Caterpillar 725C Off-Highway Truck Specs

Category: Off-Highway Trucks ➔
Manufacturer: Caterpillar ➔
Model: 725C ➔

The Caterpillar 725C is an articulated off-highway truck designed for hauling material in construction, quarry, and earthmoving applications. It is part of Caterpillar's 725 series and is commonly used for site development, road building, and large-scale material transport on rough terrain. The 725C features a rear dump body, articulated steering, and all-wheel drive for improved traction and maneuverability in challenging conditions. It is typically powered by a diesel engine and built for high-capacity hauling with operator comfort and service access in mind. The Caterpillar 725C remains a recognized model in the off-highway truck category.

Body Capacities

Caterpillar 725C Off-Highway Truck Body Capacities specifications
Heaped (Sae 2:1)	19.6 cu yd
Struck	14.4 cu yd
Tailgate Heaped Sae 2:1	20.4 cu yd
Tailgate Struck	14.5 cu yd

Body Hoist

Caterpillar 725C Off-Highway Truck Body Hoist specifications
Lower Time	8 s
Raise Time	10 s

Body Plate

Caterpillar 725C Off-Highway Truck Body Plate specifications
Body Plate Type	High Strength Brinell HB450 Wear Resistant Steel

Dimensions

Caterpillar 725C Off-Highway Truck Dimensions specifications
Height	12.42 ft (3.78 m)
Length	34.58 ft (10.54 m)
Weight	51,191.00 lbs (23,219.88 kg)
Width	9.67 ft (2.95 m)

Dump

Caterpillar 725C Off-Highway Truck Dump specifications
Capacity - Heaped	20.4 cu yd
Capacity - Struck	14.4 cu yd
Dump Angle	45 degrees
Lower Time	8 sec
Raise Time	10 sec
Rated Payload	23,586.80 lbs (10,698.81 kg)

Engine

Caterpillar 725C Off-Highway Truck Engine specifications
Bore	4.60 in (11.68 cm)
Displacement	567.00 cu in (9,291.49 cu cm)
Engine Make	2236
Engine Model	Cat C9.3 ACERT
Engine Model - U.S. Epa Tier 4 Final/Eu Stage Iv	Cat C9.3 ACERT
Gross Power	320.00 hp (238.63 kw)
Gross Power - Sae J1995	320.00 hp (238.63 kw)
Max Torque	1,263.00 lbs ft (1,712.38 nm)
Net Power	314.00 hp (234.15 kw)
Net Power - Iso 14396	316.00 hp (235.65 kw)
Net Power - Sae J1349	314.00 hp (234.15 kw)
No Engine De-Rating Required Below	8,400.00 ft (2,560.32 m)
Peak Engine Torque Gross (Sae J1995)	1,275.00 lbs ft (1,728.65 nm)
Peak Engine Torque Net (Iso 14396)	1,263.00 lbs ft (1,712.38 nm)
Peak Engine Torque Speed	1200 rpm
Stroke	5.90 in (14.99 cm)
Torque Measured @	1200 rpm

Operating Weights

Caterpillar 725C Off-Highway Truck Operating Weights specifications
Center Axle - Empty	10,030.00 lbs (4,549.54 kg)
Center Axle - Loaded	33,333.00 lbs (15,119.61 kg)
Center Axle - Rated Load	23,303.00 lbs (10,570.08 kg)
Front Axle - Empty	31,813.00 lbs (14,430.15 kg)
Front Axle - Loaded	37,236.00 lbs (16,889.99 kg)
Front Axle - Rated Load	5,423.00 lbs (2,459.83 kg)
Rear Axle - Empty	9,348.00 lbs (4,240.19 kg)
Rear Axle - Loaded	32,651.00 lbs (14,810.26 kg)
Rear Axle - Rated Load	23,303.00 lbs (10,570.08 kg)
Total - Empty	51,191.00 lbs (23,219.88 kg)
Total - Loaded	103,220.00 lbs (46,819.86 kg)
Total - Rated Load	52,029.00 lbs (23,599.99 kg)

Operational

Caterpillar 725C Off-Highway Truck Operational specifications
Cooling System Fluid Capacity	5.80 gal (21.95 l)
Engine Oil Capacity	2.70 gal (10.22 l)
Fuel Capacity	28.60 gal (108.25 l)
Hydraulic System Fluid Capacity	7.70 gal (29.14 l)
Transmission Fluid Capacity	3.30 gal (12.49 l)

Service Refill Capacities

Caterpillar 725C Off-Highway Truck Service Refill Capacities specifications
Cooling System	21.90 gal (82.89 l)
Def Tank (Iso 2224-1)	5.30 gal (20.06 l)
Engine Crankcase	10.00 gal (37.85 l)
Final Drives/Differential	35.70 gal (135.12 l)
Fuel Tank	108.80 gal (411.81 l)
Hydraulic System	29.10 gal (110.14 l)
Output Transfer Gear Box	6.30 gal (23.85 l)
Transmission	12.40 gal (46.93 l)

Sound Levels

Caterpillar 725C Off-Highway Truck Sound Levels specifications
Interior Cab	76 dB(A)

Standards

Caterpillar 725C Off-Highway Truck Standards specifications
Brakes	ISO 3450 - 2011
Cab - Fops	ISO 3449 Level II - 2005
Cab - Rops	ISO 3471 - 2008
Steering	ISO 5010 - 2007

Steering

Caterpillar 725C Off-Highway Truck Steering specifications
Lock To Lock	4.75 seconds @ 60 rpm

Transmission

Caterpillar 725C Off-Highway Truck Transmission specifications
Forward - 1	5.00 mph (8.05 kph)
Forward - 2	9.00 mph (14.48 kph)
Forward - 3	14.00 mph (22.53 kph)
Forward - 4	21.00 mph (33.80 kph)
Forward - 5	30.00 mph (48.28 kph)
Forward - 6	35.00 mph (56.33 kph)
Number Of Forward Gears	6
Number Of Reverse Gears	1
Reverse - 1	6.00 mph (9.66 kph)

Turning Circle

Caterpillar 725C Off-Highway Truck Turning Circle specifications
Note	Dimensions are for machines equipped with 23.5R25 tires.
Turning Dimensions - Aisle Width	210.00 in (533.40 cm)
Turning Dimensions - Clearance Radius	318.00 in (807.72 cm)
Turning Dimensions - Inside Radius	153.00 in (388.62 cm)
Turning Dimensions - Sae Turning Radius	294.00 in (746.76 cm)
Turning Dimensions - Steer Angle - Left/Right	45 degrees

Weights

Caterpillar 725C Off-Highway Truck Weights specifications
Center Axle - Empty	10030 %
Center Axle - Loaded	23303 %
Front Axle - Empty	31,813.00 lbs (14,430.15 kg)
Front Axle - Loaded	5423 %
Rear Axle - Empty	9,348.00 lbs (4,240.19 kg)
Rear Axle - Loaded	23,303.00 lbs (10,570.08 kg)
Total Empty	51,191.00 lbs (23,219.88 kg)
Total Loaded	103,220.00 lbs (46,819.86 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon