John Deere 9009A TerrainCut™ Mower Specs

Certification

John Deere 9009A TerrainCut™ Mower Certification specifications
Type	ANSI B71.4-2012.; CE — Starting 2026 Model Year

John Deere 9009A TerrainCut™ Mower Controls specifications
Forward/Reverse	2-pedal — Starting 2026 Model Year
Ignition	Key Switch on Command Arm — Starting 2026 Model Year
Mower Lift	One-touch single handle — Starting 2026 Model Year
Operator Display	TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy-to-read screen; quick on the go settings for mow and transport speed; Turn Speed; LoadMatch and ON/OFF Weight Transfer and Cruise Control Use selection; Cutting unit drop rate adjustment; All settings are passcode protected — Starting 2026 Model Year
Parking Brake	Electric Switch on Command Arm for Internal Wet Disk Brakes — Starting 2026 Model Year
PTO	Electric Switch on Command Arm for quick and easy transition from mow to transport — Starting 2026 Model Year
Seat	Air Ride Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment — Starting 2026 Model Year
Storage	Operator storage located on left side for easy access from operator seat — Starting 2026 Model Year
Throttle	No throttle lever; Automatic controls with AutoPedal foot controls; manual control through TechControl display — Starting 2026 Model Year
Tilt Steering	Left Foot operated for easy adjustment — Starting 2026 Model Year
Work Lights	3 standard work lights in front — Starting 2026 Model Year

John Deere 9009A TerrainCut™ Mower Cutting Units specifications
Construction	Single sheet 10-gauge steel stamped deck with front skid plate; 1.5 in. (38 mm) tall and 0.5 in. (12.7 mm) thick steel stock welded to the decks edge — Starting 2026 Model Year
Cutting Unit Size	27.00 in (68.58 cm) — Starting 2026 Model Year
Cutting Width	108.00 in (274.32 cm) — Starting 2026 Model Year
Frequency of clip (FOC Reels) OR Blade tip speed (decks)	409 m; 16,097 fpm — Starting 2026 Model Year
Height-Of-Cut	1.91 to 10.2 cm; no tool adjustment; 0.75 to 4 in.; no tool adjustment — Starting 2026 Model Year
Number	5 — Starting 2026 Model Year
Rollers	Rear: 7.62 cm, 3 in.; Front: 12.70 cm, 5 in. — Starting 2026 Model Year

John Deere 9009A TerrainCut™ Mower Dimensions specifications
Ground Speed - Mowing	8.00 mph (12.87 kph) — Starting 2026 Model Year
Ground Speed - Reverse	5.00 mph (8.05 kph) — Starting 2026 Model Year
Ground Speed - Transport	12.50 mph (20.12 kph) — Starting 2026 Model Year
Height With ROPS	87.40 in (222.00 cm) — Starting 2026 Model Year
Length	134.00 in (340.36 cm) — Starting 2026 Model Year
Mowing Position Width	2.74 m; 17.15 cm overlap between front and rear decks; 9 ft; 108 in. overlap between front and rear decks — Starting 2026 Model Year
Wheelbase	68.90 in (175.01 cm) — Starting 2026 Model Year

John Deere 9009A TerrainCut™ Mower Engine specifications
Air Cleaner	2-stage dry element — Starting 2026 Model Year
Compliant Emission Regulation	United States/Canada Final Tier 4 — Starting 2026 Model Year
Cooling System	Liquid centrifugal pump; forward machine location for optimum cooling — Starting 2026 Model Year
Cylinders	4 — Starting 2026 Model Year
Displacement	127.60 cu in (2,090.99 cu cm) — Starting 2026 Model Year
Fuel	Diesel up to B20 compliant — Starting 2026 Model Year
Maximum Engine Power	2800.0 rpm — Starting 2026 Model Year
Type	Direct Inject Turbocharged Diesel B20 compliant — Starting 2026 Model Year

John Deere 9009A TerrainCut™ Mower Fuel Economy specifications
Actual Fuel Usage Will Vary Depending On Course Conditions, Operation, Turf And Fuel Quality	25% load 3.63 L/h (0.96 gph); 40% Load 5.64 L/h (1.49 gph); 50% Load 6.85 L/h (1.81 gph) — Starting 2026 Model Year

John Deere 9009A TerrainCut™ Mower Key Specs specifications
Cutting Unit Size	27.00 in (68.58 cm) — Starting 2026 Model Year
Cutting Width	108.00 in (274.32 cm) — Starting 2026 Model Year
Drive Pump	Tandem gear pump — Starting 2026 Model Year
Frequency of clip (FOC Reels) OR Blade tip speed (decks)	409 m; 16,097 fpm — Starting 2026 Model Year
Ground Pressure	12-18 psi — Starting 2026 Model Year
Ground Speed - Mowing	8.00 mph (12.87 kph) — Starting 2026 Model Year
Height-Of-Cut	1.91 to 10.2 cm; no tool adjustment; 0.75 to 4 in.; no tool adjustment — Starting 2026 Model Year
Maximum Engine Power	55.10 hp (41.09 kw) — Starting 2026 Model Year
Operator Display	TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy-to-read screen; quick on the go settings for mow and transport speed; Turn Speed; LoadMatch and ON/OFF Weight Transfer and Cruise Control Use selection; Cutting unit drop rate adjustment; All settings are passcode protected — Starting 2026 Model Year
Throttle	No throttle lever; Automatic controls with AutoPedal foot controls; manual control through TechControl display — Starting 2026 Model Year
Traction Drive	eHydro™ servo controlled hydraulic traction pump provides flow to All-wheel-drive GRIP system; GRIP traction provides hydraulic flow between front and opposite rear wheel for increased traction to reduce high side tire slippage — Starting 2026 Model Year
Wheelbase	68.90 in (175.01 cm) — Starting 2026 Model Year

John Deere 9009A TerrainCut™ Mower Operating Weight specifications
Cutting Units Lowered	1814.37 kg, 4000 lb with decks up — Starting 2026 Model Year

John Deere 9009A TerrainCut™ Mower Sound Levels specifications
Measuring Standard	ISO 11201 — Starting 2026 Model Year
Operator Ear Full Engine RPM	90.0 dBA — Starting 2026 Model Year

John Deere 9009A TerrainCut™ Mower Vehicle specifications
Brakes	Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system — Starting 2026 Model Year
Cutting Units Drive	Direct-coupled hydraulic gear motor — Starting 2026 Model Year
Drive Pump	Tandem gear pump — Starting 2026 Model Year
Front Drive Tires	26.5x14-12 6PR Ultra Trac — Starting 2026 Model Year
Fuel Tank Capacity	16.00 gal (60.56 l) — Starting 2026 Model Year
Ground Pressure	12-18 psi — Starting 2026 Model Year
Hydraulic System Capacity	12.00 gal (45.42 l) — Starting 2026 Model Year
ROPS	Standard, meets ISO 21299 standards — Starting 2026 Model Year
Steering	Hydraulic power with dual rod, double acting steering cylinder — Starting 2026 Model Year
Steering Tires	20x12-10 4PR Turf — Starting 2026 Model Year
Traction Drive	eHydro™ servo controlled hydraulic traction pump provides flow to All-wheel-drive GRIP system; GRIP traction provides hydraulic flow between front and opposite rear wheel for increased traction to reduce high side tire slippage — Starting 2026 Model Year

John Deere 9009A TerrainCut™ Mower Warranty specifications
Type	Two-year limited — Starting 2026 Model Year