Categories ↠ Motor Graders ↠ New Holland G170

New Holland G170 Motor Grader

Category: Motor Graders ➔
Manufacturer: New Holland ➔
Model: G170 ➔

The New Holland G170 Motor Grader is a powerful machine designed for precision grading applications. With a turbocharged engine producing up to 205 horsepower, this grader boasts impressive capabilities including a moldboard height of 24.5 inches, a circle rotation of 360 degrees, and a front axle oscillation of 19 degrees. Equipped with a full power shift direct drive transmission and hydraulic system with 49 gpm pump flow, the G170 ensures efficient and smooth operation for a variety of road construction and maintenance tasks.

See all New Holland G170s for sale

Blades

Maximum Shoulder Reach Outside of Tires - Left	6.30 in (16.00 cm)
Maximum Shoulder Reach Outside of Tires - Right	7.20 in (18.29 cm)
Moldboard Sideshift - Left	21.00 in (53.34 cm)
Moldboard Sideshift - Right	28.00 in (71.12 cm)

Circle

Blade Tip Angle - Front	42 degrees
Blade Tip Angle - Rear	5 degrees
Diameter	69.10 in (175.51 cm)
Max Lift Above Ground	17.60 in (44.70 cm)
Max Reach Outside Tires - Left	77.90 in (197.87 cm)
Max Reach Outside Tires - Right	85.60 in (217.42 cm)
Rotation	360 degrees

Dimensions

Blade Base	8.50 ft (2.59 m)
Front Ground Clearance	2.10 ft (0.64 m)
Height to Top of Isomount Cab	10.40 ft (3.17 m)
Overall Length	28.00 ft (8.53 m)
Rear Ground Clearance	1.30 ft (0.40 m)
Tandem Axle Wheelbase	5.30 ft (1.62 m)
Wheelbase	20.50 ft (6.25 m)
Width Over Tires	8.30 ft (2.53 m)

Engine

Aspiration	Turbocharged
Base Power (1st Gear) - Net	180.00 hp (134.23 kw)
Displacement	409.00 cu in (6,702.32 cu cm)
Engine Model	QSB 6.7L
Max Power	205.00 hp (152.87 kw)
Net Power Gears 7-8	205.00 hp (152.87 kw)
Net Torque Gears 7-8	653.00 lbs ft (885.34 nm)
Number of Cylinders	6
Power Measured @	2200 rpm
Torque Measured @	1500 rpm

Front Axle

Ground Clearance	2.10 ft (0.64 m)
Oscillation - Total	19 degrees
Wheel Lean	17.5 degrees

Hydraulic System

Pump Flow	49.00 gpm (185.47 lpm)
Pump Type	Piston pump variable displacement
Relief Valve Pressure	2600 psi

Moldboard

Blade Down Pressure	16,063.00 lbs (7,286.06 kg)
Moldboard Height	24.50 in (62.23 cm)
Moldboard Length	14.00 ft (4.27 m)
Moldboard Thickness	0.90 in (2.29 cm)
Moldboard Width	14.00 ft (4.27 m)
Side Shift Left	21.00 in (53.34 cm)
Side Shift Right	28.00 in (71.12 cm)

Operating Specifications

Alternator Supplied Amperage	80 amps
Circle Gearbox Fluid Capacity	0.80 gal (3.03 l)
Cooling System Fluid Capacity	10.50 gal (39.74 l)
Fuel Capacity	90.00 gal (340.65 l)
Hydraulic System Fluid Capacity	47.50 gal (179.79 l)
Operating Voltage	24 volts
Operating Weight	31,786.00 lbs (14,417.90 kg)
Rear Diff/Final Drive Fluid Capacity	7.70 gal (29.14 l)
Std Operation Weight - Front Axle	9,370.00 lbs (4,250.17 kg)
Std Operation Weight - Rear Axle	22,419.00 lbs (10,169.10 kg)
Std Operation Weight - Total	32,077.00 lbs (14,549.90 kg)
Tandem Case Fluid Capacity (each)	7.70 gal (29.14 l)
Tire Size	14.00x24 10 Ply G2
Transmission Fluid Capacity	5.00 gal (18.93 l)

Steering System

Articulation Angle	25 degrees
Turning Radius	24.00 ft (7.32 m)

Transmission

Max Speed - Forward	26.60 mph (42.81 kph)
Max Speed - Reverse	17.70 mph (28.49 kph)
Number of Gears - Forward	8
Number of Gears - Reverse	4
Transmission Type	Full power shift direct drive

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon