John Deere 2700 PrecisionCut™ Mower Specs

Additional Information

John Deere 2700 PrecisionCut™ Mower Additional Information specifications
Date Collected	2019-09-30T00:00:00 — Starting 2026 Model Year

John Deere 2700 PrecisionCut™ Mower Certification specifications
Engine	Meets Environmental Protection Agency (EPA) requirements — Starting 2026 Model Year
Number	ANSI B71.4-2017 — Starting 2026 Model Year
ROPS	Two-post SAE J21294 rollover protective structure with seat belts meets ISO 21299 standards — Starting 2026 Model Year

John Deere 2700 PrecisionCut™ Mower Cutting Units specifications
Backlapping	Engagement/disengagement and rpm controlled through passcode-protected TechControl display — Starting 2026 Model Year
Bedknife Adjustment	Bedknife-to-reel — Starting 2026 Model Year
Clip Frequency	0.034 in/mph — Starting 2026 Model Year
Cutting Unit Size	22.00 in (55.88 cm) — Starting 2026 Model Year
Front Rollers	2.00 in (5.08 cm) — Starting 2026 Model Year
Height Of Cut - Maximum	1.81 in (4.60 cm) — Starting 2026 Model Year
Height Of Cut - Minimum	0.08 in (0.20 cm) — Starting 2026 Model Year
Mower Lift	Three independent hydraulic cylinders; Adjustable via TechControl display — Starting 2026 Model Year
Number	3 — Starting 2026 Model Year
Number Of Blades	7 — Starting 2026 Model Year
Reel Diameter	5.00 in (12.70 cm) — Starting 2026 Model Year
Reel Speed	Maximum: 2200 rpm; Frequency of clip mode: Automatically controls reel speed based on pedal position input; Fixed speed mode: Fixed reel speed; Reel off mode: Does not allow PTO to engage for non-powered implements; Modes selectable via passcode-protected TechControl display — Starting 2026 Model Year

John Deere 2700 PrecisionCut™ Mower Electrical And Safety System specifications
Diagnostics	On-board diagnostics with TechControl display — Starting 2026 Model Year
Safety Interlocks	Operator presence switch (in seat), neutral, mow/transport switch, park brake set switch — Starting 2026 Model Year

John Deere 2700 PrecisionCut™ Mower Electrical System specifications
Alternator Capacity	50.0 amp — Starting 2026 Model Year
Battery Type	BCI group 51 maintenance-free: 12 V V — Starting 2026 Model Year
Charging System	Flywheel, alternator — Starting 2026 Model Year
Ignition	CDI — Starting 2026 Model Year
Starter	Electric (solenoid shift) V — Starting 2026 Model Year

John Deere 2700 PrecisionCut™ Mower Engine specifications
Air Cleaner	Semi cyclone, dry type, dual stage, 1/4 turn — Starting 2026 Model Year
Cooling	Air — Starting 2026 Model Year
Cooling - Displacement	42.40 cu in (694.81 cu cm) — Starting 2026 Model Year
Cooling - Engine Oil	2.0 qt — Starting 2026 Model Year
Cooling - Number Of Cylinders	2 — Starting 2026 Model Year
Cooling - Oil Filter	Full-flow filter — Starting 2026 Model Year
Cooling - Pressurized Lubrication System	Standard — Starting 2026 Model Year
Horsepower - Gas	19.00 hp (14.17 kw) — Starting 2026 Model Year
Type - Gas Model	Kohler® ECH630 EFI gas with electronic throttle body — Starting 2026 Model Year

John Deere 2700 PrecisionCut™ Mower Instrumentation specifications
Alternator	Warning icon and diagnostic trouble code on TechControl display — Starting 2026 Model Year
Engine Coolant Temperature	Warning icon and diagnostic trouble code on TechControl display — Starting 2026 Model Year
Engine Oil Pressure	Warning icon and diagnostic trouble code on TechControl display — Starting 2026 Model Year
Hourmeter	Digital on main TechControl operating screen — Starting 2026 Model Year
Hydraulic Oil Temperature	Warning icon and diagnostic trouble code on TechControl display — Starting 2026 Model Year

John Deere 2700 PrecisionCut™ Mower Key Specs specifications
Clip Frequency	0.034 in/mph — Starting 2026 Model Year
Cooling - Displacement	42.40 cu in (694.81 cu cm) — Starting 2026 Model Year
Cooling - Number Of Cylinders	2 — Starting 2026 Model Year
Cutting Unit Size	22.00 in (55.88 cm) — Starting 2026 Model Year
Cutting Width	62.00 in (157.48 cm) — Starting 2026 Model Year
Ground Drive - Traction Drive	eHydro™ - electronically controlled hydraulic traction pump — Starting 2026 Model Year
Height Of Cut - Maximum	1.81 in (4.60 cm) — Starting 2026 Model Year
Height Of Cut - Minimum	0.08 in (0.20 cm) — Starting 2026 Model Year
Mowing Speed	6.00 mph (9.66 kph) — Starting 2026 Model Year
Number Of Blades	7 — Starting 2026 Model Year
Operator Ear	83.0 dBA — Starting 2026 Model Year

John Deere 2700 PrecisionCut™ Mower Operator Controls specifications
Hydrostatic Speed Control - Forward	Electronic, right foot operated, located to left of reverse pedal — Starting 2026 Model Year
Hydrostatic Speed Control - Reverse	Electronic, right foot operated, located to right of forward pedal — Starting 2026 Model Year
Ignition	Key start and shutoff — Starting 2026 Model Year
Park Brake	Mechanical hand lever to left of seat — Starting 2026 Model Year
Reel Drive And Reel Lift	Right-hand joystick control for lift/lower; Yellow two-position switch for PTO; Three independent hydraulic cylinders; Lift rate, lower rate, and front-to-rear timing adjustable via passcode-protected TechControl display — Starting 2026 Model Year
Steering	Hydraulic, gear pump with double-acting steering cylinder; No-tool adjustable column and tilt wheel — Starting 2026 Model Year
Throttle	Electronically controlled, AutoPedal™ foot controls in transport; PTO rpm control through TechControl display; Three modes: Max, Eco, Min — Starting 2026 Model Year

John Deere 2700 PrecisionCut™ Mower Sound Levels specifications
Measuring Standard	ISO 11201 — Starting 2026 Model Year
Operator Ear	83.0 dBA — Starting 2026 Model Year

John Deere 2700 PrecisionCut™ Mower Vehicle Specifications specifications
Brakes	Hand lever operated, two-wheel disc brakes — Starting 2026 Model Year
Filtration	8 micron — Starting 2026 Model Year
Fuel Tank Capacity	5.30 gal (20.06 l) — Starting 2026 Model Year
Ground Clearance With Catcher	4.50 in (11.43 cm) — Starting 2026 Model Year
Ground Drive - Drive Wheels	Front two-wheel drive (2WD), Optional: GRIP all-wheel drive (AWD) — Starting 2026 Model Year
Ground Drive - Traction Drive	eHydro™ - electronically controlled hydraulic traction pump — Starting 2026 Model Year
Ground Drive, Reel Drive	Hydraulic — Starting 2026 Model Year
Hydraulic Reservoir Capacity (Only)	4.20 gal (15.90 l) — Starting 2026 Model Year
Hydrostatic Drive System Capacity	5.80 gal (21.95 l) — Starting 2026 Model Year
Mowing Speed	6.00 mph (9.66 kph) — Starting 2026 Model Year
Muffler	Horizontal discharge below frame — Starting 2026 Model Year
Pump	Three-section gear — Starting 2026 Model Year
Reel Control Valves	Proportional hydraulic mow valve, electronically controlled — Starting 2026 Model Year
Reverse Speed	4.00 mph (6.44 kph) — Starting 2026 Model Year
Transport Speed	11.00 mph (17.70 kph) — Starting 2026 Model Year
Wheels And Tires - Front/Rear	20x10-10 (smooth, smooth balloon, or turf tread) — Starting 2026 Model Year

John Deere 2700 PrecisionCut™ Mower Weights And Dimensions specifications
Cutting Width	62.00 in (157.48 cm) — Starting 2026 Model Year
Height	77.50 in (196.85 cm) — Starting 2026 Model Year
Tread Width	61.90 in (157.23 cm) — Starting 2026 Model Year
Turning Radius, Uncut Circle	18.00 in (45.72 cm) — Starting 2026 Model Year
Weight (Full Fluids, No Operator Or Fuel)	1,217.00 lbs (552.02 kg) — Starting 2026 Model Year
Wheelbase	51.20 in (130.05 cm) — Starting 2026 Model Year