Create a CEG Account  /  CEG Login
☰
Parts
Buyer's Guides
Digital Issues
Videos


John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Specs

Additional Information

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Additional Information specifications
Date Collected 2022-07-21T00:00:00 - Starting 2026

Anti-Scalp Rollers

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Anti-Scalp Rollers specifications
Front Deck Caster Wheels Two, 11x4-5, flat-free - Starting 2026
Type Flat-free - Starting 2026
Wing Deck Caster Wheels Four, 11x4-5, flat-free - Starting 2026

Blades

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Blades specifications
Blade Length 22.00 in (55.88 cm) - Starting 2026
Blade Thickness 0.31 in (0.79 cm) - Starting 2026
Blade Tip Speed 13000.0 fpm - Starting 2026
Blade Width 2.50 in (6.35 cm) - Starting 2026
Interchangeable Mower Blades Between All Decks Yes - Starting 2026
Total Mower Blades Seven, three center and two each side - Starting 2026

Brakes

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Brakes specifications
Parking Brakes Hand brake - Starting 2026
Steering Brakes Standard - Starting 2026
Type Internal, wet disc - Starting 2026

Buyer's Notes

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Buyer's Notes specifications
Certification ANSI B71.4 - Starting 2026
Warranty 24 months - Starting 2026

Controls

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Controls specifications
Circuit Series - Starting 2026
Deck Drive Pump Displacement, axial piston pump, 2.48 cu in. cu in. - Starting 2026
Deck Motor Displacement, gear motor, 2.5 cu in. - Starting 2026
Deck Motor - Type Hydraulic, open center, closed loop - Starting 2026
Forward/Reverse Two-pedal - Starting 2026
Indicator Lights Engine air heater, oil pressure light, engine temperature light, fuel gauge, hydraulic oil temperature light - Starting 2026
Mower Lift Three two-function switches - Starting 2026
Park Brake Foot pedal/disk - Starting 2026
Power Take-Off (PTO) Engagement Electric solenoid switch - Starting 2026
Power Take-Off (PTO) Engagement - Type Hydraulic, independent - Starting 2026
Power Take-Off (PTO) Engagement/Disengagement Electric solenoid - Starting 2026
Throttle Hand - Starting 2026

Dimensions

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Dimensions specifications
Ground Clearance 6.50 in (16.51 cm) - Starting 2026
Height With Rollover Protective Structure (ROPS) 98.00 in (248.92 cm) - Starting 2026
Length (With Deck) 132.00 in (335.28 cm) - Starting 2026
Machine Weight Without The Deck 3,264.00 lbs (1,480.53 kg) - Starting 2026
Transport Width 84.00 in (213.36 cm) - Starting 2026
Tread Width 52.00 in (132.08 cm) - Starting 2026
Vehicle Weight 4,173.00 lbs (1,892.84 kg) - Starting 2026
Wheel Base 60.00 in (152.40 cm) - Starting 2026
Width With Decks Down 134.00 in (340.36 cm) - Starting 2026

Drivetrain

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Drivetrain specifications
Differential Lock Mechanical, foot activated - Starting 2026
Final Drive Planetary - Starting 2026
Four-Wheel Drive (4WD) On demand or full time - Starting 2026
Four-Wheel Drive (4WD) Type Mechanical rear-wheel drive - Starting 2026
Transaxle Tuff Torque (Kanzaki) - Starting 2026
Transaxle Type Dual range - Starting 2026
Transmission Hydrostatic - Starting 2026

Electrical

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Electrical specifications
Alternator 75.0 amp - Starting 2026
Battery Cold Crank Amps 675.0 CCA - Starting 2026
Battery Voltage 12.0 v - Starting 2026
Charging System Automotive type - Starting 2026
Starter Size 1.90 hp (1.42 kw) - Starting 2026

Engine

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Engine specifications
Air Cleaner Dual element, dry type - Starting 2026
Air Restriction Indicator Standard, progressive type - Starting 2026
Bore And Stroke 3.4x3.5 in. - Starting 2026
Compression Ratio 19:01 - Starting 2026
Cooling Liquid-cooled water centrifugal - Starting 2026
Cooling System Capacity 2.50 gal (9.46 l) - Starting 2026
Crankcase Capacity 6.1 qt - Starting 2026
Cycle 4 - Starting 2026
Cylinders 4 - Starting 2026
Displacement 127.60 cu in (2,090.99 cu cm) - Starting 2026
Engine Model 4TNV86CT-DJWM (T4) - Starting 2026
Engine Shutoff Key - Starting 2026
Horsepower (Gross Intermittent) 3,000 rpm - Starting 2026
Injection Direct - Starting 2026
Lubrication Pressurized by lobe-style pump - Starting 2026
Max Torque Per SAE J1349 (Net Continuous) 117.30 lbs ft (159.04 nm) - Starting 2026
Oil Filter Spin-on - Starting 2026
Operating Range - Maximum 3030.0 rpm - Starting 2026
Operating Range - Minimum 1400.0 rpm - Starting 2026
Operating Torque (Net Continuous @ 3000 RPM) 103.00 lbs ft (139.65 nm) - Starting 2026
Radiator Fins 10 fins per in. - Starting 2026
Radiator Location Rear mounted - Starting 2026
Rated Engine Speed 3000.0 rpm - Starting 2026
Starting Aid Engine glow plug - Starting 2026

Frame

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Frame specifications
Frame Type Welded, tubular steel - Starting 2026
Thickness 11.0 gauge - Starting 2026

Fuel Consumption

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Fuel Consumption specifications
Full Load 3.33 gph - Starting 2026
One-Half Load 1.93 gph - Starting 2026

Fuel System

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Fuel System specifications
Cold Start Device Increased timing for better cold starting - Starting 2026
Fuel Filter Replaceable, spin-on type - Starting 2026
Fuel Neck Opening 3.00 in (7.62 cm) - Starting 2026
Fuel Pump Type Mechanical - Starting 2026
Fuel Tank Capacity 22.00 gal (83.27 l) - Starting 2026
Fuel Tank Location Left side of the machine - Starting 2026
Fuel Transfer Pump Electric - Starting 2026
Fuel Type Diesel - Starting 2026
Self Bleeding System is self-bleeding because of the electric fuel transfer pump - Starting 2026
Water Separator Replaceable, 100-mesh element - Starting 2026

Hydraulic System

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Hydraulic System specifications
Hydraulic Reservoir Capacity 14.00 gal (52.99 l) - Starting 2026
Implement Relief 1600.0 psi - Starting 2026
Motor Displacement, axial piston pump, 2 cu in. - Starting 2026
Steering Relief 1087.0 psi - Starting 2026
Traction Drive Pump Displacement, axial piston pump, 3 cu in. - Starting 2026
Type Closed loop, hydrostatic - Starting 2026

Implement Lift

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Implement Lift specifications
Lift Cylinders 2.00 in (5.08 cm) - Starting 2026
Pump Gear - Starting 2026
Type Hydraulic, open center - Starting 2026

Key Specs

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Key Specs specifications
Blade Tip Speed 13000.0 fpm - Starting 2026
Drive Tires (Front) 26x12-12 - Starting 2026
Engine Model 4TNV86CT-DJWM (T4) - Starting 2026
Front Deck Caster Wheels Two, 11x4-5, flat-free - Starting 2026
Fuel Tank Capacity 22.00 gal (83.27 l) - Starting 2026
Horsepower (Gross Intermittent) 60.00 hp (44.74 kw) - Starting 2026
Speed Range - Maximum 15.00 mph (24.14 kph) - Starting 2026
Speed Range - Minimum 0.00 mph (0.00 kph) - Starting 2026
Transmission Hydrostatic - Starting 2026
Warranty 24 months - Starting 2026
Wing Deck Caster Wheels Four, 11x4-5, flat-free - Starting 2026

Mower Decks

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Mower Decks specifications
Blade Drive C-section, V-belt - Starting 2026
Center Deck Cutting Width 62.00 in (157.48 cm) - Starting 2026
Deck Circuit Series - Starting 2026
Deck Construction Fabricated steel - Starting 2026
Deck Drive Type Hydraulic, closed loop - Starting 2026
Deck Thickness 7.0 gauge - Starting 2026
Discharge Rear - Starting 2026
Energy-Absorbing Wing Decks Yes - Starting 2026
Spindle Bearings Greaseable Yes - Starting 2026
Spindles Heat treated, diameter, 1 in. - Starting 2026
Transport Lock Standard - Starting 2026
Wing Deck Cutting Width 42.00 in (106.68 cm) - Starting 2026
Wing Deck Float - Down (While Maintaining PTO Engagement) 20.0 degree (angle) - Starting 2026
Wing Deck Float - Up (While Maintaining PTO Engagement) 45.0 degree (angle) - Starting 2026

Mowing Rate

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Mowing Rate specifications
80 Percent Field Efficiency 85% field efficiency at 10 mph - Starting 2026

Operator Station

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Operator Station specifications
Armrests Yes, adjustable - Starting 2026
Safety Safety interlock and operator presence system - Starting 2026
Seat Air-ride suspension seat, adjustable, deluxe, high-backed, back angle adjustment, lumbar adjustment, standard armrests - Starting 2026
Seat Adjustment Positions Multi - Starting 2026

Rollover Protective Structure (ROPS)

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Rollover Protective Structure (ROPS) specifications
Type Standard two-post folding ROPS meets ISO21299 standard - Starting 2026

Sound Level (Without Cab)

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Sound Level (Without Cab) specifications
With Deck 94.0 dBA - Starting 2026
Without Deck 89.0 dBA - Starting 2026

Steering

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Steering specifications
Tilt Steering Wheel Standard - Starting 2026
Turning Radius 39.00 in (99.06 cm) - Starting 2026
Turns Lock-To-Lock 2.5 - Starting 2026
Type Power, hydrostatic - Starting 2026

Tires

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Tires specifications
Drive Tires (Front) 26x12-12 - Starting 2026
Drive Tires (Front) - Pressure Front: 206.8 kPa / Rear: 193.1 kPa - Starting 2026
Ply Rating 6 PR (both) - Starting 2026
Steering Tires (Rear) 18x9.5-8 - Starting 2026
Tread Multi-trac - Starting 2026

Travel Speed

John Deere 1600 Turbo TerrainCut™ (Two-Post ROPS) Mower Travel Speed specifications
High Forward Speed 15.00 mph (24.14 kph) - Starting 2026
High Reverse Speed 7.50 mph (12.07 kph) - Starting 2026
Low Forward Speed 9.00 mph (14.48 kph) - Starting 2026
Low Reverse Speed 4.50 mph (7.24 kph) - Starting 2026
Speed Range - Maximum 15.00 mph (24.14 kph) - Starting 2026
Speed Range - Minimum 0.00 mph (0.00 kph) - Starting 2026
×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.