Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Terex TA30 is an off-highway articulated dump truck designed for hauling material in construction, mining, quarry, and earthmoving applications. The TA30 is part of Terex's rigid and articulated haul truck lineup and is commonly used for transporting aggregate, soil, rock, and overburden across rough terrain. It features a high-capacity dump body, all-wheel drive, and articulated steering for maneuverability on uneven job sites. The model is typically powered by a diesel engine and built for heavy-duty cycle work in demanding conditions. Terex TA30 off-highway truck specifications vary by production year and configuration.
| Articulating/Rigid | Articulated |
| Dump Ground Clearance | 2.40 ft (0.73 m) |
| Dump Height | 20.10 ft (6.13 m) |
| Ground Clearance | 1.40 ft (0.43 m) |
| Overall Height | 11.40 ft (3.47 m) |
| Overall Length | 32.10 ft (9.78 m) |
| Overall Width | 9.50 ft (2.90 m) |
| Wheelbase | 16.80 ft (5.12 m) |
| Drive Config | 6x6 |
| Capacity - Heaped | 22.90 cu yd (17.51 cu m) |
| Capacity - Struck | 18.10 cu yd (13.84 cu m) |
| Dump Angle | 65 degrees |
| Lower Time | 7.5 seconds |
| Raise Time | 12 seconds |
| Rated Payload | 61,730.00 lbs (28,000.29 kg) |
| Aspiration | turbocharged |
| Displacement | 660.00 cu in (10,815.49 cu cm) |
| Engine Model | QSM11 |
| Gross Power | 385.00 hp (287.10 kw) |
| Make | Cummins |
| Max Torque | 1,310.00 lbs ft (1,776.10 nm) |
| Net Power | 333.00 hp (248.32 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2100 rpm |
| Torque Measured @ | 1400 rpm |
| Alternator Supplied Amperage | 70 amps |
| Cooling System Fluid Capacity | 14.30 gal (54.13 l) |
| Engine Oil Capacity | 9.00 gal (34.07 l) |
| Fuel Capacity | 103.10 gal (390.23 l) |
| Hydraulic System Fluid Capacity | 53.40 gal (202.12 l) |
| Operating Voltage | 24 volts |
| Tire Size | 23.5R25 |
| Transmission Fluid Capacity | 16.70 gal (63.21 l) |
| Max Speed | 31.70 mph (51.02 kph) |
| Number of Forward Gears | 6 |
| Number of Reverse Gears | 3 |
| Transmission Type | ZF 6WG 310 RPC fully automatic |
| Center Axle - empty | 11,685.00 lbs (5,300.23 kg) |
| Center Axle - loaded | 36,860.00 lbs (16,719.44 kg) |
| Front Axle - empty | 25,840.00 lbs (11,720.84 kg) |
| Front Axle - loaded | 37,040.00 lbs (16,801.08 kg) |
| Operating Weight | 111,308.00 lbs (50,488.52 kg) |
| Rear Axle - empty | 11,905.00 lbs (5,400.02 kg) |
| Rear Axle - loaded | 37,360.00 lbs (16,946.23 kg) |
| Total Empty | 49,430.00 lbs (22,421.10 kg) |
| Total Loaded | 111,160.00 lbs (50,421.39 kg) |