- Category: Off-Highway Trucks ➔
- Manufacturer: John Deere ➔
- Model: 250D ➔
The John Deere 250D is an off-highway articulated dump truck designed for hauling material in construction, quarry, and earthmoving applications. It is part of John Deere's D-Series truck line and is built for operation on rough terrain, with a heavy-duty frame, articulated steering, and a rear dump body for efficient load transport. The 250D is commonly used for moving soil, aggregate, rock, and demolition debris across job sites. Typical features include diesel power, all-wheel drive, and operator-focused controls. The model is recognized for its off-road mobility, load-carrying capacity, and suitability for demanding material handling tasks.
Articulating/Rigid
| Articulating/Rigid | Articulated
|
Dimensions
| Dump Ground Clearance | 2.00 ft (0.61 m)
|
| Dump Height | 20.10 ft (6.13 m)
|
| Ground Clearance | 1.50 ft (0.46 m)
|
| Overall Height | 11.50 ft (3.51 m)
|
| Overall Length | 31.20 ft (9.51 m)
|
| Overall Width | 9.30 ft (2.83 m)
|
| Wheelbase | 16.50 ft (5.03 m)
|
DRIVE SYSTEM
Dump
| Capacity - Heaped | 18.00 cu yd (13.76 cu m)
|
| Capacity - Struck | 13.70 cu yd (10.47 cu m)
|
| Dump Angle | 70 degrees
|
| Lower Time | 6 seconds
|
| Raise Time | 11.9 seconds
|
| Rated Payload | 51,150.00 lbs (23,201.28 kg)
|
Engine
| Aspiration | Turbocharger charge air cooled
|
| Displacement | 549.00 cu in (8,996.52 cu cm)
|
| Engine Model | 6090
|
| Make | Deere
|
| Max Torque | 789.00 lbs ft (1,069.73 nm)
|
| Net Power | 265.00 hp (197.61 kw)
|
| Number of Cylinders | 6
|
| Power Measured @ | 2000 rpm
|
| Torque Measured @ | 1400 rpm
|
Operating Specifications
| Alternator Supplied Amperage | 80 amps
|
| Cooling System Fluid Capacity | 8.70 gal (32.93 l)
|
| Engine Oil Capacity | 6.70 gal (25.36 l)
|
| Fuel Capacity | 90.00 gal (340.65 l)
|
| Hydraulic System Fluid Capacity | 20.80 gal (78.73 l)
|
| Operating Voltage | 24 volts
|
| Tire Size | 23.5R25
|
| Transmission Fluid Capacity | 5.80 gal (21.95 l)
|
Transmission
| Max Speed | 31.00 mph (49.89 kph)
|
| Number of Forward Gears | 6
|
| Number of Reverse Gears | 1
|
| Transmission Type | ZF 6HP592C fully automatic
|
Weights
| Center Axle - empty | 8,994.90 lbs (4,080.02 kg)
|
| Center Axle - loaded | 31,393.90 lbs (14,240.05 kg)
|
| Front Axle - empty | 22,354.90 lbs (10,140.02 kg)
|
| Front Axle - loaded | 29,012.90 lbs (13,160.05 kg)
|
| Operating Weight | 91,490.00 lbs (41,499.22 kg)
|
| Rear Axle - empty | 8,972.90 lbs (4,070.04 kg)
|
| Rear Axle - loaded | 31,085.20 lbs (14,100.03 kg)
|
| Total Empty | 40,344.60 lbs (18,300.03 kg)
|
| Total Loaded | 91,491.90 lbs (41,500.08 kg)
|