The Volvo G930 is a motor grader designed for road construction, maintenance, and site grading applications. It is part of Volvo Construction Equipment's G-series lineup and is used to shape, level, and finish surfaces on highways, municipal roads, mining sites, and large earthmoving projects. The G930 typically features a moldboard, articulated frame, and hydraulic controls for precise blade positioning and material control. It is commonly configured with all-wheel drive and a cab designed for operator visibility and comfort. The Volvo G930 is recognized for grading accuracy, maneuverability, and versatility in demanding earthmoving and roadwork environments.
Circle
Volvo G930 Motor Grader Circle specifications
Blade Tip Angle - Front
47 degrees
Blade Tip Angle - Rear
5 degrees
Diameter
64.00 in (162.56 cm)
Max Lift Above Ground
19.40 in (49.28 cm)
Max Reach Outside Tires - Left
80.00 in (203.20 cm)
Max Reach Outside Tires - Right
79.00 in (200.66 cm)
Rotation
360 degrees
Shift Left
30.50 in (77.47 cm)
Shift Right
29.50 in (74.93 cm)
Dimensions
Volvo G930 Motor Grader Dimensions specifications
Blade Base
8.58 ft (2.62 m)
Front Ground Clearance
2.00 ft (0.61 m)
Height
10.25 ft (3.12 m)
Height To Top Of Isomount Cab
10.42 ft (3.18 m)
Length
29.42 ft (8.97 m)
Overall Length
29.25 ft (8.92 m)
Weight
42,500.00 lbs (19,277.70 kg)
Wheelbase
20.43 ft (6.23 m)
Width
8.33 ft (2.54 m)
Width Over Tires
8.25 ft (2.51 m)
Engine
Volvo G930 Motor Grader Engine specifications
Aspiration
Turbocharged, Aftercooled
Displacement
436.00 cu in (7,144.78 cu cm)
Engine Make
2244
Engine Model
D7EGCE3
Max Power
204.00 hp (152.13 kw)
Net Power Gears 7-8
204.00 hp (152.13 kw)
Net Torque Gears 7-8
684.00 lbs ft (927.37 nm)
Number Of Cylinders
6
Power Measured @
1800 rpm
Torque Measured @
1550 rpm
Front Axle
Volvo G930 Motor Grader Front Axle specifications
Ground Clearance
2.00 ft (0.61 m)
Oscillation - Total
16 degrees
Wheel Lean
18 degrees
Hydraulic System
Volvo G930 Motor Grader Hydraulic System specifications
Pump Flow
55.00 gpm (208.18 lpm)
Pump Type
Axial piston pump
Relief Valve Pressure
3000 psi
Moldboard
Volvo G930 Motor Grader Moldboard specifications
Blade Down Pressure
18,021.00 lbs (8,174.20 kg)
Blade Pull At Max Weight
28,260.00 lbs (12,818.54 kg)
Max Depth Of Cut
31.00 in (78.74 cm)
Moldboard Height
25.00 in (63.50 cm)
Moldboard Thickness
0.90 in (2.29 cm)
Moldboard Width
12.00 ft (3.66 m)
Side Shift Left
26.50 in (67.31 cm)
Side Shift Right
26.50 in (67.31 cm)
Operational
Volvo G930 Motor Grader Operational specifications
Alternator Supplied Amperage
80 amps
Cooling System Fluid Capacity
8.20 gal (31.04 l)
Fuel Capacity
92.00 gal (348.22 l)
Hydraulic System Fluid Capacity
24.00 gal (90.84 l)
Max Operation Weight - Front Axle
16,700.00 lbs (7,575.00 kg)
Max Operation Weight - Rear Axle
31,400.00 lbs (14,242.82 kg)
Max Operation Weight - Total
42,500.00 lbs (19,277.70 kg)
Oil System Fluid Capacity
5.70 gal (21.57 l)
Operating Voltage
24 V
Std Operation Weight - Front Axle
10,360.00 lbs (4,699.22 kg)
Std Operation Weight - Rear Axle
24,470.00 lbs (11,099.42 kg)
Std Operation Weight - Total
34,830.00 lbs (15,798.64 kg)
Tandem Case Fluid Capacity (Each)
26.40 gal (99.92 l)
Tire Size
14:00 x 24, G-2
Transmission Fluid Capacity
16.00 gal (60.56 l)
Steering
Volvo G930 Motor Grader Steering specifications
Articulation Angle
50 degrees
Turning Radius
23.90 ft (7.28 m)
Transmission
Volvo G930 Motor Grader Transmission specifications
Max Speed - Forward
28.40 mph (45.71 kph)
Max Speed - Reverse
20.00 mph (32.19 kph)
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Transmission Type
HTE 840, Fully sequential, direct drive, volvo powershift transmission
×
Stay Ahead of the Market
Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.
