Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Differential | 3.538 |
|---|---|
| Final Drive | Planetary gear |
| Planetary | 4.737 |
| Rear | Full-floating |
| Capacity Struck | 37.9 cu yd |
|---|---|
| Dumping Angle | 48 degrees |
| Heaped (2:1, Sae) | 52.3 cu yd |
| Heating | Exhaust heating |
| Height At Full Dump | 28.10 ft (8.56 m) |
| Material | 160 kg/mm2 227,520 psi high tensile strength steel |
| Material Thickness-Bottom | 1.00 in (2.54 cm) |
| Material Thickness-Front | 0.70 in (1.78 cm) |
| Material Thickness-Sides | 0.60 in (1.52 cm) |
| Payload | 55 metric tons 61 U.S. tons |
| Structure | V-shape body with V-bottom |
| Target Area | 6600 mm x 3870 mm 21\'8\" x 12\'8\" |
| Brake Surface | Front- 1936 cm2 300 in2 ; Rear - 64230 cm2 9,956 in2 |
|---|---|
| Parking Brake | Spring applied, multiple-disc type |
| Retarder | Oil-cooled, multiple-disc rear brakes act as retarder |
| Secondary Brake | Manual pedal operation. When hydraulic pressure drops below the rated level, parking brake is automatically actuated |
| Service Brake | Front- Fully hydraulic control, caliper disc type; Rear- Fully hydraulic, oil-cooled, multiple-disc type |
| Differentials | 25.10 gal (95.00 l) |
|---|---|
| Engine Oil | 21.10 gal (79.86 l) |
| Final Drive | 11.10 gal (42.01 l) |
| Fuel Tank | 206.10 gal (780.09 l) |
| Hydraulic System | 32.20 gal (121.88 l) |
| Suspension | 14.70 gal (55.64 l) |
| Torque Converter, Transmission And Retarder Cooling | 56.80 gal (214.99 l) |
| Height To Top Of Cab | 14.44 ft (4.40 m) |
|---|---|
| Overall Length | 30.70 ft (9.36 m) |
| Turning Radius @ Centre Front Tyre | 27.89 ft (8.50 m) |
| Wheelbase | 14.11 ft (4.30 m) |
| Width Over Tires | 13.90 ft (4.24 m) |
| Alternator | 24V, 75 Ah |
|---|---|
| Batteries | 2 x 12V, 200 Ah |
| Starter Motor | 24V, 7.5kW |
| Air Cleaner | Dry type with double elements and precleaner, plus dust indicator |
|---|---|
| Aspiration | Turbo-charged,air-to-air after-cooled,cooled EGR |
| Bore And Stroke | 170 mm x 170 mm 6.69\" x 6.69\" |
| Displacement | 1,412.70 cu in (23,150.06 cu cm) |
| Engine Make | 2238 |
| Engine Model | SAA6D170E-5? |
| Engine Type | Water-cooled, 4-cycle |
| Fan Drive Type | Mechanical |
| Fuel System | Direct injection |
| Governor | Electronically controlled |
| Horse Power: Iso 9249 / Sae J1349 | 715.00 hp (533.18 kw) |
| Horse Power: Sae J1995 | 739.00 hp (551.08 kw) |
| Lubrication System | Method- Gear pump, force-lubrication, Filter-Full-flow type |
| Max Torque | 339 kg•m 2,452 lb. ft |
| Number Of Cylinders | 6 |
| Power Measured @ | 2000 rpm |
| Hoist Cylinder | Twin, 2-stage telescopic type |
|---|---|
| Hoist Time | 11.5 sec |
| Relief Pressure | 20.6 MPa 210 kg/cm2 2,990 psi |
| Standard Tire | 24.00-R35 |
|---|
| Forward | Torque converter drive in 1st gear, direct drive in 1st lockup and all higher gears |
|---|---|
| Lockup Clutch | Wet, single-disc clutch |
| Max Speed | 43.50 mph (70.01 kph) |
| Reverse | Torque converter drive |
| Shift Control | Electronic shift control with automatic clutch modulation in all gear |
| Speed Range | 7 speeds forward and 1 reverse |
| Torque Converter | 3-elements, 1-stage, 2-phase |
| Transmission | Full-automatic, planetary type |
| Empty Weight | 242,905.40 lbs (110,180.17 kg) |
|---|---|
| Gross Weight | 101,853.60 lbs (46,200.07 kg) |
| Weight Distribution Front - Empty | 47 % |
| Weight Distribution Front - Loaded | 32 % |
| Weight Distribution Rear - Empty | 53 % |
| Weight Distribution Rear - Loaded | 68 % |