deg |
Wheel Lean | 21 deg |
Pump Flow | 33.3 gpm |
Pump Type | Swash Plate, Variable Displacement |
Relief Valve Pressure | 2900.8 psi |
Max Depth of Cut | 19.7 in |
Moldboard Height | 6 in |
Moldboard Thickness | 0.8 in |
Moldboard Width | 12.1 ft |
Side Shift Left | 25.4 in |
Side Shift Right | 29.8 in |
Alternator Supplied Amperage | 70 amps |
Fuel Capacity | 72.7 gal |
Hydraulic System Fluid Capacity | 52.9 gal |
Max Operation Weight - Front Axle | 11464.1 lbs |
Max Operation Weight - Rear Axle | 25353.2 lbs |
Max Operation Weight - Total | 35714.9 lbs |
Oil System Fluid Capacity | 3.4 gal |
Operating Voltage | 24 volts |
Std Operation Weight - Front Axle | 1005.4 lbs |
Std Operation Weight - Rear Axle | 22357.1 lbs |
Std Operation Weight - Total | 32487.4 lbs |
Tandem Case Fluid Capacity (each) | 18 gal |
Tire Size | 17.5R25EM |
Transmission Fluid Capacity | 5.6 gal |
Articulation Angle | 28 deg |
Turning Radius | 27067 ft |
Max Speed - Forward | 23.3 mph (37 kph) |
Max Speed - Reverse | 16.9 mph (26 kph) |
Number of Gears - Forward | 6 |
Number of Gears - Reverse | 3 |
Transmission Type | Full Powershift Transmission |