Create a CEG Account  /  CEG Login
☰
Parts
Buyer's Guides
Digital Issues
Videos


John Deere X590 (54-in. Deck) Mower Specs

Additional Information

John Deere X590 (54-in. Deck) Mower Additional Information specifications
Date Collected 2022-10-03T00:00:00 - Starting 2026
Manufacturing Location Horicon, Wisconsin, USA - Starting 2026

Buyer's Notes

John Deere X590 (54-in. Deck) Mower Buyer's Notes specifications
Notes Heavy-duty garden tractor transaxle Convenient power steering and hydraulic lift Built-in front and rear weight brackets - Starting 2026
Warranty 4 year/500 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) - Starting 2026

Chassis

John Deere X590 (54-in. Deck) Mower Chassis specifications
Cup Holder Yes - Starting 2026
Equipment Mounting Yes, heavy duty - Starting 2026
Fender Deck Material Stamped steel - Starting 2026
Fender Handles/Grips Handles - Starting 2026
Floor Mats Sure-grip rubber - Starting 2026
Frame Welded heavy-duty - Starting 2026
Front Axle Cast iron front axle, front wheel ball bearings - Starting 2026
Front Tires 16x6.5-8 turf - Starting 2026
Hood Material Fully enclosed, molded-in color material reduces sound, will not rust or dent - Starting 2026
Maximum Towing Capacity 800.00 lbs (362.87 kg) - Starting 2026
Primer/Paint E-coat/powder - Starting 2026
Rear Tires 24x12-12 HDAP - Starting 2026
Receiver Hitch No - Starting 2026
Service Interval Decal Yes - Starting 2026
Spindle Bushings Metal, replaceable - Starting 2026
Storage Yes, covered toolbox - Starting 2026
Weight Bracket Standard front and rear - each holds up to four Quik-Tatch weights, 42 lb / 19 kg - Starting 2026

Dimensions

John Deere X590 (54-in. Deck) Mower Dimensions specifications
Height 52.70 in (133.86 cm) - Starting 2026
Overall Length 77.40 in (196.60 cm) - Starting 2026
Weight 796.00 lbs (361.06 kg) - Starting 2026
Wheelbase 51.20 in (130.05 cm) - Starting 2026
Width With Mower 68.40 in (173.74 cm) - Starting 2026
Width With Mower (Deflector Raised For Storage) 58.30 in (148.08 cm) - Starting 2026
Width Without Mower 40.70 in (103.38 cm) - Starting 2026

Electrical System

John Deere X590 (54-in. Deck) Mower Electrical System specifications
12-V Outlet Yes - Starting 2026
Backup Lights No - Starting 2026
Battery Cold Crank Amps 340.0 CCA - Starting 2026
Charging System Flywheel alternator, regulated - Starting 2026
Engine Starter Solenoid shift - Starting 2026
Headlights Two standard, incandescent, 27 W - Starting 2026
Hour Meter Yes - Starting 2026
Rear Work Lights No - Starting 2026
Taillights Or Reflector Reflectors - Starting 2026

Engine

John Deere X590 (54-in. Deck) Mower Engine specifications
Air Cleaner Dry, replaceable with foam precleaner - Starting 2026
Choke/Speed Control No choke required - Starting 2026
Cooling Method Air - Starting 2026
Cylinders V-twin, cast-iron liners - Starting 2026
Displacement 44.30 cu in (725.95 cu cm) - Starting 2026
Engine Manufacturer/Model FS730 EFI - Starting 2026
Engine Power 25.50 hp (19.02 kw) - Starting 2026
Engine Type Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter - Starting 2026
Governor Constant-speed electronic throttle control - Starting 2026
Oil Change No-tools oil drain with replaceable filter - Starting 2026

Fuel System

John Deere X590 (54-in. Deck) Mower Fuel System specifications
Fuel Delivery Open-loop electronic fuel injection (EFI) - Starting 2026
Fuel Fill Opening On left fender - Starting 2026
Fuel Gauge Gauge on dash - Starting 2026
Fuel Tank Capacity 4.40 gal (16.65 l) - Starting 2026
Fuel Tank Location Rear - Starting 2026
Type Gasoline - Starting 2026

Key Specs

John Deere X590 (54-in. Deck) Mower Key Specs specifications
Cutting Width 54.00 in (137.16 cm) - Starting 2026
Engine Manufacturer/Model FS730 EFI - Starting 2026
Engine Power 25.50 hp (19.02 kw) - Starting 2026
Lift System Type Hydraulic - Starting 2026
Rear Tires 24x12-12 HDAP - Starting 2026
Transaxle Control Twin Touch™ pedals - Starting 2026
Transaxle Type K72 hydrostatic integrated with transaxle - Starting 2026
Warranty 4 year/500 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) - Starting 2026

Lift System

John Deere X590 (54-in. Deck) Mower Lift System specifications
Cut Height Increments 0.25 in (0.63 cm) - Starting 2026
Hydraulic Outlets No - Starting 2026
Lift System Type Hydraulic - Starting 2026
Mower Cut Height - Maximum 4.00 in (10.16 cm) - Starting 2026
Mower Cut Height - Minimum 1.00 in (2.54 cm) - Starting 2026
Preset Cut Height Yes - Starting 2026

Mower Attachability

John Deere X590 (54-in. Deck) Mower Mower Attachability specifications
Drive System Dual belt - Starting 2026
Front Draft Arms Attached with spring pins at two points - Starting 2026
Mower Wheels Rotate Yes, 90 degrees for easy mower removal - Starting 2026
Rear Draft Arms Quick-pull pins - Starting 2026
Type Roll under tractor - Starting 2026

Mower Deck

John Deere X590 (54-in. Deck) Mower Mower Deck specifications
Construction Forged steel deck shell - Starting 2026
Cutting Width 54.00 in (137.16 cm) - Starting 2026
Mower Deck Material 10.0 gauge - Starting 2026
Mower Drive System Electric power take-off (PTO) clutch, in-line belt - Starting 2026
Mower Level Adjustment Exact Adjust ports and onboard deck-leveling gauge - Starting 2026
Mower Wash Port Yes - Starting 2026
Mower Wheel Adjustment Seven-position, spring-loaded pin - Starting 2026
Mower Wheels Four - Starting 2026
Type Side discharge - Starting 2026

Optional Equipment

John Deere X590 (54-in. Deck) Mower Optional Equipment specifications
Brush Guard Yes - Starting 2026
Bucket Holder Yes, double bucket - Starting 2026
Front Blade 48.00 in (121.92 cm) - Starting 2026
Front Bumper Standard front bumper/weight bracket - Starting 2026
Front Thatcher 54.00 in (137.16 cm) - Starting 2026
Grass Striping Lawn striping kit - Starting 2026
Mowers 54A (standard) - Starting 2026
Mulching System Yes, MulchControl™ - Starting 2026
Powered Material Collection Power Flow™ blower - Starting 2026
Rear Bagger 19.0 bu - Starting 2026
Rotary Tiller 30.00 in (76.20 cm) - Starting 2026
Sleeve Hitch Yes, implements include box scraper, rear blade, plow, disk, and cultivator - Starting 2026
Snow Blower 47.00 in (119.38 cm) - Starting 2026
Sprayer - Mounted 25.00 gal (94.63 l) - Starting 2026
Sprayer - Tow-Behind 45.00 gal (170.33 l) - Starting 2026
Spreader - Mounted 125.00 lbs (56.70 kg) - Starting 2026
Spreader - Tow-Behind 175.00 lbs (79.38 kg) - Starting 2026
Sun Canopy Yes - Starting 2026
Tow-Behind Tools 19 - Starting 2026
Tractor Shovel 40.00 in (101.60 cm) - Starting 2026
Weather Protection Weather enclosure - Starting 2026

Safety

John Deere X590 (54-in. Deck) Mower Safety specifications
Backup Protection Reverse Implement Option (RIO) - Starting 2026
Meets ANSI Standard Yes - Starting 2026
Meets OPEI Standard Yes - Starting 2026
Safety Video Yes - Starting 2026

Seat

John Deere X590 (54-in. Deck) Mower Seat specifications
Armrests Optional - Starting 2026
Fore-Aft Adjustment 6.60 in (16.76 cm) - Starting 2026
Seat Back Height 21.00 in (53.34 cm) - Starting 2026
Seat Suspension Six-position parallel arm - Starting 2026
Type Cut-and-sewn high-back - Starting 2026

Steering

John Deere X590 (54-in. Deck) Mower Steering specifications
Four-Wheel Steer Not available on this model - Starting 2026
Steering Wheel 14.00 in (35.56 cm) - Starting 2026
Tilt Steering Wheel Standard, five position - Starting 2026
Turning Radius 22.00 in (55.88 cm) - Starting 2026
Type Power, hydraulic - Starting 2026
Uncut Circle Radius 24.00 in (60.96 cm) - Starting 2026

Transaxle

John Deere X590 (54-in. Deck) Mower Transaxle specifications
Brakes Internal wet disc - Starting 2026
Cruise Control Yes, button on dash - Starting 2026
Differential Lock Standard - Starting 2026
Forward Speed 7.20 mph (11.59 kph) - Starting 2026
Oil Cooler Fins and fan on transaxle - Starting 2026
Oil Filter Yes, replaceable - Starting 2026
Reverse Speed 5.20 mph (8.37 kph) - Starting 2026
Transaxle Control Twin Touch™ pedals - Starting 2026
Transaxle Type K72 hydrostatic integrated with transaxle - Starting 2026
×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.