Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Body | 1,350.00 lbs (612.35 kg) |
| Articulating/Rigid | Rigid |
| Dump Ground Clearance | 1.80 ft (0.55 m) |
| Dump Height | 26.70 ft (8.14 m) |
| Ground Clearance | 1.60 ft (0.49 m) |
| Overall Height | 14.30 ft (4.36 m) |
| Overall Length | 28.60 ft (8.72 m) |
| Overall Width | 15.90 ft (4.85 m) |
| Wheelbase | 12.50 ft (3.81 m) |
| Drive Config | 4x2 |
| Dump Angle | 60 degrees |
| Load Capacity - heaped | 36.30 cu yd (27.75 cu m) |
| Load Capacity - Struck | 27.30 cu yd (20.87 cu m) |
| Lower Time | 15 seconds |
| Raise Time | 13.9 seconds |
| Displacement | 854.40 cu in (14,001.14 cu cm) |
| Engine Model | Series 60 |
| Gross Power | 525.00 hp (391.50 kw) |
| Make | Detroit Diesel |
| Max Torque | 1,750.00 lbs ft (2,372.65 nm) |
| Net Power | 486.00 hp (362.42 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2100 rpm |
| Rated Engine Speed | 72.7 rpm |
| Brake/Hoist System Fluid Capacity | 47.10 gal (178.27 l) |
| Cooling System Fluid Capacity | 55.80 gal (211.20 l) |
| Engine Oil Capacity | 8.00 gal (30.28 l) |
| Fuel Capacity | 120.00 gal (454.20 l) |
| Hydraulic System Fluid Capacity | 72.70 gal (275.17 l) |
| Operating Voltage | 24 volts |
| Steering System Fluid Capacity | 25.70 gal (97.27 l) |
| Tire Size | 18.00R33 |
| Brake/Hoist Hydraulic Tank | 85,000.00 gal (321,725.01 l) |
| Max Speed | 42.40 mph (68.24 kph) |
| Number of Gears - Forward | 6 |
| Number of Gears - Reverse | 2 |
| Transmission Type | Allison H5610A. Fully automatic planetary type with integral lock up converter |
| Empty Weight | 73,799.80 lbs (33,475.07 kg) |
| Loaded Weight | 166,228.60 lbs (75,400.12 kg) |
| Operating Weight | 166,230.00 lbs (75,400.75 kg) |
| Weight Distribution Front - empty | 50% |
| Weight Distribution Front - loaded | 34% |
| Weight Distribution Rear - empty | 50% |
| Weight Distribution Rear - loaded | 66% |