John Deere S300 Mower Specs

Category: Mowers ➔
Manufacturer: John Deere ➔
Model: S300 ➔

Additional Information

John Deere S300 Mower Additional Information specifications
Date Collected	2020-08-24 - Starting 2026

Cutterbar

John Deere S300 Mower Cutterbar specifications
Adjustable Gauge Shoes	Yes - Starting 2026
Angle Adjustment	Manual or hydraulic - Starting 2026
Angle Range - Maximum	8.0 degree (angle) - Starting 2026
Angle Range - Minimum	2.0 degree (angle) - Starting 2026
Cutterbar Oil Check	Combination check, drain plug - Starting 2026
Cutterbar Protection	Shear hub - Starting 2026
Cutting Height	1.1-3.8 in. - Starting 2026
Cutting Width	9.75 ft (2.97 m) - Starting 2026
Disk Drive	Gear - Starting 2026
Disk Speed	2650.0 rpm - Starting 2026
Knife Tip Speed	191.00 mph (307.38 kph) - Starting 2026
Lubrication	Hy-Gard oil - Starting 2026
Number Of Disks	6 - Starting 2026
Number Of Knives	12 - Starting 2026
Oil Reservoir Capacity	7.4 qt - Starting 2026
Type	John Deere - Starting 2026

Dimensions

John Deere S300 Mower Dimensions specifications
Standard Tires	11L-15 standard, 31x13.5L optional - Starting 2026
Transport Length	20.60 ft (6.28 m) - Starting 2026
Transport Width	9.75 ft (2.97 m) - Starting 2026
Weight, Impeller Conditioner	4,696.00 lbs (2,130.07 kg) - Starting 2026
Weight, Roll Conditioner	With Urethane roll conditioner: 2,272 kg 5,012 lb; With Steel roll conditioner: 2,322 kg 5,120 lb - Starting 2026

Impeller Conditioner

John Deere S300 Mower Impeller Conditioner specifications
Diameter	23.40 in (59.44 cm) - Starting 2026
Drive	3-V powerband belt and sheaves - Starting 2026
Number Of Speeds	2 - Starting 2026
Number Of Tines	45 - Starting 2026
Tines Type	V-tines - Starting 2026
Width	73.00 in (185.42 cm) - Starting 2026

Key Specs

John Deere S300 Mower Key Specs specifications
1000 RPM 1-3/8 in PTO	65-150 hp - Starting 2026
Cutting Width	9.75 ft (2.97 m) - Starting 2026
Hydraulic Pressure Required	2000.0 psi - Starting 2026
Number Of Disks	6 - Starting 2026
Optional Hitch	Equal angle, Rockshaft swivel or Drawbar swivel - Starting 2026
Power Take-Off (PTO) Speed	540, 1000 rpm - Starting 2026
Standard Hitch	Clevis - Starting 2026
Transport Width	9.75 ft (2.97 m) - Starting 2026

Power Requirements

John Deere S300 Mower Power Requirements specifications
1000 RPM 1-3/8 in PTO	65-150 hp - Starting 2026
540 RPM PTO	65-81 hp - Starting 2026
Power Take-Off (PTO) Speed	540, 1000 rpm - Starting 2026

Rolls Conditioner

John Deere S300 Mower Rolls Conditioner specifications
Design	Urethane: Recessed cleat; Steel: Intermeshing flutes V-10 - Starting 2026
Drive	Telescoping shaft - Starting 2026
Speed	664.0 rpm - Starting 2026
Type Of Material	Urethane or steel - Starting 2026
Width	73.00 in (185.42 cm) - Starting 2026

Tractor Equipment

John Deere S300 Mower Tractor Equipment specifications
Hydraulic Pressure Required	2000.0 psi - Starting 2026
Optional Hitch	Equal angle, Rockshaft swivel or Drawbar swivel - Starting 2026
Standard Hitch	Clevis - Starting 2026
Tractor Connection	21 spline - Starting 2026

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon