Caterpillar 796 AC Off-Highway Truck Specs

General Specifications

Caterpillar 796 AC Off-Highway Truck General Specifications specifications
Articulated/Rigid	Rigid - Starting 2024
Drive Configuration	2WD - Starting 2024
Engine Type	Cat C175-16 - Starting 2024
Mfg. Model	796 AC - Starting 2024
Operating Weight	1,270,000.00 lbs (576,063.03 kg) - Starting 2024
Planetary Powershift Transmission	Auto - Starting 2024
Rated Payload	360.00 t (360,000.00 kg) - Starting 2024

Caterpillar 796 AC Off-Highway Truck Ac Drive System specifications
Controls	Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration - Starting 2026
Cooling System	Cat variable speed, hydraulically driven cooling system - Starting 2026
Generator/Alternator	Cat brushless, engine mounted, dual bearing - Starting 2026
Top Speed - Loaded	40.00 mph (64.37 kph) - Starting 2026
Total Reduction Ratio	35:01:00 - Starting 2026
Wheel Motor	Cat AC induction, rear axle mounted - Starting 2026

Caterpillar 796 AC Off-Highway Truck Body Hoists specifications
Body Lower Time - Float	22 s - Starting 2026
Body Power Down- High Idle	17.5 s - Starting 2026
Body Raise Time - High Idle	21 s - Starting 2026
Pump Flow - High Idle	257.30 gpm (973.88 lpm) - Starting 2026
Relief Valve Setting - Raise	3029 psi - Starting 2026
Type	Twin, two-stage hydraulic cylinders with snubbing valve. - Starting 2026

Caterpillar 796 AC Off-Highway Truck Braking System specifications
Dynamic Retarding Power - Continuous	5,480.00 hp (4,086.50 kw) - Starting 2026
Front Wet Disc Brake Surface Area	20378 in² - Starting 2026
Load Brake	Rear service brakes - Starting 2026
Parking Brake	Four-corner, Multi-disc, Spring Applied, Hydraulically Released - Starting 2026
Rear - Wet Disc Brake Surface Area	30750 in² - Starting 2026
Service Brakes	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated - Starting 2026
Standards	Service and Secondary: ISO 3450:2011 - Starting 2026

Caterpillar 796 AC Off-Highway Truck Cab specifications
Air Conditioning	HFC - 134A refrigerant: 21,600 Btu/h - Starting 2026
FOPS Standards	FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer. - Starting 2026
Heater / Defroster	24600 Btu/h - Starting 2026
ROPS Standards (1)	ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. - Starting 2026

Caterpillar 796 AC Off-Highway Truck Capacity - He Body - 100% Fill Factor specifications
Heaped (SAE 2:1)	186-237 m³ (243-310 yd³) - Starting 2026
Struck	97-153 m³ (127-200 yd³) - Starting 2026

Caterpillar 796 AC Off-Highway Truck Dimensions (Approximate) specifications
Centerline Front Tire Width	23.06 ft (7.03 m) - Starting 2026
Centerline of Rear Dual Tire Width	19.50 ft (5.94 m) - Starting 2026
Dump Clearance - Empty	5.72 ft (1.74 m) - Starting 2026
Front Axle Clearance - Loaded	2.81 ft (0.86 m) - Starting 2026
Front Canopy Height - Empty	26.01 ft (7.93 m) - Starting 2026
Height - Top of ROPS	22.05 ft (6.72 m) - Starting 2026
Inside Body Width	29.44 ft (8.97 m) - Starting 2026
Loading Height - Empty	23.85 ft (7.27 m) - Starting 2026
Outside Body/Canopy Width (without rock deflectors)	31.62 ft (9.64 m) - Starting 2026
Overall Canopy Width (with rock deflectors)	33.15 ft (10.10 m) - Starting 2026
Overall Height - Body Raised	48.85 ft (14.89 m) - Starting 2026
Overall Length	51.44 ft (15.68 m) - Starting 2026
Overall Tire Width - Empty	30.27 ft (9.23 m) - Starting 2026
Rear Axle - Tail	16.07 ft (4.90 m) - Starting 2026
Rear Axle Clearance - Loaded	2.80 ft (0.85 m) - Starting 2026
Wheel Base	21.90 ft (6.68 m) - Starting 2026

Caterpillar 796 AC Off-Highway Truck Service Refill Capacities specifications
Cooling System	211.00 gal (798.64 l) - Starting 2026
Crankcase	82.00 gal (310.37 l) - Starting 2026
Diesel Exhaust Fluid Tank	100.00 gal (378.50 l) - Starting 2026
Final Drive - Each	67.00 gal (253.60 l) - Starting 2026
Front Wheels - Each	7.00 gal (26.50 l) - Starting 2026
Fuel Tank	1,300.00 gal (4,920.50 l) - Starting 2026
Fuel Tank (Tier 4)	1,200.00 gal (4,542.00 l) - Starting 2026
Grease Tank	90.00 lbs (40.82 kg) - Starting 2026
Hydraulic System - Including Tank	385.00 gal (1,457.23 l) - Starting 2026
Hydraulic Tank	296.00 gal (1,120.36 l) - Starting 2026

Caterpillar 796 AC Off-Highway Truck Sound specifications
Sound Standards	The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008. - Starting 2026

Caterpillar 796 AC Off-Highway Truck Suspension specifications
Effective Cylinder Stroke - Front	4.00 in (10.16 cm) - Starting 2026
Effective Cylinder Stroke - Rear	2.00 in (5.08 cm) - Starting 2026
Rear axle - Oscillation	+/- 5.32 degrees - Starting 2026
Type	Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments - Starting 2026

Caterpillar 796 AC Off-Highway Truck Tires specifications
Rims	44" x 63" - Starting 2026
Standard Tires	59/80 R63 - Starting 2026