The Volvo G740 VHP Motor Grader offers powerful performance and precision for a variety of grading tasks. With a Circle Blade Tip Angle of 44 degrees in the front and 2.5 degrees in the rear, a Circle Diameter of 66.3 inches, and a Circle Max Reach of up to 79.5 inches outside the tires, this machine provides superior control and stability. Equipped with a Turbocharged engine boasting 235 horsepower and a load sensing hydraulic system pump, the G740 VHP ensures efficient operation and maximum productivity on the job site.
Circle
Volvo G740 VHP Motor Grader Circle specifications
Blade Tip Angle - Front
44 degrees
Blade Tip Angle - Rear
2.5 degrees
Diameter
66.30 in (168.40 cm)
Max Lift Above Ground
17.20 in (43.69 cm)
Max Reach Outside Tires - Left
79.50 in (201.93 cm)
Max Reach Outside Tires - Right
79.00 in (200.66 cm)
Rotation
360 degrees
Shift Left
30.50 in (77.47 cm)
Shift Right
29.50 in (74.93 cm)
Dimensions
Volvo G740 VHP Motor Grader Dimensions specifications
Blade Base
9.00 ft (2.74 m)
Height to Top of Isomount Cab
10.20 ft (3.11 m)
Overall Length
28.40 ft (8.66 m)
Wheelbase
20.50 ft (6.25 m)
Width Over Tires
8.40 ft (2.56 m)
Engine
Volvo G740 VHP Motor Grader Engine specifications
Aspiration
Turbocharged
Displacement
659.10 cu in (10,800.74 cu cm)
Engine Model
M11
Max Power
235.00 hp (175.24 kw)
Net Power Gears 7-8
235.00 hp (175.24 kw)
Net Torque Gears 7-8
845.00 lbs ft (1,145.65 nm)
Power Measured @
2100 rpm
Torque Measured @
1300 rpm
Front Axle
Volvo G740 VHP Motor Grader Front Axle specifications
Ground Clearance
2.10 ft (0.64 m)
Oscillation - Total
16 degrees
Wheel Lean
18 degrees
Hydraulic System
Volvo G740 VHP Motor Grader Hydraulic System specifications
Pump Flow
48.40 gpm (183.19 lpm)
Pump Type
load sensing hydraulic
Relief Valve Pressure
2500 psi
Moldboard
Volvo G740 VHP Motor Grader Moldboard specifications
Blade Down Pressure
18,904.00 lbs (8,573.24 kg)
Blade Pull at Max Weight
22,424.00 lbs (10,169.61 kg)
Max Depth of Cut
31.50 in (80.01 cm)
Moldboard Height
29.00 in (73.66 cm)
Moldboard Thickness
1.00 in (2.54 cm)
Moldboard Width
15.00 ft (4.57 m)
Side Shift Left
26.50 in (67.31 cm)
Side Shift Right
26.50 in (67.31 cm)
Operating Specifications
Volvo G740 VHP Motor Grader Operating Specifications specifications
Alternator Supplied Amperage
75 amps
Cooling System Fluid Capacity
13.30 gal (50.34 l)
Fuel Capacity
100.00 gal (378.50 l)
Hydraulic System Fluid Capacity
23.80 gal (90.08 l)
Operating Voltage
24 volts
Rear Diff/Final Drive Fluid Capacity
6.10 gal (23.09 l)
Std Operation Weight - Front Axle
10,694.70 lbs (4,850.20 kg)
Std Operation Weight - Rear Axle
24,916.70 lbs (11,300.09 kg)
Std Operation Weight - Total
35,611.30 lbs (16,150.25 kg)
Tandem Case Fluid Capacity (each)
26.50 gal (100.30 l)
Tire Size
14.00 x 24 G-2
Transmission Fluid Capacity
10.10 gal (38.23 l)
Steering System
Volvo G740 VHP Motor Grader Steering System specifications
Articulation Angle
22 degrees
Transmission
Volvo G740 VHP Motor Grader Transmission specifications
Max Speed - Forward
27.20 mph (43.77 kph)
Max Speed - Reverse
19.50 mph (31.38 kph)
Number of Gears - Forward
8
Number of Gears - Reverse
4
Transmission Type
Powershift
×
Stay Ahead of the Market
Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.
