Caterpillar 613G Scraper Specs

Category: Scrapers ➔
Manufacturer: Caterpillar ➔
Model: 613G ➔

Dimensions

Caterpillar 613G Scraper Dimensions specifications
Front Of Tractor To Front Axle	115.50 in (293.37 cm)
Ground Clearance - Tractor	14.40 in (36.58 cm)
Height - Overall Shipping	125.60 in (319.02 cm)
Height - Scraper Blade Maximum	22.50 in (57.15 cm)
Height - Top Of Cab	10.47 ft (3.19 m)
Length - Overall Machine	410.20 in (1,041.91 cm)
Rear Axle - Rear Of Machine	48.10 in (122.17 cm)
Rim Radius	25.00 in (63.50 cm)
Wheel Base	20.55 ft (6.26 m)
Width - Inside Of Bowl	86.70 in (220.22 cm)
Width - Outside Rear Tires	95.70 in (243.08 cm)
Width - Overall Machine	95.70 in (243.08 cm)
Width - Rear Tire Center Lines	70.80 in (179.83 cm)
Width - Tractor	95.70 in (243.08 cm)

Elevator

Caterpillar 613G Scraper Elevator specifications
Length - Flights	66.10 in (167.89 cm)
Length - Overall	96.00 in (243.84 cm)
Number Of Flights	15
Spacing Of Flights	16.00 in (40.64 cm)
Width - Flight Face	6.90 in (17.53 cm)

Engine

Caterpillar 613G Scraper Engine specifications
Bore	4.00 in (10.16 cm)
Displacement	403.00 cu in (6,604.00 cu cm)
Flywheel Power - Tractor/Scraper	135 kW (181 hp)
Stroke	5.00 in (12.70 cm)
Tractor Engine	Cat C6.6 ATAAC

Hydraulics

Caterpillar 613G Scraper Hydraulics specifications
Bowl Cylinder Bore	4.00 in (10.16 cm)
Bowl Cylinder Stroke	16.50 in (41.91 cm)
Compensator Settings - Elevator Circuit	2498 psi
Ejector Cylinder Bore	3.50 in (8.89 cm)
Ejector Cylinder Stroke	36.00 in (91.44 cm)
Floor Cylinder Bore	5.10 in (12.95 cm)
Floor Cylinder Stroke	24.60 in (62.48 cm)
Relief Valve - Implement Circuit	2502 psi
Relief Valve - Steering Circuit	2756 psi
Scraper Circuit	85.30 gpm (322.86 lpm)
Steering Circuit	25.40 gpm (96.14 lpm)
Supplemental Steering Circuit	4.23 gpm (16.01 lpm)

Scraper Bowl

Caterpillar 613G Scraper Scraper Bowl specifications
Capacity - Struck	8.9 cu yd
Cutting Edge Thickness	0.90 in (2.29 cm)
Depth Of Cut - Maximum	6.30 in (16.00 cm)
Depth Of Spread - Maximum	22.50 in (57.15 cm)
Ground Clearance - Maximum	17.70 in (44.96 cm)
Hydraulic Penetration Force	62,946.00 lbs (28,551.86 kg)
Rated Load	26,400.00 lbs (11,974.85 kg)
Scraper Capacity - Heaped	11 cu yd
Width - Cut - To Router Bits	95.70 in (243.08 cm)

Service Refill Capacities

Caterpillar 613G Scraper Service Refill Capacities specifications
Cooling System	10.20 gal (38.61 l)
Crankcase	5.00 gal (18.93 l)
Differential	5.00 gal (18.93 l)
Final Drive - Each	1.50 gal (5.68 l)
Fuel Tank	95.00 gal (359.58 l)
Hydraulic Reservoir	33.80 gal (127.93 l)
Transmission	9.20 gal (34.82 l)

Standards

Caterpillar 613G Scraper Standards specifications
Brakes	ISO 3450-1996
Rops/Fops	ISO 3471-1994, SAE J1040-MAY 2003; ISO 3449-2005

Steering

Caterpillar 613G Scraper Steering specifications
Ground-Driven Secondary Steering System	4.23 gpm (16.01 lpm)
Hydraulic Output	25.40 gpm (96.14 lpm)
Steering Angle - Left	90 degrees
Steering Angle - Right	90 degrees
Width - 180 Degrees Turn	29.30 ft (8.93 m)

Tractor Engine

Caterpillar 613G Scraper Tractor Engine specifications
Net Power	181.00 hp (134.97 kw)

Transmission

Caterpillar 613G Scraper Transmission specifications
1 Forward	2.10 mph (3.38 kph)
2 Forward	3.50 mph (5.63 kph)
3 Forward	5.60 mph (9.01 kph)
4 Forward	8.90 mph (14.32 kph)
5 Forward	12.80 mph (20.60 kph)
6 Forward	24.40 mph (39.27 kph)
Reverse	3.6 mile/h
Top Speed - Loaded	24.40 mph (39.27 kph)

Weights

Caterpillar 613G Scraper Weights specifications
Front Axle	24,641.00 lbs (11,176.98 kg)
Front Axle Weight - Loaded	33,364.00 lbs (15,133.67 kg)
Rear Axle	12,588.00 lbs (5,709.83 kg)
Rear Axle - Weight - Loaded	30,266.00 lbs (13,728.44 kg)
Scraper Shipping	12,219.00 lbs (5,542.45 kg)
Total Operating - Empty	37,229.00 lbs (16,886.81 kg)
Total Operating - Loaded	63,629.00 lbs (28,861.66 kg)
Total Shipping	36,653.00 lbs (16,625.54 kg)
Tractor Shipping	24,434.00 lbs (11,083.09 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon