The Volvo G976 is a motor grader designed for road construction, site preparation, and maintenance applications. As part of Volvo's grader lineup, it is used for shaping and leveling surfaces, maintaining haul roads, and performing fine grading work. Motor graders like the G976 typically feature a central moldboard for blade control, articulated steering, and a cab configured for operator visibility and control. The model is associated with heavy-duty grading tasks in construction, mining, and municipal work. Volvo motor graders are known for integration with grading systems, durable frames, and service access suited to demanding jobsite conditions.
Circle
Volvo G976 Motor Grader Circle specifications
Blade Tip Angle - Front
45 degrees
Blade Tip Angle - Rear
6 degrees
Diameter
64.00 in (162.56 cm)
Max Reach Outside Tires - Left
78.00 in (198.12 cm)
Max Reach Outside Tires - Right
77.00 in (195.58 cm)
Rotation
360 degrees
Shift Left
30.50 in (77.47 cm)
Shift Right
29.50 in (74.93 cm)
Dimensions
Volvo G976 Motor Grader Dimensions specifications
Blade Base
9.08 ft (2.77 m)
Height
10.58 ft (3.23 m)
Height To Top Of Isomount Cab
10.42 ft (3.18 m)
Length
31.17 ft (9.50 m)
Overall Length
31.08 ft (9.47 m)
Weight
43,650.00 lbs (19,799.33 kg)
Wheelbase
21.33 ft (6.50 m)
Width
9.25 ft (2.82 m)
Width Over Tires
9.08 ft (2.77 m)
Engine
Volvo G976 Motor Grader Engine specifications
Aspiration
Turbocharged, Aftercooled
Displacement
573.00 cu in (9,389.81 cu cm)
Engine Make
2244
Engine Model
D9B
Max Power
262.00 hp (195.38 kw)
Net Power Gears 7-8
262.00 hp (195.38 kw)
Net Torque Gears 7-8
876.00 lbs ft (1,187.68 nm)
Number Of Cylinders
6
Power Measured @
1700 rpm
Torque Measured @
1550 rpm
Front Axle
Volvo G976 Motor Grader Front Axle specifications
Ground Clearance
23.20 ft (7.07 m)
Oscillation - Total
16 degrees
Wheel Lean
18 degrees
Hydraulic System
Volvo G976 Motor Grader Hydraulic System specifications
Pump Flow
55.00 gpm (208.18 lpm)
Pump Type
Axial piston pump
Relief Valve Pressure
3000 psi
Moldboard
Volvo G976 Motor Grader Moldboard specifications
Blade Down Pressure
21,574.00 lbs (9,785.81 kg)
Blade Pull At Max Weight
40,000.00 lbs (18,143.72 kg)
Max Depth Of Cut
30.50 in (77.47 cm)
Moldboard Height
29.10 in (73.91 cm)
Moldboard Thickness
1.00 in (2.54 cm)
Moldboard Width
12.00 ft (3.66 m)
Side Shift Left
26.50 in (67.31 cm)
Side Shift Right
26.50 in (67.31 cm)
Operational
Volvo G976 Motor Grader Operational specifications
Alternator Supplied Amperage
80 amps
Cooling System Fluid Capacity
12.40 gal (46.93 l)
Fuel Capacity
132.00 gal (499.62 l)
Hydraulic System Fluid Capacity
38.00 gal (143.83 l)
Max Operation Weight - Front Axle
18,500.00 lbs (8,391.47 kg)
Max Operation Weight - Rear Axle
35,000.00 lbs (15,875.75 kg)
Max Operation Weight - Total
51,500.00 lbs (23,360.04 kg)
Oil System Fluid Capacity
10.40 gal (39.36 l)
Operating Voltage
24 V
Std Operation Weight - Front Axle
12,340.00 lbs (5,597.34 kg)
Std Operation Weight - Rear Axle
31,310.00 lbs (14,201.99 kg)
Std Operation Weight - Total
43,650.00 lbs (19,799.33 kg)
Tandem Case Fluid Capacity (Each)
26.40 gal (99.92 l)
Tire Size
14:00 x 24, G-2
Transmission Fluid Capacity
16.00 gal (60.56 l)
Steering
Volvo G976 Motor Grader Steering specifications
Articulation Angle
21 degrees
Turning Radius
25.10 ft (7.65 m)
Transmission
Volvo G976 Motor Grader Transmission specifications
Max Speed - Forward
27.40 mph (44.10 kph)
Max Speed - Reverse
19.30 mph (31.06 kph)
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Transmission Type
HTE 840, Fully sequential, direct drive, Volvo powershift transmission
×
Stay Ahead of the Market
Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.
