Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Articulating/Rigid | Articulated |
| Dump Ground Clearance | 2.80 ft (0.85 m) |
| Dump Height | 22.70 ft (6.92 m) |
| Ground Clearance | 1.80 ft (0.55 m) |
| Overall Height | 12.80 ft (3.90 m) |
| Overall Length | 35.80 ft (10.91 m) |
| Overall Width | 10.50 ft (3.20 m) |
| Wheelbase | 17.40 ft (5.30 m) |
| Drive Config | 6x6 |
| Capacity - Heaped | 27.50 cu yd (21.02 cu m) |
| Capacity - Struck | 20.30 cu yd (15.52 cu m) |
| Dump Angle | 66 degrees |
| Lower Time | 8 seconds |
| Raise Time | 12.5 seconds |
| Rated Payload | 74,956.00 lbs (33,999.51 kg) |
| Aspiration | turbocharged |
| Displacement | 855.00 cu in (14,010.97 cu cm) |
| Engine Model | Series 60 |
| Gross Power | 400.00 hp (298.28 kw) |
| Make | Detroit Diesel |
| Max Torque | 1,445.00 lbs ft (1,959.13 nm) |
| Net Power | 388.00 hp (289.34 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2000 rpm |
| Torque Measured @ | 1200 rpm |
| Alternator Supplied Amperage | 100 amps |
| Cooling System Fluid Capacity | 17.70 gal (66.99 l) |
| Engine Oil Capacity | 8.50 gal (32.17 l) |
| Fuel Capacity | 118.90 gal (450.04 l) |
| Hydraulic System Fluid Capacity | 87.20 gal (330.05 l) |
| Operating Voltage | 24 volts |
| Tire Size | 26.5R25 |
| Transmission Fluid Capacity | 16.20 gal (61.32 l) |
| Max Speed | 33.50 mph (53.91 kph) |
| Number of Forward Gears | 6 |
| Number of Reverse Gears | 1 |
| Transmission Type | Allison HD4560 fully automatic |
| Center Axle - empty | 15,707.00 lbs (7,124.58 kg) |
| Center Axle - loaded | 50,705.00 lbs (22,999.43 kg) |
| Front Axle - empty | 33,258.00 lbs (15,085.59 kg) |
| Front Axle - loaded | 38,094.00 lbs (17,279.17 kg) |
| Operating Weight | 139,509.00 lbs (63,280.30 kg) |
| Rear Axle - empty | 15,582.00 lbs (7,067.89 kg) |
| Rear Axle - loaded | 50,705.00 lbs (22,999.43 kg) |
| Total Empty | 64,547.00 lbs (29,278.06 kg) |
| Total Loaded | 139,506.00 lbs (63,278.94 kg) |