Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Articulating/Rigid | Articulated |
| Dump Ground Clearance | 2.40 ft (0.73 m) |
| Dump Height | 19.70 ft (6.00 m) |
| Ground Clearance | 1.40 ft (0.43 m) |
| Overall Height | 11.90 ft (3.63 m) |
| Overall Length | 32.20 ft (9.81 m) |
| Overall Width | 7.30 ft (2.23 m) |
| Wheelbase | 16.60 ft (5.06 m) |
| Drive Config | 6x6 |
| Capacity - Heaped | 20.30 cu yd (15.52 cu m) |
| Capacity - Struck | 16.40 cu yd (12.54 cu m) |
| Dump Angle | 65 degrees |
| Lower Time | 7.5 seconds |
| Raise Time | 12 seconds |
| Rated Payload | 55,115.00 lbs (24,999.77 kg) |
| Aspiration | turbocharged |
| Displacement | 660.00 cu in (10,815.49 cu cm) |
| Engine Model | QSM 11 |
| Gross Power | 365.00 hp (272.18 kw) |
| Make | Cummins |
| Max Torque | 1,234.00 lbs ft (1,673.06 nm) |
| Net Power | 335.00 hp (249.81 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2100 rpm |
| Torque Measured @ | 1400 rpm |
| Alternator Supplied Amperage | 70 amps |
| Cooling System Fluid Capacity | 14.60 gal (55.26 l) |
| Engine Oil Capacity | 5.80 gal (21.95 l) |
| Fuel Capacity | 103.10 gal (390.23 l) |
| Hydraulic System Fluid Capacity | 53.40 gal (202.12 l) |
| Operating Voltage | 24 volts |
| Tire Size | 23.5R25 |
| Transmission Fluid Capacity | 16.70 gal (63.21 l) |
| Max Speed | 31.40 mph (50.53 kph) |
| Number of Forward Gears | 6 |
| Number of Reverse Gears | 3 |
| Transmission Type | ZF 6WG 260 RPC fully automatic |
| Center Axle - empty | 11,400.00 lbs (5,170.96 kg) |
| Center Axle - loaded | 34,325.00 lbs (15,569.58 kg) |
| Front Axle - empty | 25,240.00 lbs (11,448.69 kg) |
| Front Axle - loaded | 34,435.00 lbs (15,619.47 kg) |
| Operating Weight | 103,395.00 lbs (46,899.24 kg) |
| Rear Axle - empty | 11,640.00 lbs (5,279.82 kg) |
| Rear Axle - loaded | 34,635.00 lbs (15,710.19 kg) |
| Total Empty | 48,280.00 lbs (21,899.47 kg) |
| Total Loaded | 103,395.00 lbs (46,899.24 kg) |