Create a CEG Account  /  CEG Login
☰
Parts
Buyer's Guides
Digital Issues
Videos


John Deere 8900A PrecisionCut™ 114-in. Mower Specs

Certification

John Deere 8900A PrecisionCut™ 114-in. Mower Certification specifications
Type ANSI B71.4-2012 - Starting 2026

Controls

John Deere 8900A PrecisionCut™ 114-in. Mower Controls specifications
Forward/Reverse 2-pedal - Starting 2026
Ignition Key start - Starting 2026
Mower Lift One-touch single handle - Starting 2026
Operator Display TechControl Display: Located on CommandARM; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; LoadMatch™ and ON/OFF Cruise Control Use selection: all settings are passcode protected - Starting 2026
Parking Brake Electric switch on CommandARM for internal wet disk brakes - Starting 2026
PTO Electric switch on CommandARM - Starting 2026
Seat Air Ride suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment - Starting 2026
Storage Cup holder; two-way radio located in CommandARM; large operator storage located on left hand side of operator station - Starting 2026
Throttle Automatic controls with AutoPedal foot controls; manual control through TechControl display - Starting 2026
Tilt Steering Left foot operated for easy adjustment - Starting 2026
Work Lights Standard 3 front work lights - Starting 2026

Cutting Units

John Deere 8900A PrecisionCut™ 114-in. Mower Cutting Units specifications
Backlapping Standard; pressure sensing flow compensating backlap valve; manual reel speed adjustment - Starting 2026
Bedknife Adjustment Reel to bedknife - Starting 2026
Cutting Unit Size Quick Adjust QA7: 66 or 76 cm (26 or 30 in.) - Starting 2026
Cutting Width 114.00 in (289.56 cm) - Starting 2026
Frequency of clip (FOC Reels) OR Blade tip speed (decks) 10 Blade: 1.06 mm/km/h (0.067 in./mph); 8 Blade: 1.33 mm/km/h (0.084 in./mph) - Starting 2026
Height-Of-Cut QA7: 6.3-50.8 mm (0.25-2.0 in.) - Starting 2026
Number 5 - Starting 2026
Reel Diameter 7.00 in (17.78 cm) - Starting 2026
Rollers Front and rear: 76.2 mm (3 in.) - Starting 2026

Dimensions

John Deere 8900A PrecisionCut™ 114-in. Mower Dimensions specifications
Ground Speed - Mowing 8.00 mph (12.87 kph) - Starting 2026
Ground Speed - Reverse 6.00 mph (9.66 kph) - Starting 2026
Ground Speed - Transport 12.00 mph (19.31 kph) - Starting 2026
Height With ROPS 87.00 in (220.98 cm) - Starting 2026
Length 111.00 in (281.94 cm) - Starting 2026
Mowing Position Width QA7 (66 cm [26 in.]): 3275 mm (129 in.); QA7 (76 cm [30 in.]): 3695 mm (145 in.) - Starting 2026
Wheelbase 62.40 in (158.50 cm) - Starting 2026

Engine

John Deere 8900A PrecisionCut™ 114-in. Mower Engine specifications
Air Cleaner 2-stage dry element - Starting 2026
Compliant Emission Regulation Tier 4 - Starting 2026
Cooling System Liquid centrifugal pump; forward machine location for optimum cooling - Starting 2026
Cylinders 4 - Starting 2026
Displacement 127.60 cu in (2,090.99 cu cm) - Starting 2026
Fuel Diesel up to B20 compliant - Starting 2026
Maximum Engine Power 55.10 hp (41.09 kw) - Starting 2026
Type Direct inject turbocharged diesel - Starting 2026

Fuel Economy

John Deere 8900A PrecisionCut™ 114-in. Mower Fuel Economy specifications
Actual Fuel Usage Will Vary Depending On Course Conditions, Operation, Turf And Fuel Quality 25% load: 3.63 L/hr (0.96 gph); 40% load: 5.64 L/hr (1.49 gph); 50% load: 6.85 L/hr (1.81 gph) - Starting 2026

Key Specs

John Deere 8900A PrecisionCut™ 114-in. Mower Key Specs specifications
Cutting Width 114.00 in (289.56 cm) - Starting 2026
Drive Pump Tandem gear pump - Starting 2026
Frequency of clip (FOC Reels) OR Blade tip speed (decks) 10 Blade: 1.06 mm/km/h (0.067 in./mph); 8 Blade: 1.33 mm/km/h (0.084 in./mph) - Starting 2026
Ground Pressure 12 psi - Starting 2026
Ground Speed - Mowing 8.00 mph (12.87 kph) - Starting 2026
Height-Of-Cut QA7: 6.3-50.8 mm (0.25-2.0 in.) - Starting 2026
Maximum Engine Power 2800.0 rpm - Starting 2026
Operator Display TechControl Display: Located on CommandARM; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; LoadMatch™ and ON/OFF Cruise Control Use selection: all settings are passcode protected - Starting 2026
Reel Diameter 7.00 in (17.78 cm) - Starting 2026
Throttle Automatic controls with AutoPedal foot controls; manual control through TechControl display - Starting 2026
Wheelbase 62.40 in (158.50 cm) - Starting 2026

Operating Weight

John Deere 8900A PrecisionCut™ 114-in. Mower Operating Weight specifications
Cutting Units Lowered Full fluids, no operator, 66-cm (26-in.) Quick Adjust QA7 cutting units lowered: 1239 kg (2725 lb); Full fluids, no operator, 76-cm (30-in.) Quick Adjust QA7cutting units lowered: 1270 kg (2795 lb) - Starting 2026

Sound Levels

John Deere 8900A PrecisionCut™ 114-in. Mower Sound Levels specifications
Attachments Installed FTCs, reels engaged - Starting 2026
Measuring Standard ISO 11201 - Starting 2026

Vehicle

John Deere 8900A PrecisionCut™ 114-in. Mower Vehicle specifications
Brakes Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system - Starting 2026
Cutting Units Drive Hydraulic motor to each cutting unit - Starting 2026
Drive Pump Tandem gear pump - Starting 2026
Front Drive Tires 26.5x14-12 turf - Starting 2026
Fuel Tank Capacity 16.00 gal (60.56 l) - Starting 2026
Ground Pressure 12 psi - Starting 2026
Hydraulic System Capacity 10.00 gal (37.85 l) - Starting 2026
ROPS Standard; meets ISO 21299 Standard - Starting 2026
Steering Hydraulic power with double acting steering cylinder - Starting 2026
Steering Tires 20x12X10-8 turf - Starting 2026

Warranty

John Deere 8900A PrecisionCut™ 114-in. Mower Warranty specifications
Type Two-year limited - Starting 2026
×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.