John Deere 9009A TerrainCut™ Mower Specs

Category: Mowers ➔
Manufacturer: John Deere ➔
Model: 9009A TerrainCut™ ➔

Certification

John Deere 9009A TerrainCut™ Mower Certification specifications
Type	ANSI B71.4-2012.; CE - Starting 2026

Controls

John Deere 9009A TerrainCut™ Mower Controls specifications
Forward/Reverse	2-pedal - Starting 2026
Ignition	Key Switch on Command Arm - Starting 2026
Mower Lift	One-touch single handle - Starting 2026
Operator Display	TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy-to-read screen; quick on the go settings for mow and transport speed; Turn Speed; LoadMatch and ON/OFF Weight Transfer and Cruise Control Use selection; Cutting unit drop rate adjustment; All settings are passcode protected - Starting 2026
Parking Brake	Electric Switch on Command Arm for Internal Wet Disk Brakes - Starting 2026
PTO	Electric Switch on Command Arm for quick and easy transition from mow to transport - Starting 2026
Seat	Air Ride Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment - Starting 2026
Storage	Operator storage located on left side for easy access from operator seat - Starting 2026
Throttle	No throttle lever; Automatic controls with AutoPedal foot controls; manual control through TechControl display - Starting 2026
Tilt Steering	Left Foot operated for easy adjustment - Starting 2026
Work Lights	3 standard work lights in front - Starting 2026

Cutting Units

John Deere 9009A TerrainCut™ Mower Cutting Units specifications
Construction	Single sheet 10-gauge steel stamped deck with front skid plate; 1.5 in. (38 mm) tall and 0.5 in. (12.7 mm) thick steel stock welded to the decks edge - Starting 2026
Cutting Unit Size	27.00 in (68.58 cm) - Starting 2026
Cutting Width	108.00 in (274.32 cm) - Starting 2026
Frequency of clip (FOC Reels) OR Blade tip speed (decks)	409 m; 16,097 fpm - Starting 2026
Height-Of-Cut	1.91 to 10.2 cm; no tool adjustment; 0.75 to 4 in.; no tool adjustment - Starting 2026
Number	5 - Starting 2026
Rollers	Rear: 7.62 cm, 3 in.; Front: 12.70 cm, 5 in. - Starting 2026

Dimensions

John Deere 9009A TerrainCut™ Mower Dimensions specifications
Ground Speed - Mowing	8.00 mph (12.87 kph) - Starting 2026
Ground Speed - Reverse	5.00 mph (8.05 kph) - Starting 2026
Ground Speed - Transport	12.50 mph (20.12 kph) - Starting 2026
Height With ROPS	87.40 in (222.00 cm) - Starting 2026
Length	134.00 in (340.36 cm) - Starting 2026
Mowing Position Width	2.74 m; 17.15 cm overlap between front and rear decks; 9 ft; 108 in. overlap between front and rear decks - Starting 2026
Wheelbase	68.90 in (175.01 cm) - Starting 2026

Engine

John Deere 9009A TerrainCut™ Mower Engine specifications
Air Cleaner	2-stage dry element - Starting 2026
Compliant Emission Regulation	United States/Canada Final Tier 4 - Starting 2026
Cooling System	Liquid centrifugal pump; forward machine location for optimum cooling - Starting 2026
Cylinders	4 - Starting 2026
Displacement	127.60 cu in (2,090.99 cu cm) - Starting 2026
Fuel	Diesel up to B20 compliant - Starting 2026
Maximum Engine Power	2800.0 rpm - Starting 2026
Type	Direct Inject Turbocharged Diesel B20 compliant - Starting 2026

Fuel Economy

John Deere 9009A TerrainCut™ Mower Fuel Economy specifications
Actual Fuel Usage Will Vary Depending On Course Conditions, Operation, Turf And Fuel Quality	25% load 3.63 L/h (0.96 gph); 40% Load 5.64 L/h (1.49 gph); 50% Load 6.85 L/h (1.81 gph) - Starting 2026

Key Specs

John Deere 9009A TerrainCut™ Mower Key Specs specifications
Cutting Unit Size	27.00 in (68.58 cm) - Starting 2026
Cutting Width	108.00 in (274.32 cm) - Starting 2026
Drive Pump	Tandem gear pump - Starting 2026
Frequency of clip (FOC Reels) OR Blade tip speed (decks)	409 m; 16,097 fpm - Starting 2026
Ground Pressure	12-18 psi - Starting 2026
Ground Speed - Mowing	8.00 mph (12.87 kph) - Starting 2026
Height-Of-Cut	1.91 to 10.2 cm; no tool adjustment; 0.75 to 4 in.; no tool adjustment - Starting 2026
Maximum Engine Power	55.10 hp (41.09 kw) - Starting 2026
Operator Display	TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy-to-read screen; quick on the go settings for mow and transport speed; Turn Speed; LoadMatch and ON/OFF Weight Transfer and Cruise Control Use selection; Cutting unit drop rate adjustment; All settings are passcode protected - Starting 2026
Throttle	No throttle lever; Automatic controls with AutoPedal foot controls; manual control through TechControl display - Starting 2026
Traction Drive	eHydro™ servo controlled hydraulic traction pump provides flow to All-wheel-drive GRIP system; GRIP traction provides hydraulic flow between front and opposite rear wheel for increased traction to reduce high side tire slippage - Starting 2026
Wheelbase	68.90 in (175.01 cm) - Starting 2026

Operating Weight

John Deere 9009A TerrainCut™ Mower Operating Weight specifications
Cutting Units Lowered	1814.37 kg, 4000 lb with decks up - Starting 2026

Sound Levels

John Deere 9009A TerrainCut™ Mower Sound Levels specifications
Measuring Standard	ISO 11201 - Starting 2026
Operator Ear Full Engine RPM	90.0 dBA - Starting 2026

Vehicle

John Deere 9009A TerrainCut™ Mower Vehicle specifications
Brakes	Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system - Starting 2026
Cutting Units Drive	Direct-coupled hydraulic gear motor - Starting 2026
Drive Pump	Tandem gear pump - Starting 2026
Front Drive Tires	26.5x14-12 6PR Ultra Trac - Starting 2026
Fuel Tank Capacity	16.00 gal (60.56 l) - Starting 2026
Ground Pressure	12-18 psi - Starting 2026
Hydraulic System Capacity	12.00 gal (45.42 l) - Starting 2026
ROPS	Standard, meets ISO 21299 standards - Starting 2026
Steering	Hydraulic power with dual rod, double acting steering cylinder - Starting 2026
Steering Tires	20x12-10 4PR Turf - Starting 2026
Traction Drive	eHydro™ servo controlled hydraulic traction pump provides flow to All-wheel-drive GRIP system; GRIP traction provides hydraulic flow between front and opposite rear wheel for increased traction to reduce high side tire slippage - Starting 2026

Warranty

John Deere 9009A TerrainCut™ Mower Warranty specifications
Type	Two-year limited - Starting 2026

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon