Caterpillar 794 AC Off-Highway Truck Specs

General Specifications

Caterpillar 794 AC Off-Highway Truck General Specifications specifications
Articulated/Rigid	Rigid - Starting 2024
Drive Configuration	2WD - Starting 2024
Engine Type	Cat C175-16 - Starting 2024
Mfg. Model	794 AC - Starting 2024
Operating Weight	1,150,000.00 lbs (521,631.87 kg) - Starting 2024
Planetary Powershift Transmission	Auto - Starting 2024
Rated Payload	327.00 t (327,000.00 kg) - Starting 2024

Caterpillar 794 AC Off-Highway Truck Ac Drive System specifications
Controls	IGBT Inverter Technology, air cooled, pressurized cabinet with filtration - Starting 2026
Cooling System	Variable speed, hydraulically driven cooling system - Starting 2026
Generator/Alternator	Brushless, engine mounted, dual bearing - Starting 2026
Top Speed - Loaded	37.00 mph (59.55 kph) - Starting 2026
Total Reduction Ratio	35:01:00 - Starting 2026
Wheel Motor	High-torque AC induction, rear axle mounted - Starting 2026

Caterpillar 794 AC Off-Highway Truck Body Hoists specifications
Body Raise Time - High Idle	24 s - Starting 2026
High Idle Body Lower Time - Float	20 s - Starting 2026
Pump Flow - High Idle (HAA at 1,800 rpm)	221.00 gpm (836.49 lpm) - Starting 2026
Pump Flow - High Idle (LAA at 1,960 rpm)	240.00 gpm (908.40 lpm) - Starting 2026
Relief Valve Setting - Raise	3029 psi - Starting 2026
Total Cycle Time	44 s - Starting 2026

Caterpillar 794 AC Off-Highway Truck Braking System specifications
Dynamic Retarding Power - Continuous	5,480.00 hp (4,086.50 kw) - Starting 2026
Front Wet Disc Brake Surface Area	20378 in² - Starting 2026
Load Brake	Rear service brakes - Starting 2026
Parking Brake	Four-corner, Multi-disc, Spring applied, Hydraulically Released - Starting 2026
Rear - Wet Disc Brake Surface Area	30750 in² - Starting 2026
Service Brakes	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated - Starting 2026
Standards	ISO 3450:2011 - Starting 2026

Caterpillar 794 AC Off-Highway Truck Cab specifications
FOPS Standards	Falling Object Protective Structure (FOPS) meets ISO 3449:2005 Level II for operator and ISO 13459:2012 Level II for trainer. - Starting 2026
ROPS Standards (1)	Rollover Protective Structure (ROPS) meets ISO 3471:2008 criteria for operator and ISO 13459:2012 for trainer. - Starting 2026

Caterpillar 794 AC Off-Highway Truck Capacity - He Body - 100% Fill Factor specifications
Dump Body Plate Thickness Varies Depending on Body Selection - Canopy Plate	0.20 in (0.51 cm) - Starting 2026
Dump Body Plate Thickness Varies Depending on Body Selection - Floor Plate	0.63 in (1.60 cm) - Starting 2026
Dump Body Plate Thickness Varies Depending on Body Selection - Front Plate	0.35 in (0.89 cm) - Starting 2026
Dump Body Plate Thickness Varies Depending on Body Selection - Side Plate	0.31 in (0.79 cm) - Starting 2026
Heaped (SAE 2:1)	180-222 m³ (236-290 yd³) - Starting 2026
Struck	108-133 m³ (142-175 yd³) - Starting 2026

Caterpillar 794 AC Off-Highway Truck Dimensions (Approximate) specifications
Canopy Width (without optional rock deflectors)	29.75 ft (9.07 m) - Starting 2026
Centerline Front Tire Width	23.00 ft (7.01 m) - Starting 2026
Centerline of Rear Dual Tire Width	18.75 ft (5.71 m) - Starting 2026
Dump Clearance	3.00 ft (0.91 m) - Starting 2026
Front Axle Clearance	3.17 ft (0.97 m) - Starting 2026
Front Canopy Height	26.33 ft (8.03 m) - Starting 2026
Ground Clearance	2.67 ft (0.81 m) - Starting 2026
Height - Top of ROPS	22.25 ft (6.78 m) - Starting 2026
Inside Body Width	28.08 ft (8.56 m) - Starting 2026
Loading Height - Empty	22.92 ft (6.99 m) - Starting 2026
Outside Body Width	29.75 ft (9.07 m) - Starting 2026
Overall Canopy Width	31.50 ft (9.60 m) - Starting 2026
Overall Height - Body Raised	48.42 ft (14.76 m) - Starting 2026
Overall Length	50.75 ft (15.47 m) - Starting 2026
Overall Tire Width	28.67 ft (8.74 m) - Starting 2026
Rear Axle - Clearance	3.08 ft (0.94 m) - Starting 2026
Rear Axle - Tail	15.50 ft (4.72 m) - Starting 2026
Wheel Base	21.83 ft (6.65 m) - Starting 2026

Caterpillar 794 AC Off-Highway Truck Engine specifications
Bore	6.90 in (17.53 cm) - Starting 2026
Displacement	5,187.00 cu in (84,999.89 cu cm) - Starting 2026
Emissions Rating	Fuel Optimized - Starting 2026
Engine Model	Cat® C175-16 - Starting 2026
Gross Power - SAE J1995	3,500.00 hp (2,609.99 kw) - Starting 2026
Net Power - SAE J1349	3,405.00 hp (2,539.15 kw) - Starting 2026
Optional Gross Power - SAE J1995	3,100.00 hp (2,311.71 kw) - Starting 2026
Optional Gross Power - SAE J1995 (Option 2)	2,750.00 hp (2,050.71 kw) - Starting 2026
Rated Speed	1800 r/min - Starting 2026
Standard Gross Power - SAE J1995	3,500.00 hp (2,609.99 kw) - Starting 2026
Stroke	8.70 in (22.10 cm) - Starting 2026

Caterpillar 794 AC Off-Highway Truck Final Drives specifications
Total Reduction Ratio	35:01:00 - Starting 2026

Caterpillar 794 AC Off-Highway Truck Service Refill Capacities specifications
Cooling System	211.00 gal (798.64 l) - Starting 2026
Crankcase	82.00 gal (310.37 l) - Starting 2026
Diesel Exhaust Fluid Tank	100.00 gal (378.50 l) - Starting 2026
Final Drive - Each	67.00 gal (253.60 l) - Starting 2026
Fuel Tank	1,300.00 gal (4,920.50 l) - Starting 2026
Hydraulic System - Including Tank	385.00 gal (1,457.23 l) - Starting 2026
Hydraulic Tank	296.00 gal (1,120.36 l) - Starting 2026

Caterpillar 794 AC Off-Highway Truck Sound specifications
Sound Standards (1)	The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 75 dB(A) for cab offered by Caterpillar when properly installed, maintained, and tested with doors and windows closed. - Starting 2026
Sound Standards (2)	Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. - Starting 2026

Caterpillar 794 AC Off-Highway Truck Steering specifications
Steer Angle	39 degrees - Starting 2026
Steering Standards	ISO 5010:2019 - Starting 2026

Caterpillar 794 AC Off-Highway Truck Tires specifications
Rims	36" x 63" - Starting 2026
Standard Tires	53/80 R63 - Starting 2026