Create a CEG Account  /  CEG Login
☰
Parts
Buyer's Guides
Digital Issues
Videos


John Deere 410 P-Tier Off-Highway Truck Specs

General Specifications

John Deere 410 P-Tier Off-Highway Truck General Specifications specifications
Articulated/Rigid Articulated - Starting 2024
Drive Configuration 8-speed forward, 4-speed reverse, countershaft/planetary type with integral retarder and torque-proportioning differential - Starting 2025
Drive System Mech/Electr. Mechanical - Starting 2025
Engine Type John Deere JD14 - Starting 2025
Mfg. Model 410 P-Tier - Starting 2024
Operating Weight 68,608 lb. empty / 150,765 lb. loaded - Starting 2025
Rated Payload 82,157 lb. - Starting 2025

Cooling

John Deere 410 P-Tier Off-Highway Truck Cooling specifications
Engine cooling Coolant mixture is air cooled with two single pass radiators and has a remote pressurized coolant tank. A separate charge air cooler is used for the air system - Starting 2026

Dump body

John Deere 410 P-Tier Off-Highway Truck Dump body specifications
Capacity heaped at 2:1 ISO 6483 ratio (cu yd) 30.0 cu yd - Starting 2026
Capacity heaped at 2:1 ISO 6483 ratio with optional tailgate (cu yd) 31.7 cu yd - Starting 2026
Heater type Body ducted to accept optional exhaust heating - Starting 2026
Maximum dump angle (degrees) 70.0 degrees - Starting 2026
Struck capacity (cu yd) 22.3 cu yd - Starting 2026
Type High Strength Steel Dump Body - Starting 2026

Electrical

John Deere 410 P-Tier Off-Highway Truck Electrical specifications
Alternator standard rating (amp) 145.0 amp - Starting 2026
Alternator voltage (V) 28.0 v - Starting 2026
Battery capacity (CCA) 1400.0 CCA - Starting 2026
Number of batteries 2 - Starting 2026
Voltage (V) 24.0 v - Starting 2026
Voltage per battery (V) 12.0 v - Starting 2026

Engine

John Deere 410 P-Tier Off-Highway Truck Engine specifications
Aspiration Dual series turbocharger with fixed geometry first stage and wastegated second stage; air-to-air aftercooling and cooled exhaust gas recirculation (EGR) - Starting 2026
Cold-start aid option and description Optional Ether Start, Optional Block Heater, Optional Diesel Fired Coolant Heater - Starting 2026
Displacement (cu in.) 830.00 cu in (13,601.29 cu cm) - Starting 2026
Fuel system Electronically controlled high-pressure common-rail (HPCR) with 10 and 4-micron filtration and water separator - Starting 2026
Manufacturer John Deere - Starting 2026
Net peak torque (ISO 9249) at rated rpm (lb-ft) 1,791.00 lbs ft (2,428.24 nm) - Starting 2026
Net peak torque rpm rating (rpm) 1300.0 rpm - Starting 2026
Net power (ISO 9249) at rated rpm (hp) 457.00 hp (340.79 kw) - Starting 2026
Net power rpm rating (rpm) 1700.0 rpm - Starting 2026
Non-road emission standards Final Tier 4/Stage 4 Certified - Starting 2026
Valves per cylinder 4 - Starting 2026

Hydraulics

John Deere 410 P-Tier Off-Highway Truck Hydraulics specifications
Cycle time power down (sec.) 7 s - Starting 2026
Cycle time raise time (sec.) 12 s - Starting 2026
Dump cylinder hydraulics type Dual Acting, single-stage with heat-treated, chrome-plated and polished cylinder rods, hardened steel replaceable bushings and pivot pins - Starting 2026
Hydraulics type Closed center, Variable Displacement, Load-sensing system - Starting 2026
Main Pump Variable displacement, Axial Piston - Starting 2026
Secondary steering pump type Ground Driven Gear Pump with Hydraulic Unloader Valve - Starting 2026

Operating Dimensions

John Deere 410 P-Tier Off-Highway Truck Operating Dimensions specifications
Turning circle radius, inside (ft, in.) 15.2 ft, in. - Starting 2026
Turning circle radius, outside (ft, in.) 29.2 ft, in. - Starting 2026

Operating Weights

John Deere 410 P-Tier Off-Highway Truck Operating Weights specifications
875/65R29 tires (lb) 2,835.00 lbs (1,285.94 kg) - Starting 2026
Front, empty, with standard equipment (lb) 37,236.00 lbs (16,889.99 kg) - Starting 2026
Front, loaded, with standard equipment (lb) 49,978.74 lbs (22,670.00 kg) - Starting 2026
Middle, empty, with standard equipment (lb) 15,685.87 lbs (7,115.00 kg) - Starting 2026
Middle, loaded, with standard equipment (lb) 50,393.20 lbs (22,858.00 kg) - Starting 2026
Rated payload, empty, with standard equipment (lb) 82,157.00 lbs (37,265.83 kg) - Starting 2026
Rear, empty, with standard equipment (lb) 15,685.87 lbs (7,115.00 kg) - Starting 2026
Rear, loaded, with standard equipment (lb) 50,393.20 lbs (22,858.00 kg) - Starting 2026
Steel dump-body liner (lb) 3,062.00 lbs (1,388.90 kg) - Starting 2026
Tailgate (lb) 2,112.00 lbs (957.99 kg) - Starting 2026
Total, empty, with standard equipment (lb) 68,607.77 lbs (31,120.00 kg) - Starting 2026
Total, loaded, with standard equipment (lb) 150,765.14 lbs (68,386.00 kg) - Starting 2026

Powertrain

John Deere 410 P-Tier Off-Highway Truck Powertrain specifications
Auxiliary brake type Fully automatic; transmission-mounted gear-dependent; hydrodynamic retarder with selectable levels - Starting 2026
Axles differential Helical transfer gears, spiral bevel, hydraulically actuated PowerShift Cross-axle Differential Lock (CDL) - Starting 2026
Differential type Torque proportioning, planetary-type, Inter-axle Differential Lock (IDL) with PowerShift™ lock-up clutch - Starting 2026
Final drive type Extreme-duty outboard-mounted planetary; cooled and filtered oil - Starting 2026
Gear 1 forward speed (mph) 3.50 mph (5.63 kph) - Starting 2026
Gear 1 reverse speed (mph) 3.50 mph (5.63 kph) - Starting 2026
Gear 2 forward speed (mph) 5.00 mph (8.05 kph) - Starting 2026
Gear 2 reverse speed (mph) 5.00 mph (8.05 kph) - Starting 2026
Gear 3 forward speed (mph) 7.00 mph (11.27 kph) - Starting 2026
Gear 3 reverse speed (mph) 7.00 mph (11.27 kph) - Starting 2026
Gear 4 forward speed (mph) 10.00 mph (16.09 kph) - Starting 2026
Gear 4 reverse speed (mph) 10.00 mph (16.09 kph) - Starting 2026
Gear 5 forward speed (mph) 14.00 mph (22.53 kph) - Starting 2026
Gear 6 forward speed (mph) 20.00 mph (32.19 kph) - Starting 2026
Gear 7 forward speed (mph) 28.00 mph (45.06 kph) - Starting 2026
Gear 8 forward speed (mph) 34.00 mph (54.72 kph) - Starting 2026
Output torque front (%) 32.0 % - Starting 2026
Output torque rear (%) 68.0 % - Starting 2026
Parking brake type Spring-Applied Hydraulically-Released, driveline-mounted, dry-disk with a self-adjusting for pad wear - Starting 2026
Retarder type Integral, gear dependent, hydrodynamic, oil-to-air cooled, variable, fully automatic - Starting 2026
Service brake type Dual-circuit, hydraulically actuated, wet multi-disk, force cooled, inboard mounted - Starting 2026
Shift controls Fully automatic, electronically modulated PowerShift™, load-speed adaptive with gear skip and gear hunting protection - Starting 2026
Transmission Operator Interface Push-button FNR, selectable speed and gear range limits, selectable retarder aggressiveness, downhill decent control, and gear-hold. - Starting 2026
Transmission type 8-speed forward, 4-speed reverse, countershaft/planetary-type with integral retarder and torque proportioning differential - Starting 2026

Serviceability

John Deere 410 P-Tier Off-Highway Truck Serviceability specifications
Diesel-exhaust fluid (DEF) tank (gal.) 12.70 gal (48.07 l) - Starting 2026
Diesel-exhaust fluid (DEF) tank (L) 48.0 L - Starting 2026
Engine coolant (gal.) 23.80 gal (90.08 l) - Starting 2026
Engine oil capacity with filter (qt) 64.5 qt - Starting 2026
Front axle fluid, standard capacity (gal.) 16.40 gal (62.07 l) - Starting 2026
Fuel tank (gal.) 160.90 gal (609.01 l) - Starting 2026
Fuel tank (L) 609.0 L - Starting 2026
Ground-level service coolers Swing out coolers for easy cleaning; Optional reversing fans - Starting 2026
Ground-level service fluid and filters Ground level engine, transmission and axle oil level check and filter replacement. Ground level fueling, and fuel filter replacement - Starting 2026
Ground-level service fluid sampling Standard fluid sampling ports; Optional quick service ports - Starting 2026
Hydraulic reservoir (gal.) 46.50 gal (176.00 l) - Starting 2026
Mid axle fluid, standard capacity (gal.) 16.40 gal (62.07 l) - Starting 2026
Rear axle fluid, standard capacity (gal.) 18.00 gal (68.13 l) - Starting 2026
Transmission fluid (gal.) 15.90 gal (60.18 l) - Starting 2026

Steering System

John Deere 410 P-Tier Off-Highway Truck Steering System specifications
Angle, side to side (degrees) 45.0 degrees - Starting 2026
Lock-to-lock turns (rotations) 4.0 - Starting 2026
Type Two hydrostatically actuated, double-acting hydraulic cylinders; ground-driven secondary steering pump - Starting 2026

Suspension

John Deere 410 P-Tier Off-Highway Truck Suspension specifications
Front Semi-independent leading A-frame geometry with a transverse link for lateral restraint and self-leveling oil filled struts with integrated nitrogen charged accumulators - Starting 2026
Rear Load-equalizing, pivoting walking beams with laminated suspension blocks, tri-link geometry and transverse links for lateral restraint - Starting 2026

Tires and Wheels

John Deere 410 P-Tier Off-Highway Truck Tires and Wheels specifications
Optional size 875/65R29 - Starting 2026
Optional type Radial earthmovers - Starting 2026
Standard size 29.5R25 - Starting 2026
Standard type Radial earthmovers - Starting 2026
×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.