Case 1825B Skid Steer Loader Specs

Category: Skid Steer Loaders ➔
Manufacturer: Case ➔
Model: 1825B ➔

Dimensions

Case 1825B Skid Steer Loader Dimensions specifications
Angle of departure	31 degrees
Ground Clearance	6.70 in (17.02 cm)
Height - Top of ROPS/FOPS	70.10 in (178.05 cm)
Hinge pin height - fully raised	98.10 in (249.17 cm)
Length w/o Bucket	9.10 ft (2.77 m)
Wheelbase	2.80 ft (0.85 m)
Width Over Tires	3.30 ft (1.01 m)

Engine

Case 1825B Skid Steer Loader Engine specifications
Bore	3.10 in (7.87 cm)
Displacement	91.60 cu in (1,501.06 cu cm)
Engine Make	Kubota
Engine Model	V1505
Gross Power	27.00 hp (20.13 kw)
Max Torque	67.20 lbs ft (91.11 nm)
Number of Cylinders	4
Power Measured @	2400 rpm
Stroke	3.10 in (7.87 cm)
Torque Measured @	2100 rpm

Hydraulic

Case 1825B Skid Steer Loader Hydraulic specifications
Dump Time	1.2 seconds
Lower Time	2.5 seconds
Pump Flow Capacity	9.60 gpm (36.34 lpm)
Pump Type	Gear pump driven directl
Relief Valve Pressure	2300 psi

Loader

Case 1825B Skid Steer Loader Loader specifications
Bucket Width	48.90 in (124.21 cm)
Operating Load Rating	884.10 lbs (401.02 kg)

Operational

Case 1825B Skid Steer Loader Operational specifications
Alternator Supplied Amperage	30 amps
Chain Box Fluid Capacity - each side	0.80 gal (3.03 l)
Engine Oil Fluid Capacity	1.70 gal (6.43 l)
Fuel Capacity	8.60 gal (32.55 l)
Hydraulic System Fluid Capacity	5.80 gal (21.95 l)
Max Speed	5.80 mph (9.33 kph)
Operating Voltage	12 volts
Operating Weight	3,106.40 lbs (1,409.04 kg)
Tire Size	5.70 x 15 4PR

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon