John Deere 2550 PrecisionCut™ Mower Specs

Category: Mowers ➔
Manufacturer: John Deere ➔
Model: 2550 PrecisionCut™ ➔

Additional Information

John Deere 2550 PrecisionCut™ Mower Additional Information specifications
Date Collected	2019-10-31T00:00:00 - Starting 2026

Certification

John Deere 2550 PrecisionCut™ Mower Certification specifications
Engine	EPA Tier 2, Interim Tier 4 - Starting 2026
Number	ANSI B71.4-2004 - Starting 2026
ROPS	2-Post SAE J21294 Roll Over Protection Structure with seat belts meets ISO 21299 standards - Starting 2026

Electrical System

John Deere 2550 PrecisionCut™ Mower Electrical System specifications
Alternator Capacity	20.0 amp - Starting 2026
Battery Type	BCI group 40 maintenance-free: 12 V V - Starting 2026
Charging System	Flywheel, alternator - Starting 2026
Starter	Electric (solenoid shift) - Starting 2026

Engine

John Deere 2550 PrecisionCut™ Mower Engine specifications
Air Cleaner	Semi-cyclone, dry-type, dual stage - Starting 2026
Cooling	Liquid - Starting 2026
Displacement	60.60 cu in (993.06 cu cm) - Starting 2026
Engine Horsepower	19.60 hp (14.62 kw) - Starting 2026
Engine Oil Capacity	2.3 qt - Starting 2026
Number Of Cylinders	3 - Starting 2026
Oil Filter	Full-flow filter - Starting 2026
Pressurized Lubrication System	Standard - Starting 2026
Type	IDI Diesel - Starting 2026

Instrumentation

John Deere 2550 PrecisionCut™ Mower Instrumentation specifications
Alternator	LED Warning Light - Starting 2026
Engine Coolant Temperature	LED Warning Light - Starting 2026
Engine Oil Pressure	LED Warning Light - Starting 2026
Hourmeter	Digital - Starting 2026
Hydraulic Oil Temperature	LED Warning Light - Starting 2026

Key Specs

John Deere 2550 PrecisionCut™ Mower Key Specs specifications
Cutting Unit Size	22.00 in (55.88 cm) - Starting 2026
Cutting Width	62.00 in (157.48 cm) - Starting 2026
Displacement	60.60 cu in (993.06 cu cm) - Starting 2026
Ground Drive, Reel Drive - Traction Drive	Hydrostatic, 2-pedal control - Starting 2026
Mowing Speed	4.40 mph (7.08 kph) - Starting 2026
Number Of Blades	7 or 11 - Starting 2026
Number Of Cylinders	3 - Starting 2026
Operator Ear - Full Engine RPM	82.0 dBA - Starting 2026

Mower

John Deere 2550 PrecisionCut™ Mower Mower specifications
Backlapping	Standard on-board micro-backlapping and reel speed control - Starting 2026
Bedknife Adjustment	Bedknife-to-reel - Starting 2026
Clip Frequency	For 14 blade: 0.54 mm/km/h (0.034 in./mph); With 11-blade reel: 0.69 mm/km/h (0.044 in./mph); With 7-blade reel: 1.08 mm/km/h (0.069 in./mph) - Starting 2026
Cutting Unit Size	22.00 in (55.88 cm) - Starting 2026
Front Rollers	2.00 in (5.08 cm) - Starting 2026
Height-Of-Cut	2-19 mm (0.078-0.75 in.); With front roller: 51 mm (2 in.) or 16-32 mm (0.63-1.25 in.); With front roller: 76 mm (3 in.) - Starting 2026
Mower Lift	(1) cylinder for front two units; (1) cylinder for rear unit - Starting 2026
Number	3 - Offset design, Quick Adjust QA5 floating - Starting 2026
Number Of Blades	7 or 11 - Starting 2026
Reel Diameter	5.00 in (12.70 cm) - Starting 2026

Operator Controls

John Deere 2550 PrecisionCut™ Mower Operator Controls specifications
Glow Plug Switch And Indicator Light	Automatic, on instrument panel - Starting 2026
Hydrostatic Speed - Forward	Right foot - Starting 2026
Hydrostatic Speed - Reverse	Right foot - Starting 2026
Ignition	Key start and shutoff - Starting 2026
Park Brake	Right foot - Starting 2026
Reel Lift	Right-hand operated (optional foot-lift controls) - Starting 2026
Steering	Hydrostatic, adjustable steering column - Starting 2026
Throttle	Right hand - Starting 2026

Sound Levels At Operator Ear

John Deere 2550 PrecisionCut™ Mower Sound Levels At Operator Ear specifications
Operator Ear - Full Engine RPM	82.0 dBA - Starting 2026

Vehicle Specifications

John Deere 2550 PrecisionCut™ Mower Vehicle Specifications specifications
Brakes	Single-pedal, 2-wheel disc brakes - Starting 2026
Brakes - Type	Dual - Starting 2026
Filtration	10-micron - Starting 2026
Fuel Tank Capacity	7.80 gal (29.52 l) - Starting 2026
Ground Clearance With Catcher	4.00 in (10.16 cm) - Starting 2026
Ground Drive, Reel Drive	Drive wheels: front - Starting 2026
Ground Drive, Reel Drive - Reel Drive	Hydraulic - Starting 2026
Ground Drive, Reel Drive - Traction Drive	Hydrostatic, 2-pedal control - Starting 2026
Hydrostatic Capacity (Total)	7.60 gal (28.77 l) - Starting 2026
Hydrostatic Reservoir Capacity (Only)	5.40 gal (20.44 l) - Starting 2026
Mowing Speed	4.40 mph (7.08 kph) - Starting 2026
Muffler	Horizontal discharge below frame - Starting 2026
Reel Control	Electro-hydraulic, one valve reel on-off and one valve raise-lower - Starting 2026
Reverse Speed	3.00 mph (4.83 kph) - Starting 2026
Transport Speed	8.00 mph (12.87 kph) - Starting 2026
Wheels And Tires - Front	18x10.5-10, 2-ply, smooth (low compaction); 20x10-10, 2-ply or 4-ply, smooth; or 20x10-10, 2-ply, turf - Starting 2026
Wheels And Tires - Rear	18x10.5-10, 2-ply, smooth (low compaction); 20x10-10, 2-ply or 4-ply, smooth; or 20x10-10, 2-ply, turf - Starting 2026

Weights And Dimensions

John Deere 2550 PrecisionCut™ Mower Weights And Dimensions specifications
Cutting Width	62.00 in (157.48 cm) - Starting 2026
Tread Width	40.00 in (101.60 cm) - Starting 2026
Turning Radius Uncut Circle	18.00 in (45.72 cm) - Starting 2026
Weight (Full Fluids, No Operator Or Fuel)	1,405.00 lbs (637.30 kg) - Starting 2026
Wheelbase	51.00 in (129.54 cm) - Starting 2026

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon