All Equipment Category Specs ↠ Off-Highway Trucks ↠ Caterpillar 740C

Caterpillar 740C Off-Highway Truck

Category: Off-Highway Trucks (See all Off-Highway Trucks for sale)
Manufacturer: Caterpillar (See all Caterpillar Equipment for sale)
Model: 740C (See all Caterpillar 740C for sale)

Body Capacities

Heaped (SAE 2:1)	30 cu yd (23 cu m)
Struck	24 cu yd (18 cu m)

Body Plate

Body Plate Type

High strength Brinell HB450 wear resistant steel

Dump

Capacity - Heaped	30 cu yd (23 cu m)
Capacity - Struck	24 cu yd (18 cu m)
Rated Payload	84,000 lbs (38,102 kg)

Engine

Bore	6 in (14 cm)
Displacement	1,106 cu in (18,124 cu cm)
Engine Model	Cat C18 ACERT
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Final	Cat C18 ACERT
Gross Power	511 hp (381 kw)
Gross Power - SAE J1995	511 hp (381 kw)
Net Power	496 hp (370 kw)
Net Power - ISO 14396	504 hp (376 kw)
Net Power - SAE J1349	496 hp (370 kw)
No Engine De-rating Required Below	10,000 ft (3,048 m)
Peak Engine Torque Gross (SAE J1995)	1,931 lbs ft (2,618 nm)
Peak Engine Torque Net (SAE J1349)	1,887 lbs ft (2,558 nm)
Peak Engine Torque Speed	1200 rpm
Stroke	7 in (18 cm)
Torque Measured @	1200 rpm

Operating Specifications

Cooling System Fluid Capacity	24 gal (90 l)
Transmission Fluid Capacity	20 gal (75 l)

Operating Weights

Center Axle - Empty	17,416 lbs (7,900 kg)
Center Axle - Loaded	57,541 lbs (26,100 kg)
Center Axle - Rated Load	40,124 lbs (18,200 kg)
Front Axle - Empty	45,239 lbs (20,520 kg)
Front Axle - Loaded	48,766 lbs (22,120 kg)
Front Axle - Rated Load	3,527 lbs (1,600 kg)
Rear Axle - Empty	16,865 lbs (7,650 kg)
Rear Axle - Loaded	56,989 lbs (25,850 kg)
Rear Axle - Rated Load	40,124 lbs (18,200 kg)
Total - Empty	79,521 lbs (36,070 kg)
Total - Loaded	163,296 lbs (74,070 kg)
Total - Rated Load	83,776 lbs (38,000 kg)

Service Refill Capacities

Axles - Each	16 gal (60 l)
Brake Cooling Tank	18 gal (67 l)
Cooling System	24 gal (90 l)
DEF Tank	7 gal (25 l)
Engine Crankcase	14 gal (52 l)
Final Drive - Each	1 gal (5 l)
Fuel Tank	145 gal (550 l)
Steering/Hoist Hydraulic System	37 gal (140 l)
Transmission - OTG	20 gal (75 l)

Sound Levels

Interior Cab

79 dB(A)

Standards

Brakes	ISO 3450-2011
Cab - FOPS	ISO 3449 Level II-2005
Cab - ROPS	ISO 3471-2008
Steering	ISO 5010-2007

Steering System

Lock to Lock

4.6 seconds @ 60 rpm

Transmission

Forward - 1	4 mph (6 kph)
Forward - 2	5 mph (8 kph)
Forward - 3	7 mph (11 kph)
Forward - 4	9 mph (14 kph)
Forward - 5	12 mph (19 kph)
Forward - 6	14 mph (23 kph)
Forward - 7	20 mph (32 kph)
Forward - 8	24 mph (38 kph)
Forward - 9	34 mph (55 kph)
Number of Forward Gears	9
Number of Reverse Gears	2
Reverse - 1	4 mph (6 kph)
Reverse - 2	9 mph (15 kph)

Turning Circle

Turning Dimensions - Aisle Width	235 in (597 cm)
Turning Dimensions - Clearance Radius	358 in (909 cm)
Turning Dimensions - Inside Radius	174 in (442 cm)
Turning Dimensions - SAE Turning Radius	340 in (864 cm)

Weights

Center Axle - empty	17,416 lbs (7,900 kg)
Center Axle - loaded	40,124 lbs (18,200 kg)
Front Axle - empty	45,239 lbs (20,520 kg)
Front Axle - loaded	3,527 lbs (1,600 kg)
Rear Axle - empty	16,865 lbs (7,650 kg)
Rear Axle - loaded	40,124 lbs (18,200 kg)
Total Empty	79,521 lbs (36,070 kg)
Total Loaded	163,296 lbs (74,070 kg)

See all of the Caterpillar 740Cs we have listed for sale.

A 2017 Caterpillar 740C From Ritchie Bros. Auctioneers for Auction Pricing

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon