Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Blade Tip Angle - Front | 44 deg |
Blade Tip Angle - Rear | 6.5 deg |
Diameter | 66.3 in |
Max Lift Above Ground | 17.5 in |
Max Reach Outside Tires - Left | 79.5 in |
Max Reach Outside Tires - Right | 79 in |
Rotation | 360 deg |
Shift Left | 30.5 in |
Shift Right | 29.5 in |
Blade Base | 8.6 ft |
Height to Top of Isomount Cab | 10.2 ft |
Overall Length | 30 ft |
Wheelbase | 20 ft |
Width Over Tires | 8.4 ft |
Aspiration | Turbocharged |
Displacement | 436 cu in |
Engine Model | D7DGCE2 |
Max Power | 228 hp (170 kw) |
Net Power Gears 7-8 | 228 hp (170 kw) |
Net Torque Gears 7-8 | 774 lbs ft |
Number of Cylinders | 6 |
Power Measured @ | 2200 rpm |
Torque Measured @ | 1400 rpm |
Ground Clearance | 2.1 ft |
Oscillation - Total | 16 deg |
Wheel Lean | 18 deg |
Pump Flow | 75.1 gpm |
Pump Type | load sensing hydraulic |
Relief Valve Pressure | 2700 psi |
Blade Down Pressure | 17904 lbs |
Blade Pull at Max Weight | 22685 lbs |
Max Depth of Cut | 32 in |
Moldboard Height | 25 in |
Moldboard Thickness | 0.9 in |
Moldboard Width | 12 ft |
Side Shift Left | 26.5 in |
Side Shift Right | 26.5 in |
Alternator Supplied Amperage | 80 amps |
Cooling System Fluid Capacity | 7.4 gal |
Fuel Capacity | 100 gal |
Hydraulic System Fluid Capacity | 35.4 gal |
Operating Voltage | 24 volts |
Rear Diff/Final Drive Fluid Capacity | 6.1 gal |
Std Operation Weight - Front Axle | 10295.6 lbs |
Std Operation Weight - Rear Axle | 25205.5 lbs |
Std Operation Weight - Total | 35501.1 lbs |
Tandem Case Fluid Capacity (each) | 26.5 gal |
Tire Size | 14.00 x 24, G-2 |
Transmission Fluid Capacity | 10.1 gal |
Articulation Angle | 22 deg |
Max Speed - Forward | 28.5 mph (45 kph) |
Max Speed - Reverse | 20.4 mph (32 kph) |
Number of Gears - Forward | 8 |
Number of Gears - Reverse | 4 |
Transmission Type | Powershift |