John Deere 2700 E-Cut™ Hybrid Mower Specs

Category: Mowers ➔
Manufacturer: John Deere ➔
Model: 2700 E-Cut™ Hybrid ➔

Additional Information

John Deere 2700 E-Cut™ Hybrid Mower Additional Information specifications
Date Collected	2019-09-30T00:00:00 - Starting 2026

Certification

John Deere 2700 E-Cut™ Hybrid Mower Certification specifications
Engine	Meets Environmental Protection Agency (EPA) requirements - Starting 2026
Number	ANSI B71.4-2017 - Starting 2026
ROPS	Two-post SAE J21294 rollover protective structure with seat belts meets ISO 21299 standards - Starting 2026

Electrical And Safety System

John Deere 2700 E-Cut™ Hybrid Mower Electrical And Safety System specifications
Diagnostics	On-board diagnostics with TechControl display - Starting 2026
Safety Interlocks	Operator presence switch (in seat), neutral, mow/transport switch, park brake set switch - Starting 2026

Electrical System

John Deere 2700 E-Cut™ Hybrid Mower Electrical System specifications
Alternator Capacity	50.0 amp - Starting 2026
Battery Type	BCI group 51 maintenance free - 12 V V - Starting 2026
Charging System	Flywheel, alternator - Starting 2026
Ignition	CDI - Starting 2026
Starter	Electric (solenoid shift) - Starting 2026

Engine

John Deere 2700 E-Cut™ Hybrid Mower Engine specifications
Air Cleaner	Semi cyclone, dry type, dual stage, 1/4 turn - Starting 2026
Cooling	Air - Starting 2026
Displacement	42.40 cu in (694.81 cu cm) - Starting 2026
Engine Horsepower	19.00 hp (14.17 kw) - Starting 2026
Engine Oil Capacity	2.0 qt - Starting 2026
Number Of Cylinders	2 - Starting 2026
Oil Filter	Full-flow filter - Starting 2026
Pressurized Lubrication System	Standard - Starting 2026
Type	Kohler® ECH630 EFI gas with electronic throttle body - Starting 2026

Instrumentation

John Deere 2700 E-Cut™ Hybrid Mower Instrumentation specifications
Alternator	Warning icon and diagnostic trouble code on TechControl display - Starting 2026
Engine Coolant Temperature	Warning icon and diagnostic trouble code on TechControl display - Starting 2026
Engine Oil Pressure	Warning icon and diagnostic trouble code on TechControl display - Starting 2026
Hourmeter	Digital on main TechControl operating screen - Starting 2026
Hydraulic Oil Temperature	Warning icon and diagnostic trouble code on TechControl display - Starting 2026

Key Specs

John Deere 2700 E-Cut™ Hybrid Mower Key Specs specifications
Cutting Unit Size	22.00 in (55.88 cm) - Starting 2026
Cutting Width	62.00 in (157.48 cm) - Starting 2026
Displacement	42.40 cu in (694.81 cu cm) - Starting 2026
Ground Drive, Reel Drive - Traction Drive	eHydro™ - electronically controlled hydraulic traction pump; dual pedal - Starting 2026
Mowing Speed	6.00 mph (9.66 kph) - Starting 2026
Number Of Blades	7, 11 or 14 - Starting 2026
Number Of Cylinders	2 - Starting 2026

Mower

John Deere 2700 E-Cut™ Hybrid Mower Mower specifications
Backlapping	Engagement/disengagement and rpm controlled through passcode-protected Tech Control display - Starting 2026
Bedknife Adjustment	Bedknife-to-reel - Starting 2026
Clip Frequency	14-blade: 0.54 mm/km/h (0.034 in./mph); 11-blade: 0.69 mm/km/h (0.044 in./mph); 7-blade: 1.08 mm/km/h 0.069 in./mph; Adjustable in TechControl display - Starting 2026
Cutting Unit Size	22.00 in (55.88 cm) - Starting 2026
Front Rollers	2.00 in (5.08 cm) - Starting 2026
Height-Of-Cut	With 51 mm (2-in.) front roller: 2-36 mm (0.079-1.42 in.); With 76.2 mm (3-in.) front roller: 4-46 mm (0.16-1.81 in.) - Starting 2026
Mower Lift	Three independent hydraulic cylinders; Lift rate, lower rate, and front-to-rear timing adjustable via TechControl display - Starting 2026
Number	3; QA5 floating, standard - Starting 2026
Number Of Blades	7, 11 or 14 - Starting 2026
Reel Diameter	5.00 in (12.70 cm) - Starting 2026

Operator Controls

John Deere 2700 E-Cut™ Hybrid Mower Operator Controls specifications
Hydrostatic Speed - Forward	Electronic, right foot operated, located to left of reverse pedal - Starting 2026
Hydrostatic Speed - Reverse	Electronic, right foot operated, located to right of forward pedal - Starting 2026
Ignition	Key start and shutoff - Starting 2026
Park Brake	Mechanical hand lever to left of seat - Starting 2026
Reel Drive	Yellow two-position switch for PTO on CommandARM™ console - Starting 2026
Reel Lift	Right-hand joystick control for lift/lower; Three independent hydraulic cylinders - Starting 2026
Steering	Hydraulic, gear pump with double-acting steering cylinder; No-tool adjustable column and tilt wheel - Starting 2026
Throttle	Electronically controlled; AutoPedal™ foot controls in transport; PTO rpm control through TechControl display; Three modes: Max, Eco, Min - Starting 2026

Sound Levels At Operator Ear

John Deere 2700 E-Cut™ Hybrid Mower Sound Levels At Operator Ear specifications
Full Engine RPM - With GTC And Power Brush Attachments	82.0 dBA - Starting 2026
Reduced Engine RPM (2250) - With GTC And Power Brush Attachments	78.0 dBA - Starting 2026

Vehicle Specifications

John Deere 2700 E-Cut™ Hybrid Mower Vehicle Specifications specifications
Brakes - Type	Hand lever operated, two-wheel disc brakes - Starting 2026
Fuel Tank Capacity	5.30 gal (20.06 l) - Starting 2026
Ground Clearance With Catcher	4.50 in (11.43 cm) - Starting 2026
Ground Drive, Reel Drive - Reel Drive	Electric - Starting 2026
Ground Drive, Reel Drive - Reel Power Source	56.0 v - Starting 2026
Ground Drive, Reel Drive - Traction Drive	eHydro™ - electronically controlled hydraulic traction pump; dual pedal - Starting 2026
Hydraulic Filtration	8 micron - Starting 2026
Hydrostatic Capacity (Total)	5.30 gal (20.06 l) - Starting 2026
Hydrostatic Reservoir Capacity (Only)	4.20 gal (15.90 l) - Starting 2026
Mowing Speed	6.00 mph (9.66 kph) - Starting 2026
Muffler	Three chamber, round - Starting 2026
Reel Control	Independent electronic reel controllers - Starting 2026
Reverse Speed	4.00 mph (6.44 kph) - Starting 2026
Transport Speed	11.00 mph (17.70 kph) - Starting 2026
Wheels And Tires - Front	20x10-10 (smooth, smooth balloon, or turf tread) - Starting 2026
Wheels And Tires - Rear	20x10-10 (smooth, smooth balloon, or turf tread) - Starting 2026

Weights And Dimensions

John Deere 2700 E-Cut™ Hybrid Mower Weights And Dimensions specifications
Cutting Width	62.00 in (157.48 cm) - Starting 2026
Tread Width	61.90 in (157.23 cm) - Starting 2026
Turning Radius Uncut Circle	18.00 in (45.72 cm) - Starting 2026
Weight (Full Fluids, No Operator Or Fuel)	1,305.00 lbs (591.94 kg) - Starting 2026
Wheelbase	51.20 in (130.05 cm) - Starting 2026

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon