John Deere 7200A PrecisionCut™ Mower Specs

Category: Mowers ➔
Manufacturer: John Deere ➔
Model: 7200A PrecisionCut™ ➔

Certification

John Deere 7200A PrecisionCut™ Mower Certification specifications
Type	ANSI B71.4-2012, CE - Starting 2026

Controls

John Deere 7200A PrecisionCut™ Mower Controls specifications
Forward/Reverse	Two-pedal - Starting 2026
Ignition	Key start - Starting 2026
Mower Lift	One-touch single handle - Starting 2026
Operator Display	TechControl display: Located on command arm; displays machine warnings, onboard electrical diagnostics; service timers on large, easy-to-read screen; quick on-the-go settings for mow and transport speed; turn speed; LoadMatch™ and ON/OFF cruise control use selection; all settings are passcode protected - Starting 2026
Parking Brake	Electric switch on command arm for internal wet disk brakes - Starting 2026
PTO	Electric switch on command arm - Starting 2026
Seat	Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment - Starting 2026
Storage	Cup holder; two-way radio; large operator storage located on left-hand side of operator station - Starting 2026
Throttle	Hand throttle - Starting 2026
Tilt Steering	Left foot operated for easy adjustment - Starting 2026
Work Lights	Switch on command arm - Starting 2026

Cutting Units

John Deere 7200A PrecisionCut™ Mower Cutting Units specifications
Backlapping	Standard - Starting 2026
Bedknife Adjustment	Reel-to-bedknife - Starting 2026
Clip Frequency	Eight Blade: 1.99 mm/km/h (0.126 in./mph); Five Blade: 3.17 mm/km/h 90.201 in./mph) - Starting 2026
Construction	Five or eight blades - Starting 2026
Cutting Unit Size	Quick-Adjust 7 (QA7):66 cm (26 in.) or QA7: 76 cm (30 in.) - Starting 2026
Cutting Width	72.00 in (182.88 cm) - Starting 2026
Frequency of clip (FOC Reels) OR Blade tip speed (decks)	Eight Blade: 1.99 mm/km/h (0.126 in./mph); Five Blade: 3.17 mm/km/h (0.201 in./mph) - Starting 2026
Number	3 - Starting 2026
Reel Diameter	7.00 in (17.78 cm) - Starting 2026
Rollers	Optional: grooved, solid, or spiral: 7.5 cm (3 in.) - Starting 2026

Dimensions

John Deere 7200A PrecisionCut™ Mower Dimensions specifications
Ground Speed - Mowing	6.00 mph (9.66 kph) - Starting 2026
Ground Speed - Reverse	5.00 mph (8.05 kph) - Starting 2026
Ground Speed - Transport	9.00 mph (14.48 kph) - Starting 2026
Height With ROPS	84.00 in (213.36 cm) - Starting 2026
Length	133.00 in (337.82 cm) - Starting 2026
Wheelbase	62.00 in (157.48 cm) - Starting 2026

Engine

John Deere 7200A PrecisionCut™ Mower Engine specifications
Air Cleaner	Two-stage dry element - Starting 2026
Compliant Emission Regulation	United States and Canada Tier 4 - Starting 2026
Cooling System	Liquid centrifugal pump; forward machine location for optimum cooling - Starting 2026
Cylinders	3 - Starting 2026
Displacement	77.32 cu in (1,267.05 cu cm) - Starting 2026
Engine Type	Indirect inject diesel - Starting 2026
Fuel	Diesel - Starting 2026
Maximum Engine Power	2600.0 rpm - Starting 2026

Fuel Economy

John Deere 7200A PrecisionCut™ Mower Fuel Economy specifications
Actual Fuel Usage Will Vary Depending On Course Conditions, Operation, Turf And Fuel Quality	25% load: 1.74 L/hr (0.46 gph); 40% load 2.65 L/hr (0.70 gph); 50% load: 3.03 L/hr (0.80 gph) - Starting 2026

Key Specs

John Deere 7200A PrecisionCut™ Mower Key Specs specifications
Clip Frequency	Eight Blade: 1.99 mm/km/h (0.126 in./mph); Five Blade: 3.17 mm/km/h 90.201 in./mph) - Starting 2026
Cutting Unit Size	26.00 in (66.04 cm) - Starting 2026
Cutting Width	72.00 in (182.88 cm) - Starting 2026
Drive Pump	Gear - Starting 2026
Frequency of clip (FOC Reels) OR Blade tip speed (decks)	Eight Blade: 1.99 mm/km/h (0.126 in./mph); Five Blade: 3.17 mm/km/h (0.201 in./mph) - Starting 2026
Ground Pressure	14 psi - Starting 2026
Ground Speed - Mowing	6.00 mph (9.66 kph) - Starting 2026
Maximum Engine Power	2600.0 rpm - Starting 2026
Operator Display	TechControl display: Located on command arm; displays machine warnings, onboard electrical diagnostics; service timers on large, easy-to-read screen; quick on-the-go settings for mow and transport speed; turn speed; LoadMatch™ and ON/OFF cruise control use selection; all settings are passcode protected - Starting 2026
Reel Diameter	7.00 in (17.78 cm) - Starting 2026
Throttle	Hand throttle - Starting 2026
Wheelbase	62.00 in (157.48 cm) - Starting 2026

Operating Weight

John Deere 7200A PrecisionCut™ Mower Operating Weight specifications
Cutting Units Lowered	1039 kg (2290 lb) - Starting 2026

Sound Levels

John Deere 7200A PrecisionCut™ Mower Sound Levels specifications
Attachments Installed	Fairway tender conditioners (FTCs), reels engaged - Starting 2026
Measuring Standard	ISO 11201, EN ISO5395-1 - Starting 2026
Operator Ear Full Engine RPM	87.0 dBA - Starting 2026

Vehicle

John Deere 7200A PrecisionCut™ Mower Vehicle specifications
Brakes	Internal hydraulic wet disk brakes with dynamic braking through closed loop hydrostatic system - Starting 2026
Drive Pump	Gear - Starting 2026
Front Drive Tires	24 x 12 - 12 turf trac - Starting 2026
Fuel Tank Capacity	12.00 gal (45.42 l) - Starting 2026
Ground Pressure	14 psi - Starting 2026
Hydraulic System Capacity	12.00 gal (45.42 l) - Starting 2026
ROPS	Standard; meets ISO 21299 Standard - Starting 2026
Steering	Tilt; Hydraulic power with double acting steering cylinder - Starting 2026
Steering Tires	24 x 12 - 12 multi trac - Starting 2026

Warranty

John Deere 7200A PrecisionCut™ Mower Warranty specifications
Type	Two-year limited - Starting 2026

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon